Portege R600 / A600 and double output screen

Hello

Could you tell me if it is possible to output to two screens on the R600 or A600 with any of the Toshiba Docking solutions?

I was told that it is possible, however I was told today by the sales of Tosh is not possible to do. I want to end my home pc and the desktop pc and just wander between the two with a laptop. However, I use an extended desktop on both screens and would need this work.

Any advice on that?

Thank you

Paul

Hello

As far as I know you can t use two external displays. It is only possible to use the internal LCD screen with * a * external LCD display. That s what you can do.

But I put t understand why you want to use two external displays the internal display is good, you can extend the Windows desktop on an external monitor.

Tags: Toshiba

Similar Questions

  • Portege R600-Q10 and Port Replicator II

    Hello! I have a small problem... I got Toshiba R500 and PRII Porteble, but now I can't find this phone in my country.
    So I think on Toshiba Porteble R600-Q10, but I can't find it works on PRII.

    I know that PRIII is OK but I don't wonna buy new duplicator...

    Matt

    I'm afraid with this model of laptop, you can use slim port replicator III concluded.
    Check it HERE.

    http://laptops.Toshiba.com/accessory/PA3681U-1PRP

  • Portege R600 left and click right button annoys everyone is close

    I had assumed that this sound is configurable, but apparently the loud click every time you press the left or right button can not be stopped.
    Disappointing!

    Some people like it some do not.
    What should do? Nothing.

    He like you or hate you.

  • Portege R600 of fingerprint problem: error: could not open the specified database

    Hello

    I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
    I tried also on windows XP and Vista.

    Has anyone with the same problem or anyone suggesting a solution?

    I uninstalled the truesuite Access Manager but still the same problem.

    See you soon.

    Hello

    I noticed a new update for software fingerprinting for protected R600.
    Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
    Then reboot again.

    Download the fingerprint on the page of the European driver Toshiba Software and install again.

    Check it out!

  • Portege R600 - where can I find the order of installation on Vista x 64?

    Hello

    I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.

    Any help would be appreciated.

    Regards, Richard.

    Hello

    There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
    -Chip Set Utility
    -Display driver
    -LAN Driver
    -Driver Lan Wireless
    -Sound Driver
    -Intel Active Management Technology (AMT)
    - and so on...

    Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
    The SATA driver is part of the Intel Storage Manager.

  • Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

    I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
    I spent many fruitless hours talk to Adobe to try to solve this problem.

    They concluded that my laptop is not compatible with the software.
    This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

    The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

    > They concluded that my laptop is not compatible with the software.
    That s just absurd

    The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

    If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
    For example, using the IE7 you could modify this here:
    Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

    You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
    To do this, I would recommend using the free CCleaner tool.

    Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
    http://www.Adobe.com/support/reader/

    Check it out!

  • Portege R600 - y at - it a radio available internal broadband?

    Our previous laptops had internal radios from Sprint for access to broadband.
    Sprint will give us external modems for the R600, but it would be great if there was an internal option - one less gadget to drag around.

    Is there such a thing?

    Thank you!

    Hello

    To be honest I m not Portege R600 owner but I searched a bit the Portege R600 properties and specifications and unfortunately I didn t find all the details about this feature, so I doubt that this is possible with the Portege R600.

    Greetings

  • How do I know of Portege R600 wireless card?

    I have a Toshiba Portege R600-101 and would like to know what Wireless LAN card I have, to know what driver I need to download.

    Using Device Manager is not an option, because I reinstall windows and now it does not recognize the card. How can I see this?

    Hello

    I think you can use Device Manager to find out what is the WLan card.
    In-network cards > Device Manager, you can find the WLan card. Its should be listed as unknown device or Ethernet controller

    Mark it and go to properties.
    On the Details tab, you will find the DEV PCI ID and the VEN ID

    You can use this database to search for the vendor id and the device id.
    http://www.PCIDatabase.com/

  • Portege R600 - cannot create recovery DVDs

    Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

    Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

    Hi Dmitry_3,

    Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

    In this case, it might help remove upper and lower filters:
    + 1) run Regedit (start-> Run-> Regedit).
    + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
    + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
    + 4) reboot. +

  • Re: Disabled the connection Wireless on Win 7 - Portege R600

    I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
    When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

    I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
    BT Stack, etc.

    Does anyone have an idea?

    Hello

    Wait a minute;
    You want to activate; Modem WiFi or 3G?
    Please note that WiFi is not 3G modem.

    Don't forget that you have chosen and activated the modem 3G and not the WLan.

    Welcome them

  • Portege R600 and Windows 7

    I installed Windows 7 (custom installation). Subsequently installed the Toshiba Setup program to load all the programs/drivers concerned. I have a problem with the screen, especially in Word 2003. That she will all suddenly, distort so that the words become faded/pointed/double, so that you can not read the display. A second open the document in Word will not be affected. Re-opening and closing the particular document clears the problem. The document is late and is not damaged.

