Portege R100 CPU

Similar Questions

• Portege R100 - CPU usage 100%

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  It has nothing to do with your computer - this is the trident driver problem - there is a work - around
  Try changing your display configuration-

  (1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
  (2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
  (3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applications

  If my post is not detail for you
  Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructions

  That will solve your problem!

  Good luck and enjoy your nice laptop!

  Arthur

• Portege R100 - CPU up to 100% usage during execution of foobar2000

  Hello!

  Everyone knows about this problem?
  My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.

  Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.

  When to begin the file search engine, when I update the list of wireless networks and when I add files to foobar 2000, CPU usage shows 100% and everything is so slow that I can barely move a cursor.

  Everything goes back to normal once I closed above applications.
  I can install all drivers and all right, but after Trident display it is bad.

  This is the driver I use since I bought the laptop, I do not know that is fine.
  I installed it several times before and I have a few copies of it, which I've already tried so it must be good.

  The cross thing only my mind is a hardware failure.
  Someone of you knows than before?

  Thank you...

  Hello

  Foobar2000 is unknown to me and have no experience with this tool, but it is clear to me.
  You said that the CPU goes up to 100% when running this tool.

  Well, this tool is responsible for the use of the CPU! Why? I put t know.
  Maybe you should contact the manufacture of this software for more details!
  http://www.foobar2000.org/?page=support

  Good bye

• Portege R100 freezes - CPU fan is defective?

  I ' v was Portege R100s for a long time, maybe 7 years old, I am at my last one.

  I'll be back from it after eating and the XP screen froze, no mouse movement, CntrlAltDel did nothing. Press and hold the power button it stopped.

  Now I can start, but it freezes again in a very short time, a few minutes. I'm guessing that the processor fan is stopped.
  Not tht sounds good to people, it's a realistic possibility to cannibalize the carcass of my previous and hang the fan of my current group?

  Thank you

  Of course, it could be linked to the question of the CPU.
  If the CPU wouldn't be cooled correctly then the system can stop to answer.

  Are you sure that the fan has stopped working?
  If yes then the cooling module must be checked and replaced by the compatible.
  You may not use the cooling modules. It should be compatible.

  But to be honest, I think that the RAM modules need to be checked also
  In most cases, a RAM problem is more realistic as a defective cooling module

  My old laptop has stopped working because one of the RAM slot is faulty
  I delete a module and the laptop worked using a single module of RAM
  However, I couldn't use it as I wanted and I bought the new notebook.

• USB 2.0 blue screens on Portege R100

  Hello
  I have a Portege R100, when you insert a USB 2.0 device it blue screens and you can t do something. But if you insert a USB 1.1 device, he is very well, I tried the upgrade to Windows XP sp2 and this t hasn't helped any ideas.

  Thansks

  Hello

  Try to remove the USB entries in Device Manager, and then restart the device. The ports should be recognized and installed correctly. In my view, it cannot happen without any reason. It will be interesting to know since when this problem started.

• PORTEGE R100 CD-ROM recovery problem

  Hi, I had a few problems of recovery PORTEGE R100. My problem is that when I try to reinstall the system with the recovery of the boot disk CD, it does not recognize the CD. The CD-ROM is not a TOSHIBA product. Is there any solution for this?

  Hello

  It will be interesting to know if your external CD is a USB or PCMCIA device.

  You must make a Windows startup disk and add drivers for your CD-ROM BACK drive and then you should be able to recover the machine with this CD.

• Portege R100: Duplicate UUID

  I recently got a few laptop computers Portege R100 Toshiba back after repair.

  It seems that some of them have the same UUID and this causes problems with our asset management system that uses as primary search key.

  Does anyone know of a tool that I can use to reset the UUID on a Toshiba Portege R100?

  Hello

  Perhaps these URLS will help. It contains a UUID generator and a brief description of the UUID!

  http://Kruithof.xs4all.nl/uuid/uuidgen

  Sammy Bye

• Problem of Eve Portege R100

  Dear friends,
  I have a problem with my newly purchased Portege R100. When I try to switch (or in hibernation mode, in fact), it starts the process and then stops and displays an error message saying that it is in conflict with the keyboard player and I might need to update this.
  Of course when I try to update, it shows not any update for the keyboard drivers.
  I was wondering if anyone has experienced the same problem and how you solved it.

  Thank you
  Riccardo

  Hi Riccardo

  As far as I know, this problem may occur if you use the external keyboard because for now what laptop enters standby or hibernation to stop all active processes. Now there may be some conflicts because many programs or processes can make the problems by putting off circuit.

  The external keyboard?

• Portege R100: Recover the CD USB 2.0 drive?

  I need to reset my Portege R100 to factory settings, erasing the hard drive and remove all documents and programs. I don't have a Toshiba CD-ROM drive, only a CD/DVD of LaCie USB 2.0 drive. It worked with other laptops, but I can't get the R100 to start with it.

  Does anyone have a suggestion?

  Hi soren,.

  Maybe you know that you can start from the CD-ROM when you push the 'C' button for aprox. 3 seconds when you press the power button. But it's only for internal solutions.
  In your question, you could test whether it works when you push "U". 'U' stands for USB device!

  Hans Bye

• Display Driver Portege R100

  Some time when I use certain software applications, the images on my Portege R100 distorted. Why does this happen?

  Apparently, there is a bug in the display driver in Portege R100. You can update the PC with an improved display driver, V6.4823.104.22_2 to avoid this.

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Portege R100 and Linux - function keys not working do not and the latest version of the BIOS?

  Hello world

  I have a Portege R100 (PPR10L-13G10P). I am trying to install Linux and when you try to access function keys (F6) the computer does not allow me to... no idea why?

  Also, what is the latest version of BIOS for this computer? And where it can be downloaded?

  Thanks in advance!

  Terrence

  Hello

  At first, I must say that Toshiba doesn't support Linux in general if you are alone with this problem.
  I hope that someone will be able to help you a bit.
  If you want to discover the latest version of the BIOS, just enter the BIOS settings and check it out.
  BIOS version latest won't help you at all, so my opinion is that you shouldn't change anything.

  Anyway, the bio download page is - http://www.toshiba.eu/innovation/download_bios.jsp

  The feature keys F is supported by special tool Windows and it only works on Windows.

• Wireless connection on Portege R100

  I have a couple of portege R100. When you connect to my domain, using the wireless connection, the logon scripts fail to run the first time. If you log out, then log in again, the script will run without problem. Y at - it a fix for this problem?

  Hello

  Unfortunately have no proper explanation, but I guess that WLAN cannot be connected so fast that LAN and it may be the reason why the first logon fails. In my opinion it has nothing to do with the functionality of the device and this is just a feature of network.

  Maybe some WLAN expert can give you a good explanation.

  Good luck!

• Portege R100 and new hard drive

  I think to put in a larger capacity internal hard drive - 40G is now a little bit :(

  Does anyone do this? The traps? Any suggestions on compatible drives?

  TIA

  Hello

  As far as I know the old Portege R100 supported a HDD IDE controller.
  So you will definitely need an IDE HDD. I think that it s a 1.8 IDE HDD.

  I think the HDD IDE controller supports only the 28-bit LBA and it would mean that there would be larger than 120 GB hard drives not recognized.

  That's why I choose smaller hard drives.