Portege R600 - Dynadock displaylink installation failure

Similar Questions

• Portege R600 - where can I find the order of installation on Vista x 64?

  Hello

  I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.

  Any help would be appreciated.

  Regards, Richard.

  Hello

  There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
  -Chip Set Utility
  -Display driver
  -LAN Driver
  -Driver Lan Wireless
  -Sound Driver
  -Intel Active Management Technology (AMT)
  - and so on...

  Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
  The SATA driver is part of the Intel Storage Manager.

• Portege R600 - performance SSD limited by SATA 1.0

  Hello

  I have improved my Portege R600 - 13 X replace SSD HARD drive (Sandisk Ultra Plus / SATA 3.0)
  This laptop has the Intel® GS45 Express chipset supporting should SATA 2.0, but I can't reach 1.5 Gb/s transfer rate. I've updated everything as I could, including the BIOS - that does not show even any option that would for example switching between modes SATA...

  Is there anyone with a SSD R600 and get better results?
  I only failed to update the chipset installation ends with an error and suggests that there is something not quite right

  Hello

  Have you checked the BIOS for the SATA mode option settings?

  Some BIOS supports a SATA mode: AHCI and compatible.
  In case you want to use the SATA performance, you must use the AHCI parameter.

  AFAIK the external eSATA port supports the 300 MB/s and in the BIOS must be set to serial ATA (default) port4.

  The interface of the host load max 300 MB/s but sustained data read would be max 100 MB/s and 40 MB/s max sustained data write

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!

• Portege R600 - display problem device change Utility

  We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

  (1) common modules (version 6.06.01)
  (2) controls Toshiba (version 3.31.3800)
  (3) button ON / OFF (version 2.5.1.0_IS115)
  (4) Toshiba utility (version 4.30.18)
  (5) Toshiba screen device change Utility (version 2.5.0.0)
  (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
  (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

  We now have the following symptoms:

  (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
  (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
  (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

  I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

  This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

  Post edited by: Will-SOE

  We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

• Portege R600 - what someone has installed OS FreeBSD

  Hello

  Someone trying to install freebsd on portege r600? BSD recognizes material etc...?
  All the problems? etc...

  Any experience and responses will be appricieated.

  Thank you.

  Hello

  Unfortunately I m not a R600 owner but in my opinion it shouldn't be a problem with the installation the most common devices should be recognized

  But of course you will not be able to install Toshiba special tools and utilities that are designed specifically for the Windows operating system.

  See you soon

• Portege R600 - 13 X - how to reinstall the operating system on the new HARD drive?

  Hello

  I inherited a Portege R600 - 13 X of my colleague, who hit and killed the hard drive. I installed a new hard drive, but you don't have operating system installation diskettes as he said that the computer has not come with any. To make things even more difficult, I believe that the optical drive may not work. My old R500 had a dead optical drive and after I replaced it (he has not yet worked) I was told it is perhaps something to do with the ribbon cable, which piggy back off the coast of the SD card reader, then to the motherboard.

  Anyway, is it possible for me to install Win 7 Professional (I have the original windows key) from a USB flash drive? Or y at - it a specific OS recovery/reinstallation disk that I can download Toshiba?

  Any advice would be very welcome
  Thank you
  NJ

  I have a Portege R600, and he has been a formidable workaholic, although now showing its age with newer software.

  I think these machines came with pre-installed Vista and your friend must have created a set of recovery discs when they got off the machine.

  Toshiba did release a drive to upgrade when Windows 7 is released which was available to the buyer within the free upgrade period you. You may be able to find a disk, but you will need the Win7 license to go with it.

  If not, your only option is likely to be to buy a disk and license. Of course, you can find the specific Toshiba drivers are missing. If you think about it, it's extremely unlikely that you will be able to locate what is essentially a free Windows 7 download install disc.

  Without an optical drive, you need to use an external USB drive and the BIOS to boot from that first force.

  I hope that you have succeeded.

  Andrew

• Re: Portege R600 - upgrade to hybrid SSD + Win7

  The R600-4201 is _For far_ the best laptop computer I have ever owned or even seen, and I intend to keep it for as long as possible. I just bought a Seagate Momentus XT hybrid hard drive (SSD + magnetic) and Windows 7 Ultimate edition.

  To support installation hardware and the operating system switching from XP to W7, I will have redundant (more local cloud) perfect backups of data files to e-mail, data files, passwords, etc.

  Can anyone here guide me more access to specific Toshiba updates, drivers, BIOS, etc., should be done? Further guidance or advice will be greatly appreciated.

  Thank you!!!

  I think that this portable 2-book with the new operating system and hard drive will challenge anything on the market today. With radio offshore and with the Transflective screen, I get more of * WORK SIX HOURS * at the park or at the beach - there just isn't any better than that.

  Hi dude

  Thanks for the comments on the Portege R600.
  I like this laptop. I wish that I would have enough money to buy this toy, but I have a u400. It of also great computer laptop not too big... the size of the screen is perfect because I travel a lot

  By the way; You can find all the drivers (also for R600) here:
  http://EU.computers.Toshiba-Europe.com/

  Welcome them

• Portege R600 - detected SD cards but cannot navigate or format

  Hello

  I have problem on my Portege R600-10U (Windows 7 Ultimate) with SD card reader. When I put the SD card into the slot it is detected by the system, but I can't the eyebrows he or I can do format.

  I did the installation of RICOH_Media_Driver_v2.07.01.00 on the Toshiba support site, but when I check pilot for SD card reader is show a generic driver by default Microsoft.

  Also I don't know if it's important, but I can see player sd on the list of devices only when I put the card in the card reader.

