Portege R600 - performance SSD limited by SATA 1.0
Hello
I have improved my Portege R600 - 13 X replace SSD HARD drive (Sandisk Ultra Plus / SATA 3.0)
This laptop has the Intel® GS45 Express chipset supporting should SATA 2.0, but I can't reach 1.5 Gb/s transfer rate. I've updated everything as I could, including the BIOS - that does not show even any option that would for example switching between modes SATA...
Is there anyone with a SSD R600 and get better results?
I only failed to update the chipset installation ends with an error and suggests that there is something not quite right
Hello
Have you checked the BIOS for the SATA mode option settings?
Some BIOS supports a SATA mode: AHCI and compatible.
In case you want to use the SATA performance, you must use the AHCI parameter.
AFAIK the external eSATA port supports the 300 MB/s and in the BIOS must be set to serial ATA (default) port4.
The interface of the host load max 300 MB/s but sustained data read would be max 100 MB/s and 40 MB/s max sustained data write
Tags: Toshiba
Similar Questions
-
Portege R600 - issue of SSD upgrade
I have a R600 10 q and I am interested to put an SSD in to replace aging / slow HDD have had a look at what others have said and there seems to be some compatibility issues.
We know if these have been fixed with the new BIOS updates? or is there a list of compatible drives?
Have a been a success with a particular model?Thanks for the help
TimI agree with Akuma.
The use of SSD drive should not be a big problem.
If something does not work, try to update the firmware of SSD drive for the last s.
In most cases, this action has resolved most of the problemsSince the Portege R600 supports a SATA controller, the SSD drive should support the same standard of controller.
Good luck and thanks for sharing your experience after upgrading the SSD drive
-
Portege R600 - SSD Compatiability
Can someone confirm if OCZ, Kingston or SSD Transcend is compatiable with the Portege R600? I want to replace my main HARD with a 64/128 GB SDD drive.
It should not be a problem if you want to use the SSD with the right interface. You need a SATA SSD.
AFAIK the Portégé R600-102 was equipped with 120 GB SSD SATA.
See you soon -
Re: Portege R600 - upgrade to hybrid SSD + Win7
The R600-4201 is _For far_ the best laptop computer I have ever owned or even seen, and I intend to keep it for as long as possible. I just bought a Seagate Momentus XT hybrid hard drive (SSD + magnetic) and Windows 7 Ultimate edition.
To support installation hardware and the operating system switching from XP to W7, I will have redundant (more local cloud) perfect backups of data files to e-mail, data files, passwords, etc.
Can anyone here guide me more access to specific Toshiba updates, drivers, BIOS, etc., should be done? Further guidance or advice will be greatly appreciated.
Thank you!!!
I think that this portable 2-book with the new operating system and hard drive will challenge anything on the market today. With radio offshore and with the Transflective screen, I get more of * WORK SIX HOURS * at the park or at the beach - there just isn't any better than that.
Hi dude
Thanks for the comments on the Portege R600.
I like this laptop. I wish that I would have enough money to buy this toy, but I have a u400. It of also great computer laptop not too big... the size of the screen is perfect because I travel a lotBy the way; You can find all the drivers (also for R600) here:
http://EU.computers.Toshiba-Europe.com/Welcome them
-
Portege R600 - 13 X - installing the driver in Windows XP Home edition
I create a business image of the XP custom for the portege R600 - 13 X and I was wondering if toshiba porovide a CAB file containing all fichiers.inf required for sysprep or if there is a stopped driver installation guide?
When I re - seal and run installation module of mobile bradband minié ericsson don't re - not install correctly.
