Satellite P100 PSPA3A - Touchpad and function keys not working not

Similar Questions

• Backlighting and function keys not working not not on Windows 10

  Hello!

  After I updated my Windows 8.1 to 10, I lost my keyboard function keys backlight (volume, brightness, etc.) and the OSD that I used to have (similar to the OSX one).

  My Bootcamp has been updated via USB, after preparation on the Mac side. Now it's on version 6.

  I tried to manually reinstall, remove all what about Apple and relocation, etc., but nothing seems to help.

  Actually I was not able to remove the support of Bootcamp, because there was no option at this point.

  My MBP is mid-2012.

  Do you know what I can do to fix this?

  Thank you!!!

  Gustavo

  In your device manager, you have the Apple keyboard driver? You have an element of Bootcamp in the Panel?

• Touchpad and F9 keys stopped working

  The touchpad has stopped working and the F9 key does work more for the touchpad.  How can I fix it?  It's a Toshiba Satellite laptop.  Other F keys still work.  There used to be a drop-down list on the desktop for the F keys, but it doesn't work either.  In the properties of the touchpad driver, disable is grayed out.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  You can download but not install the drivers before the the below if you wish.

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  REBOOT - it will refresh the driver for the TouchPad and USB stack. This does not prevent the
  Touchpad work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Touchpad and some keys not working do not due to static electric shock

  This is an unusual problem - maybe someone can shed some light on this, and (especially) thoughts towards fixing the problem would be GREATLY appreciated.

  Yesterday, I got my ACER Aspire 1830 t series netbook (Windows 7, 32-bit) and a little shock to receive static electricity - nothing major, exactly as happens when you touch anything with metal (especially in winter?), right. However, it has caused a few problems:

  1. first of all it has caused my netbook to a hard cock down.

  2. once I rebooted the system, the touchpad did not work.

  To restore functionality to the touchpad, I tried the following until now:

  • FN + F7 (toggle to turn on/off the touchpad) - IS NOT WORKING.
  • Reboot - IT DID NOT WORK.
  • Use a wireless mouse - Fortunately, IT works.

  3. I was about to try to reinstall the driver for the touchpad when I noticed that some other normal keys have lost a few perfect. For example, I can no longer hold the BACKSPACE key or the arrow keys to a continuous function - they only move a space at a time, so I have to stay here by tapping it again and again.

  So far, I are not noticed a problem of corrupted files or programs, so maybe that's more a hardware problem than a problem of driver/software.  Is it possible for static electricity incinerate a wire or something?

  Any help would be greatly appreciated. This baby is only a few months out of warranty...

  Thank you very much!

  Try to unplug the power, remove the power battery button and press on for 20-30 seconds, it stays for a while and try to turn it back on, I'm not sure if it will solve but worth it.

• Satellite A10-S177 touchpad and keyboard do not respond

  After that I updated the drivers for my keyboard and touchpad, they usually answer or freze when the startup screen, xp appears.
  Oh and it works before that.

  What can I do?

  Hello

  Sorry mate but I put t understand how you have successfully updated the keyboard driver?
  The keyboard driver is part of the Windows operating system, so it cannot be updated manually

  Check to see if you can boot into safe mode.
  Press F8, and then choose Safe mode. Then you can try to reverse the BONE at the beginning point of time before the OS was confused upward.

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Satellite A210: Synaptics TouchPad and the fn in Win 7 do not work

  I have a Toshiba Satellite A210 11 t (PSAEGE). Tired of Windows Vista, I changed to Windows 7.

  Everything works well except the Synaptics TouchPad and the key FN. Does anyone have ideas on this?

  Hello

  You must install the driver for the touchpad, VAP and Toshiba Flash Cards Support utility.
  I've got the A210, and I chose all the Windows 7 drivers released the Satellite L500 series.

  It worked correctly

• function keys not working not not toshiba satellite P875

  My laptop is fairly new, less than 6 months, and I regularly put updated, but for some reason, all my function keys stopped working. The only thing they do, it's me enter and exit full screen in chrome mode. Really annoyed on this subject and any help is appreciated.

  Probably as a result of some update optional / recommended that you have installed, if you don't know not what updates have been installed when this problem first occurred, visit the support site of Tosh for your model and reinstall the correct of there drivers

• DVD_Rom recovery for Satellite P100 (PSPA3)

  Hello

  I have a Satellite P100 (PSPA3) laptop, who originally XP MCE.
  Unforunately I accidentally lost my Recovery DVD-ROM.

  I always the serial number under the laptop. If you think that Toshiba could provide me the version XP MCE? Is there anywhere I could download another version that corresponds to the laptop I have? If this is not the case, everyone don't know if I can still buy this DVD from Toshiba?

  Do you know where to buy Windows XP today?

  Any help wil be appreciated.

  Thank you.

  drmattos

  Hello

  No, as far as I know, you can download a picture of Toshiba.
  There is an online platform where you can order a Toshiba Recovery disk but I think your unit is too old.

  However, you can try the site:
  http://backupmedia.Toshiba.EU/landing.aspx

  If it is not possible to order the disk, you need to install the Windows system and the single drivers can be downloaded from the Toshiba driver page.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• A210-17i XP function keys not working not

  Hey, I bought a Notbook Equium model: A210-17i, I downgraded to XP, and I need the function keys to work.
  It doesn't seem to be all the drivers available to me, if someone can please help me find?

  Any help would be appreciated!

  Have you installed all the drivers from Toshiba?

  Be sure to only install the driver Hotkey, modules, FN-Esse, Toshiba common controls. An update of the BIOS can also help :)

• Touchpad and mouse does not scroll on AOL or Fox News site

  Original title: mouse and keyboard does not not on the first page of web sites.

  \When opening site Internet AOL or Fox News, my touchpad and mouse does not scroll.  In addition, the normal ads that appear on AOL and the Fox new sites do not appear.  Touchpad and mouse work fine on the facebook page.  I can't click and close AOL and Fox News.  I run a system check total notron and restore systems affecting a couple of days, when everything worked well.  Any ideas to solve the problem?

  Hello

  1. what web browser do you use?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. you receive an error message?

  5. have you made changes on the computer before this problem?

  Step 1:

  If you use Internet Explorer, you can view the following link.

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  Step 2:

  You can see the following link.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

  Please provide us with more information to help you further.

• Update problems - touchpad and keyboard do not work!

  After you install an update, the touch pad and the keyboard on my laptop won't work.  I was able to use a wireless mouse, after a few failed attempts.  Any suggestions?

  Hi jennkjohns,

  1. what happens when you connect the keyboard to the computer?

  2. what update has been installed on the computer?

  Method 1

  First of all, I would say you visit your laptop manufacturer's website to download and install the updated driver for the touchpad and check if it works.

  Check in the Device Manager, the State of the keyboard.

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Method 2

  Checking update was installed before that the problem occurred.

  (a) updates installed open by clicking the Start button, click Control Panel, click programs

  (b) and then, under programs and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the link below to learn more about how to clean boot in Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Someone else has volume function keys stop working?  If so, I know a fix?

  Sometimes, my function keys stop working.  The small volume box appears and the volume is shown to change but there is no real effect on the volume.  Anyone know a fix for this other than to restart the computer?

  you have speakers connected, secure, powered?

  helmet?

   > System Preferences > Sound

  What is your output on?