Portege R830-10U, Windows 8, updated, Toshiba Upgrade Assistant question about PA

Similar Questions

• Toshiba Upgrade Assistant fail on Satellite L755

  Hello everyone

  I want to upgrade to Windows 8 Windows 7 install Toshiba Upgrade Assistant and I get an error always the same, that is: "error reading INI file target."

  So I can't continue with this level of testing Upgrade Wizard, I've seen on this forum that some friends have the same problem, Toshiba will solve?
  I look forward to your responses to this error, and please, I am a beginner and do not know what the target INI file.

  Thanks and greetings

  Hello

  What Satellite L755 exactly do you have and where you downloaded the Toshiba win 8 Upgrade Assistant?

• Portege R830 - error 3.9 update BIOS

  Hi all

  Portege R830 - 138 current BIOS 3.7

  I can't update the BIOS to 3.8 or the latest version of 3.9. Error: This computer is not supported.

  VAP is installed and modules work. A previous post on the forum suggested that it could be linked to the Intel firmware update recent Management Interface which I had asked and I am unable to uninstall or rollback.

  Any suggestions?

  THKS!

  Hello

  One of my friends has updated the BIOS from 3.7 to 3.9 without major problems.
  It might be possible that you cannot update the BIOS because of missing or disabled TVALZ services.

  Go to control panel of control-> the Administrative Tools icon, and then click services.

  Here, you can check if the TVALZ service is available, if it is available, turn it on and then try to update the BIOS.

  If this does not work, you will need to retrieve the laptop using recovery disk or recovery disk that the BIOS update should functions using factory reset Toshiba

• Update to OSX.  Questions about Parallels

  I'm about to upgrade to OSX El Capitan of 10.6.8.  (I know it's time)

  My question (s)?

  1.) Will the 9 of Parallels Desktop for Mac (v. 9.0.2451) running on OSX?

  I use Parallels to run Windows 8.1, which I use to run Quicken Home and Business 2015 R 11 (24.1.11.1).

  So I guess that if Parallels 9 is compatible, then windows and Quicken will be as well?

  2.) I am also under Office 2008 for Mac - which I suppose will not work after the upgrade?  Does anyone have any experience with Office for Mac OSX.

  Thanks for any idea or information, on what you can spend.

  Nope, both (maybe) need of updates. Corresponds at least to version 10, but instead of 11. Office 2008 might still work, but the reports vary; 2011 version works very well for me.

• Toshiba Cameilio H10 - Question about recording format

  Conversion of camcorder high definition help please!

  --------------------------------------------------------------------------------

  I recently bought a Toshiba Camileo H10 what movies in HD 1080 x 720 camcorder. I did several video clips in this format.

  Now, when I'm going to try my suite video Ulead Moviemaker 6 messing around with videos to burn to a disc, it won t work as they are registered as .avi files.

  So I tried to use the Arcsoft Mediaconverter that came with the camcorder to change them in MPEG4 or similar and may not work with the Ulead software. It helped and made the right format, but on the contrary reduced definition 640 x 480.

  Windows encoder doesn't work either.

  How can I change the clips to the correct format without losing the definition?

  Or, what will work the video suites in .avi format?

  Any help greatly welcomed!

  Thanks for the enthusiastic response for help.

• ODI12c Upgrade Assistant question - schema getting not listed

  Hello Experts,

  I am trying to upgrade ODI11g (11.1.1.7) at ODI12c (12.1.2.0.0) to help upgrade on windows 64-bit Wizard

  Oracle DB 12 c (12.1)
  ODI12c

  JDK-7u51-windows - x 64
  Grouped patch successfully applied (Patches: 16926420, 17170540, 17469061)

  I followed steps below: -.

  1 ODI12c with Enterprise Edition Installation
  2 Create Master and scheme of work such as DEV12_MR1 and DEV12_WR1 respectively on Oracle 12 c DB (using Create User)

  3. master of export and scheme of work with Oracle 11 g DB command exp

  4 Import Master and scheme of work in the 12 c using imp Oracle schema

  IMP SYS / * fromuser = DEV11_MR1 touser = DEV12_MR1 file = D:\exp_DEV11_MR1.dmp log = D:\imp_DEV11_MR1.log
  5. check the master: DEV12_MR1 is connected to the repository of work DEV12_WR1

  6. start the upgrade wizard
  When I get to STEP 5 of the upgrade wizard - diagram of ODI.
  I have given credentials of DBA and try to connect. It connects successfully. However, under the user name of schema , I am unable to see "DEV12_MR1". Therefore not able to go further.