  I even tried to do a manual installation of the driver by selecting the extracted content of CRAC - 20091103162555.zip (RICOH_Media_Driver_v2.07.01.00 folder), but windows didn't find the INFs appropriate in it.

  Me missing something, is there a prerequisite not before installing the card reader driver or card reader perhaps it self does not work properly.

  Many thanks in advance,
  Igor

  > Card he is okay since I use it in my camera
  This could be the problem

  I think that you can access this SDHC card if you should first format!
  There should be a preinstalled tool called SD memory card format.
  Format the SDHC card first, and then try again.

  PS: The card reader must manage SD up to 2 GB card and SDHC up to 16 GB cards

• Portege R600 and Webcam in Skype functionality

  Hello!

  I tried to get the camera working on the Portege R600 within Skype.

  I got it in the past, but he stopped and now I just get a black screen when I load the video in the settings. I tried specifying the default camera and also the chicony usb 2.0 camera two identical results of both. I updated to the latest version, earlier and removed and he readded in Device Manager. No luck.

  Any ideas? Running fully patched Vista 32 bit

  Hello

  I'm not very well why this happens, but I see that you use the Skype of m.
  Some people have reported some problems with the webcam and 3rd party software like MS messenger and Skype for example. Both applications use the webcam also.

  I think there could be a problem with software compatibility between the software/driver preinstalled webcam and the Skype/MS Messenger

  You said that too that everything has worked in the past, as well, that would be really interesting to know if the problem would be persists using the laptop with the factory settings Toshiba and without a Skype or other additional software installation.

  Good bye

• Portege R600 built-in HARD disk error

  My Portege R600 works very well until today when he came with the built-in "Disk error" message when I turned on it. He then lists the following:

  Intel Boot Agent GE v1.3.24

  PXE - E61: Media test failure, check cable of
  PXE - MOF: exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready...

  I'm leaving on a trip to South America and do not have access to the system disks.

  Can someone help with this problem?

  Hello

  If you get an error of HARD drive and after that the message PXE boot, it seems that your internal HARD drive is not recognized more...

  Have you already checked the BIOS if the HARD drive is it recognized?
  Otherwise I think you need to replace the HARD drive :(

• Portege R600 - 13 X - installing the driver in Windows XP Home edition

  I create a business image of the XP custom for the portege R600 - 13 X and I was wondering if toshiba porovide a CAB file containing all fichiers.inf required for sysprep or if there is a stopped driver installation guide?

  When I re - seal and run installation module of mobile bradband minié ericsson don't re - not install correctly.

  Help, please

  Hello

  Here's the order to install Windows XP Home edition and I hope this will help you

  Windows XP Professional SP3
  Intel Chipset Software Installation Utility
  Intel Matrix Storage Manager
  iMSM Registory 20080303
  Intel Cantiga Vista driver
  Realtek HD Audio Driver
  TOSHIBA common modules
  Effect of Mic TOSHIBA
  ALPS Pointing-device Driver
  OnOff TouchPad utility
  Software TOSHIBA
  Driver Intel internal LAN
  Intel AMT Management Engine Interface
  Intel Wireless LAN driver
  Intel Proset (Shirley Peak)
  Atheros Wireless LAN driver
  Atheros Client Utility
  Bluetooth Stack for Windows by Toshiba
  Logon Key TOSHIBA wireless
  RICOH Media Driver
  TOSHIBA 3G RF Power Control Utility
  Ericsson 3G driver
  TOSHIBA HDD Protection
  TOSHIBA SSD alert
  TOSHIBA SD Memory utilities
  TOSHIBA SD Memory Boot Utility
  TOSHIBA Hotkey Utility for display
  TOSHIBA screen utility unit of change
  TOSHIBA zooming Utility
  TOSHIBA Power Saver
  TOSHIBA Mobile Extension
  TOSHIBA utilities
  Password TOSHIBA utility
  Wireless keyboard shortcut
  TOSHIBA ConfigFree
  PC Diagnostic tool
  TOSHIBA Assist
  TOSHIBA controls
  Sleep USB TOSHIBA and service charges
  TOSHIBA PC Health Monitor
  TOSHIBA cooling tool Performance Diagnostic
  CD/DVD Drive Acoustic Silencer
  Infineon Trusted Platform Module utility
  AuthenTec fingerprint utility
  Chicony Camera Assistant Software
  TOSHIBA security assist

  Good luck.

• Portege R600 and Windows 7

  I installed Windows 7 (custom installation). Subsequently installed the Toshiba Setup program to load all the programs/drivers concerned. I have a problem with the screen, especially in Word 2003. That she will all suddenly, distort so that the words become faded/pointed/double, so that you can not read the display. A second open the document in Word will not be affected. Re-opening and closing the particular document clears the problem. The document is late and is not damaged.

  Also found that sometimes when start up or wake up from hibernation, the machine hangs and looks like the fan is working overtime.
  Nothing happen so unless I have a power to force down and restart.

  Finally, the wheel on my mouse (latest Windows 7 drivers installed) will not work to resize a screen of Word and will not work in the folders pane in Outlook 2003.

  Any thoughts?

  See you soon

  Strange! I installed Office 2003 on two laptops Toshiba with Win7 and everything is OK.
  Have you noticed some other display under your Portege R600 Win7 problems, for example in Internet Explorer or other applications running?

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• Portege R600 - Windows 7 switch backlight does not

  I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
  I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

  Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
  It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

  What can I do?
  Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
  Maybe in the button holder, I put in an option in the empty file?

  > Switch on / off the backlight does not work.
  AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
  Please check if the lighting is not disabled in the BIOS.

  I also searched this forum for some tips and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

  Check it!