    Also found that sometimes when start up or wake up from hibernation, the machine hangs and looks like the fan is working overtime.
    Nothing happen so unless I have a power to force down and restart.

    Finally, the wheel on my mouse (latest Windows 7 drivers installed) will not work to resize a screen of Word and will not work in the folders pane in Outlook 2003.

    Any thoughts?

    See you soon

    Strange! I installed Office 2003 on two laptops Toshiba with Win7 and everything is OK.
    Have you noticed some other display under your Portege R600 Win7 problems, for example in Internet Explorer or other applications running?

  • Portege R600-11b - screen is very low

    Hello

    The screen on my Portege R600-11b disappeared suddenly extremely dim. There is no problem with him coming back to life after hibernation - but he remains coems back extremely dim. Light blinks until when I press the button in the upper right corner with a symbol of the Sun.

    I think I might need a FL inverter? Do you know how do I know which I need and instructions on how to fit it?

    Also I had problems with Windows 7 Professional turning very slowly. I'm assuming that the two problems are not related.

    Hope you can help, thanks.

    Hello

    I recommend connecting an external monitor.
    If the image on the external monitor would be perfect, then your internal screen or inverter maybe FL needs to be replaced.
    You ask how to check this?
    Well, I'm afraid of each part should be checked using another good part tested m.

    In your case I would ask a support specialist
    Guarantee is valid? If yes then I recommend to contact Toshiba service in your country.

  • Portege R600 and Webcam in Skype functionality

    Hello!

    I tried to get the camera working on the Portege R600 within Skype.

    I got it in the past, but he stopped and now I just get a black screen when I load the video in the settings. I tried specifying the default camera and also the chicony usb 2.0 camera two identical results of both. I updated to the latest version, earlier and removed and he readded in Device Manager. No luck.

    Any ideas? Running fully patched Vista 32 bit

    Hello

    I'm not very well why this happens, but I see that you use the Skype of m.
    Some people have reported some problems with the webcam and 3rd party software like MS messenger and Skype for example. Both applications use the webcam also.

    I think there could be a problem with software compatibility between the software/driver preinstalled webcam and the Skype/MS Messenger

    You said that too that everything has worked in the past, as well, that would be really interesting to know if the problem would be persists using the laptop with the factory settings Toshiba and without a Skype or other additional software installation.

    Good bye

  • No Audio or USB ports with Port Replicator 3 and Portege R600

    I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

    I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

    A few things to try:

    Reinstall the Toshiba Value Added Package.
    Use system restore to restore Windows to a previous state.
    Check the connector for docking station for damage.
    Back up your data and perform the recovery.

    If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

  • Portege R600-13Z: need screen part number - UK suppliers?

    Portege R600-13Z
    Need to buy a new screen - suppliers in the United Kingdom or a reference number needed?

    Thank you very much

    Hello

    I put t know the part number, but as far as I know that you need a * 12.1 WXGA (1280 x 800) widescreen mast *.
    Generally any Widescreen Matte 12.1 WXGA (1280 x 800) should be compatible with Portege R600.

    But if you want, you can get in touch with a local ASP from Toshiba and could order such screen from guys

    Here you a discovery of a data base with all FSA worldwide:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

    Good luck

Maybe you are looking for

  • P6-2285eo: the GPU upgrade in my office of p6-2285eo friends

    Hello.  My friend has a p6-2285eo office. It works fine and everything. However, he would like to improve its gpu, as GT 640 is detrimental to its performance in the games.  That's why I sold him my old R9 280 X (model XFX). And I got a new power sup

  • Windows7 on Qosmio G30

    I need serious help with my laptop Qosmio G30-163 of Windows XP MCE upgrade > windows 7. I ve run the Advisor to upgrade several times, but won´t still go through the installation If you can help me then ask my Skype and we can run it all french. Sin

  • Saving data of deformation

    I have a hard time to control the sampling frequency for the data of deformation when using the DAQmx for strain, which is completely identical to the app to express signal for the strain. For some reason any affecting the control single sample size

  • Windows Contacts folder format

    How do you attribute the views of records to a specific group of files? I need to be able to ensure that the Contacts Windows folders display correctly, without changing the format of one of my other records. How can I format files of Windows Contact

  • Is there a change to use mediaPlayer with InvokeManager?

    Hi I used mediaPlayer with InvokeManager to play streaming video But recently the mediaPlayer is unable to read the file Perhaps because upgrading to the new operating system It's my job void DetailPage::invokeMediaPlayer(QString aUrl) { InvokeManage