Portege R400: How to get notification on screen edge new mails, meetings in Vista

Similar Questions

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• Portege R400: How to get embedded HSDPA 3 G working

  Does anyone know how to get the Embedded R400 HSDPA 3 G working?
  I put a SIM from work in the slot under the keyboard, but when I click the mobilink software, that nothing is happening.

  Thank you

  Hello

  I found something that may be of interest to you. It is about 3 G on your laptop:

  When you insert SIM the laptop must be turned off, because normally hot - plug the SIM card does not work
  The 3G module is set on/OFF with the cut-out like the other two standards wireless WLAN and BT wireless
  By default, the wireless switch is set to OFF
  Your laptop is preinstalled new FN + F8 tool with which you can switch all devices or on/OFF switch, none of the 3 devices individually
  After each start of the laptop (if the message was not disabled) there will be an information window informing you that the 3G antenna shuts off if the Tablet PC is used in secondary portrait mode (for Tablet laptop computer only)

  Please check it and also read s manuals carefully. It must be described how to use 3G on your laptop Portege.

  Good bye

• I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  There are two ways to create a PDF on a Mac:

  (1) you can use the default method, which is to choose file > print. Click on the PDF menu below on the left, then click on save as PDF. This lets you name and save the PDF file using the mechanism of OS X to create PDF files.

  (2) in the same menu, you can save in Adobe PDF format. It runs a script (a little slow) that lets choose you what PDF settings file you want to use. This is the Adobe-developed mechanism that replaces the old Virtual PDF printer.

• How to get to the BIOS on new XPS 8700?

  How to get to the BIOS on new XPS 8700?

  This is a brand new machine with Win 8.1, a SSD boot drive, etc.

  I need to get in the BIOS so that I can prepare for the recovery with Acronis backup program. This program will generate a recovery disk or flash drive. If my boot drive does not start, I will use the recovery point, but I need to have the BIOS first try to start from that before the C drive.

  Reading messages on the Acronis forum, I heard for the first time on UEFI - I barely understand what it is - but apparently, a replacement for the BIOS?

  Is it likely that my new machine has UEFI rather than a BIOS? and how do to it? Press a function button for the system to start? A person on the Acronis forum suggested to win 8.1 to restart and hold the SHIFT key while doing.

  I do not experiment on my PC unless I am sure it is the right method. This is my 4th Dell-all previous versions came with a manual that could give me the answer to a question like that.

  The "missing manual" is perhaps on the Dell website?

  Joe

  Your system is UEFI.

  As the UEFI systems start very quickly, you start typing (do not hold) F2 as soon as you power on open configuration. Otherwise, it will just start normally from the hard disk.

  Alternatively, you can start to type F12 as soon as you turn on that should give you a start with options menu to boot from the optical drive or USB. Note: To boot from USB FlashDrive bootable is connected before you turn on the system, otherwise it does not appear as an option in the menu of F12.

  See page 82 in the Manual.

• Portege R400: How to enable the TPM in the BIOS

  I have the Porteg R400.
  The TPM is asking me to activate it TPM chip by setting the bios, but the bios setting there is not the activation setting.

  This means that it is not the TPM chip installed?

  Hello

  AFAIK the Portégé R400 supports the TPM chip, but it must first be activated.
  The special BIOS upgrade is required to activate this option.

  But it's a little tricky to my knowledge only the Toshiba certified maintainer can do that.
  So I would recommended contacting the service guy and ask a technician for more details!

  Do you know how to contact the ASP?
  On the Toshiba page you will find a list with ASP available worldwide.

  Check it ;)

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• How to get ringtones purchased from my new camera

  How to get ringtones I bought on Apple devices prior to my new device from Apple iPhone 5 s when I use the same iTunes account? the title of the purchase I see my music from my iPhone, and not all of my music from my previous devices that I bought are there, but what of my purchased so ringtones? None of them are appearing

  Tones are a unique download only, they will not appear in purchased for redownloading. If you have them in the section of tones from your computer's iTunes library, you can synchronize the phone from there, if they are only on your backup of your library of downloads / you can add to your computer via file iTunes library > add to library so that you can synchronize. Or if you still have your old appliances with them to connect to iTunes on your computer and file > devices > transfer purchases and you can then synchronize with your new phone.

• How to get rid of the old and always offered updates - Vista

  Hello, I have Vista and it offers me a very old version of the updates to be updated and for this reason I can't get/retired new updates... Update window keeps on telling me that I have 165 updates to be downloaded and installed... It happened after re-installing the operating system as 4months ago and even after the automatic updates when I changed the settings to ask me before auto update... So I tried to make them hidden, but after each reboot, Vista offers me the same old * I don't want to have on my computer because after a re-installation of the wi - fi stopped working and I had to download the new drivers on the computer of my gf. Does anyone know how to get rid of them? Where a list or scheduled updates are stored? Thank you very much, I like Vista. He brought me only good times with my computer. Tomas

  Hello

  Follow these steps and check if that helps.