Help, please
Hello
Here's the order to install Windows XP Home edition and I hope this will help you
Windows XP Professional SP3
Intel Chipset Software Installation Utility
Intel Matrix Storage Manager
iMSM Registory 20080303
Intel Cantiga Vista driver
Realtek HD Audio Driver
TOSHIBA common modules
Effect of Mic TOSHIBA
ALPS Pointing-device Driver
OnOff TouchPad utility
Software TOSHIBA
Driver Intel internal LAN
Intel AMT Management Engine Interface
Intel Wireless LAN driver
Intel Proset (Shirley Peak)
Atheros Wireless LAN driver
Atheros Client Utility
Bluetooth Stack for Windows by Toshiba
Logon Key TOSHIBA wireless
RICOH Media Driver
TOSHIBA 3G RF Power Control Utility
Ericsson 3G driver
TOSHIBA HDD Protection
TOSHIBA SSD alert
TOSHIBA SD Memory utilities
TOSHIBA SD Memory Boot Utility
TOSHIBA Hotkey Utility for display
TOSHIBA screen utility unit of change
TOSHIBA zooming Utility
TOSHIBA Power Saver
TOSHIBA Mobile Extension
TOSHIBA utilities
Password TOSHIBA utility
Wireless keyboard shortcut
TOSHIBA ConfigFree
PC Diagnostic tool
TOSHIBA Assist
TOSHIBA controls
Sleep USB TOSHIBA and service charges
TOSHIBA PC Health Monitor
TOSHIBA cooling tool Performance Diagnostic
CD/DVD Drive Acoustic Silencer
Infineon Trusted Platform Module utility
AuthenTec fingerprint utility
Chicony Camera Assistant Software
TOSHIBA security assistGood luck.
-
Portege R600 - where can I find the order of installation on Vista x 64?
Hello
I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.
Any help would be appreciated.
Regards, Richard.
Hello
There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
-Chip Set Utility
-Display driver
-LAN Driver
-Driver Lan Wireless
-Sound Driver
-Intel Active Management Technology (AMT)
- and so on...Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
The SATA driver is part of the Intel Storage Manager. -
Portege R600 - Dynadock displaylink installation failure
I tried to install drivers 2.3 for a dynadock USB DVI, for use with a Portege R600.
Whenever I tried, the DisplayLink driver installation fails, which means that the connection with the external monitor does not work.
A few error messages appear:
"This file has no program associated with it for performing this action...". "- referring to DisplayLinkCore, something--the window is truncated.
The second message:
'Impossible to install DisplayLink Core'
The Portege is under XP SP3.
I saw a post [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=145077𣚵] which seemed relevant, but I can't at this point.
I would appreciate any pointers on this.
Great news. Thanks for this feedback!
-
Application of Portege R600-10 t display driver update
Hello
I'm looking for the latest display driver for my Portege R600-10 t (to see if she would be 1440x900@75 the value).
Went to the corresponding page on the uk.computers.toshiba - Europe.com, and it showed the following:30/06/09 | Display driver | Intel | Windows Vista 32 bit | 15.9.9.1527 | World Wide
When I checked the complete info, he showed the following:
FTP - URL _display - 20081117151809.zip_
Date of last change * 30/06/09 *.
Intel Corporation
Type display driver
Subtype (none)
Size (KB) 19568
Version * 15.9.9.1527 *.
Universal language
Countries world wide
Description this driver improves the functionality of display device and allows you to perform different settings, such as color management, monitor properties or control of overlay. You can also get help if you have related troubleshooting display issues.
Portege R600, Portege A600 model
Windows Vista 32 bit operating systemWhen I download the file, it is called _display - 20081117151809.zip_
When I install it, it's the version * 7.15.10.1527 * whose date of * 07/11/2008 *.I'm sure I chose the right OS, and I tried several different ways to get the downloadable file, including letting my automatic detection system. Same result.
I don't know if I am missing something... ? Where is the 15.9.9.1527 of the display driver version?
Thank you
Post edited by: kiden
PS - I was already on v7.15.10.1527
Hello
Average was last modified time when this package has been uploaded to the database server. Therefore, there is another date.
By the way: the last pilot, you will find on the page of Intel.
I have a laptop with Intel GPU and I use the driver from the Intel page.By the way: the resolution of the screen depends on the graphics chip and internal screen.
If the display does not support preferred resolution for you, then you will not be able to select this -
No Audio or USB ports with Port Replicator 3 and Portege R600
I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.
I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.
A few things to try:
Reinstall the Toshiba Value Added Package.
Use system restore to restore Windows to a previous state.
Check the connector for docking station for damage.
Back up your data and perform the recovery.If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.
-
Portege R600-101 - new hard drive internal
Hello, is it possible to change the internal hard drive of the R600 (for a 500 GB or bigger)?
Andreas
What's your Portege comes with SSD or HARD disk?
-
Portege R600 - difference between the cooling options
I have a Portege R600 with Windows 7 installed, but I guess my request is generic for all Porteges regardless of the version of Windows.