  Step 1:

  I suggest you to reset the updated Windows components and check if that helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Step 2:
  Problems with the installation of the updates.

• How to get the computer on the new CS6

  Hello

  Years, I bought CS3 and still have the disk. In 2012, I've upgraded to CS6 which was a download. Need to buy a new computer today. I was able to get the drive icon on the desktop of the new CS6 computer. However, when I try to install it, a message "invalid serial number" appears even if I still have the original box. CS6 serial number has also been tried just in case where.  I understand that adobe will allow up to 2 computers to use the software. Can someone help me get the program on the new iMac?

  TIA,

  Theresa

  CS6 will first have to CS6 serial number.

  Then it will ask a qualifying serial number (since it is an upgrade), and you enter the OLD serial number.

  Don't forget it is compatible with the system on your new computer, CS6 is old and support.

• How to get the control screen to return to the size was about Windows Vista Edition Home Premium

  HOW HE CAN GET THE SCREEN ON MY MONITOR TO PORTRAIT SIZE.  SOME HOW I SLAP ON A TOUCH KEYBOARD ON ACCIDENT & THE SCREEN IS 90 DEGREES TO THE LEFT...  HEAD TO SEE TILT SCREEN. ON THE SCREEN OF THE MONITOR FET IS PLACED IN A POSITION OF LANDSCAPE...   I DON'T KNOW HOW DO TO MAKE TURN IN THE CORRECT POSITION.

  THIE COMPUTER I AM INQUIRING IS THE TOP OF MY DESK.   I USE MY LAPTOP TO FIND OUT A SOLUTION.   I HOPE SOMEONE CAN HELP. ?

  Hello

  To bring your screen to normal hold down Ctrl + Alt and press one of the arrow keys on your keyboard.

  Or you right-click Desktop select Graphics Options > Rotation.

• Please tell me how to get this blue screen error and "pop - up to warning off my screen". I can't use my laptop HP Pavillion with Windows 7 yet.

  Apparently, I have a virus. The episode began with an announcement of repair that kept popping up when I arrived at my first website through google Crome. This is the address "... peep...» "something. He said that I had to call a tech to 844-332-2558 microsoft and they would help me to solve the problem. So I did and discovered that it would cost me money. Now I don't know if this has anything to do with it, but I fell for the free 'update' thing to Windows 10. I hated this upgrade, couldn't use it and could not know even where to go to understand. Then, after much hassle and I mean DAYS going from one place to another to return to windows 7, I downloaded the "Magic jellybean" sahow me how to find the "product key" to go back to 7. You see, in 2013 or 2014, that I went to Missouri to help a friend who could undergo surgery. I bought this laptop in a pawn shop (Tiger pawn in Columbia, Missouri). It did not come with an installation cd. I already have t PROVIDED with Windows 7 on the laptop. When I tried to go back to Windows 7 from windows 10, and received the product of the drive key, well, when I entered on the screen provided, he says that the key is incorrect. I went cross-eyed trying to verify the accuracy of what I entered a second time. I called Microsoft who directed me to HP. HP said that this loaptop was conducted in Iran, according to me, he said. In any case, they said they couldn't help. Long story short, I finally was able to restore a setting the date early and returned to 7. BUT, since I get a msg saying that I didn't have a "true copy" of Windows 7. This msg is permanently on my rt, lower corner of the plate. Now I have this error screen and use my lap top. It's the whole story!

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  The episode began with an announcement of repair that kept popping up when I arrived at my first website through google Crome. This is the address "... peep...» "something. He said that I had to call a tech to 844-332-2558 microsoft and they would help me to solve the problem.

  He's a crook. Ignore them, block it and delete.

  Avoid the scams of tech support phone - Microsoft

  and

  Support scam - Wikipedia, the free encyclopedia

  Is there a COA sticker attached to the laptop that might be able to tell what version and edition are pre-installed?

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• the poster of the Bookmarks window is too big (suddenly occurred with the new version). I can't figure out how to get the smaller screen. Zoom does not work on the display of the menu bookmark.

  I have the 4 version, just download and a Mac OS 10.6. w. 7.
  Display the bookmarks (when I pull to the low "bookmarks") is far too broad. I can't understand how to reduce the display size. The window is not persistent, so I can't yet get you a screenshot.
  Thank you, Sara

  It seems that there is a change in Firefox 4, where the width of the drop-down list is now determined by the length of the longest bookmark name in the displayed folder. Versions previous of Firefox would be to shorten a long name like this and add an ellipsis to indicate the name has been truncated.

  Sorry, I don't know how to change it otherwise that you advise to change the name of this long bookmark name and make it less wordy. Just scroll to the bottom of the list of bookmarks in this vast folder until see you the culprit, then right click on that bookmark and open properties and change the line of name at the top of this dialog box.

• Qosmio G20: How to get the higher screen resolution on monitor external 22 "

  I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

  I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
  1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

  What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

  If someone is so good!
  Espen.

  Hello

  The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

  Perhaps an update of the graphics driver could help.

  By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

  Check also these forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767