Could someone please explain to me what really mean "options of cooling" in the power settings? I could not find the details of anywhere.
Optimized battery means that the cpu fan is activated only beyond a certain temperature? And what is the difference between cooling and maximum performance?
Is there another way to set the speed of the cpu fan directly?
It is a very important point for me, because the fan of the Portege is terrible, too noisy, insofar as I plan to return the laptop unless I find a solution. Sometimes, this looks like a Ferrari to RPM 1 billion engine!
Thank you!
Hello
I think the explanation is quite simple: optimized cooling battery means that the fan is activated only on a temperature higher than the maximum performance mode and that s all I think.
For example, if I put the battery optimized cooling notebook is a little hotter than the maximum performance mode, but if I can save energy. ;)
In addition it s advisable to clean the laptop from time to time using a jet of compressed air!
-
Need of details and info on Portege R600 - 13 c PPR61E-03G004CE
I bought a new Portege R600 - 13 c (PPR61E-03G004CE). There is no information on this model to the Spanish site of toshiba (www.toshiba.es).
Anyone know where I can find information about this model?
Hello
I googled and found this:
Chipset: Mobile Intel GS45 Express Chipset
CPU: Intel Core 2 Duo SU9400 processor
Graphics card: Mobile Intel® GMA 4500MHD
RAM; 3 GB
LCD: 12.1 "
HARD DRIVE: 320 GB (7200 RPM) SATA
PC CARD: 1 x EXPRESSCARD
BLUETOOTH, WlanWelcome them
-
Portege R600 - Windows 7 switch backlight does not
I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.What can I do?
Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
Maybe in the button holder, I put in an option in the empty file?> Switch on / off the backlight does not work.
AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
Please check if the lighting is not disabled in the BIOS.I also searched this forum for some tips and found this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192Check it!
-
Portege R600-13Z - Toshiba utility SMS - slow / stop when the SIM is in!
Hello
Portege R600-13Z running XP Pro.
Recently updated the firmware and the Wireless Manager to try to get 3g / GPRS comms to work at all. Updated worked a treat and have now great comms.
Utility of SMS does not work too well if. Very, very slow or crashes.
Wierdness: out the SIM card to use the phone to send a few texts and with the SIM on SMS utility works very well (!) starts, allows composition, everything except the real /sending/ of the text, which is of course not possible because the SIM card is somewhere else.
Anyone encountered this problem, and is there a solution?
Thank you very much
Evan
null
> took out the SIM card to use the phone to send a few texts and with the card SIM SMS utility works great
If you noticed delays in using DMD utility only with the inserted SIM card?Hmm I m not very well why this happens, but I know it s not recommended to insert the SIM card if the system is already running.
You must shut down the laptop, must insert the SIM card and then you should power the device in place.
Then you could test this once more. -
Portege R600: SIM inserted but error: "device not found".
Hello
Portege R600 under XP.
Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".Cannot find the configuration options or anything like that in the manual.
Can someone point me in the direction of literature?Thank you very much!
Evan
Hello
Here you can download the latest version of 3G driver and tool:
http://APS2.toshiba-tro.de/WLAN/?page=3gdownloadsHere you will find a knowledge base on the topic of G 3:
http://APS2.toshiba-tro.de/WLAN/?page=3ghowtoand here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htmHope this helps
Maybe you are looking for
-
Windows 10 - audio device is not installed
Hi, I have upgraded to Windows 10, but now my laptop says I have no audio devices installed. It worked yesterday on Windows 7. Can someone help me? Thank you
-
Hello I have a problem using InetSendMail (server of SMTP, From_Email, To_Email, subject, Message, attachment) function. If I use directly a string in position of To_Email '
-
problem with the Windows Vista print spooler service, hp
Ive just bought a printer hp deskjet 2050 all in one series printer j510, instillation goes very well until you connect the usb to the pc printer, then the next bit says sorry cannot locate the driver, so I try to download the driver from the Web sit
-
I am trying to burn CDs and DVDs and my computer tells me that I don't have a dvd player. The light comes on when I put a disc, but no answer and my computer does not show with the rest of my hard drives. How can I get that back?
-
I tried several times now to be able to find the shortcut icons on the desktop, I had before my last batch of automatic updates. I also tried since to add new... but it's like there's an invisible on shield! Looks like they are copying as they would