  Let me know if any stage are missed.
  Guide and help kindly.

  
  aim links below: -.
  http://docs.Oracle.com/middleware/1212/ODI/ODIUG/Tasklist.htm#ODIUG117
  http://docs.Oracle.com/middleware/1212/core/UAREF/using_ua.htm

  Kind regards
  Andy

  Hi Andy,.

  If the UA cannot see your master repository, you probably do not have an entry in the SYSTEM table. SCHEMA_VERSION_REGISTRY$ (accessible via the synonym SCHEMA_VERSION_REGISTRY).

  I copy your DB 11 g SCHEMA_VERSION_REGISTRY line in the 12 c one.

  It will be useful.

  Kind regards

  JeromeFr

• I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  How your question about Windows Update?

  The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

  Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.

• Portege R830: changing wallpaper

  I want to have a background screen or different wallpaper of the Toshiba one.
  I cannot put through windows. I use a Portege R830 and Windows 7.

  MIA.

  The Office can be customized.

  Make a right click on desktop-> customize

  Now, you can check all the available themes, which also contains background pictures.

  Save the changes.

• Portege R830 - forcing mobile broadband using 3 G/HSDPA with Win 8

  Hi all

  Updated my Portege R830 to Windows 8 without problem.

  Given that most of the Wireless Manager functionality has been moved in the Windows, I can not find where I can "force" the connection to 3 G/HSDPA.

  I live in an area where the signal is insufficient and if I let the network default settings, it frequently goes to the strongest EDGE connection. I connected with Wireless Manager, using only 3 G/HSDPA where 2 bars were sufficient for everyday tasks.

  Moments of light bulb? (Travel is unfortunately not an option... ;))

  Hmm, I think that this parameter isn't available in 8 Win.

  Microsoft provides a nice article on configuring broadband to help to win 8 and mentioned configuration isn't it:
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  From my understanding the best signal to broadband will be selected and used if it is available.,.

• M300 stuck at startup after execution of Toshiba Upgrade Asst

  Hello

  I just bought a copy of Windows 7. I ran the Windows 7 Upgrade Advisor, and he recommended me to visit the Toshiba page, where I found the link to download Toshiba Upgrade Wizard to prepare my M300 Satellite upgrade to Windows 7. I managed to download all the software needed. Everything worked fine until the part where the Assistant is to install some components and restarted my laptop. Has been through the usual procedure to initialize the operating system and there was this screen "Please wait...". "just before the login screen, and the screen seems just run forever. I tried to keep running for more than a few hours, but the Vista screen was still there, under the wording "Please wait".

  I tried to boot in safe mode and managed to enter the office. I was able to run complete the Toshiba Upgrade Assistant of safe mode, although I noticed that there were not any components that were required for the installation. Ethernet controller was strangely absent. Unfortunately I can't install Windows 7 in safe mode.

  Is there one solution other than to cut it down for the after-sales service?

  As much as I know Portege M300 is not covered by this program to upgrade to Win7.
  Am I right about that?

• Windows Vista 32-bit to Windows 7 64 bit upgrade

  Dear all,

  I appreciate that an update of a 32 bit OS to 64-bit is not possible, and so I have to run a clean install. However, I can buy a CD to upgrade and which allows to do the clean install, or I have to buy a "new version" somehow.

  My processor is an Intel Core 2 Duo (T7500) which, as far as I am aware, is 64-bit capable. (I have Ubuntu 64 bit on it, so I can also assume so).

  In addition, if a "custom installation" (clean) is made, it essentially will install Windows 7 as another partition or delete the vista one or the other way around. Seems a strange question, which I enjoyed, but for the moment, I currently 17.7 GB free and according to Windows 7 requires 20. I could easily get rid of a load of content, but I am interested in how the process works.

  Thank you, Ian Clark

  Windows Update has nothing to with the upgrade of Windows, Ian. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Portege R830-10 q - Win 10 upgrade - error 0xc000000f

  I have a Toshiba Portege R830-10 q I'm trying to put Windows 7 upgraded to Windows 10.

  When upgrading, he stumbles and goes into a loop of repair to 29% which gives me error 0xc000000f with no way to roll back.

  A clean installation, installs absolutely perfect, but due to rules of activation of Microsoft (possible only via an update unless you buy the product), it is no good.

  Has anyone managed to upgrade the q R830-10 Windows 10 yet?

  I know that's not on the list of approved of the PC Toshiba, but surely there must be a way

  I also have this problem, anyone can give us advice how to fix this
  Thank you.

  Jonathan

• Portege R830 - use of fingerprinting as part of Windows 8

  I have big problems with two drivers Toshiba on my Portege R830 computer in Win 8 Pro 64 bit upgrade.

  I did a clean update on a reformatted hard drive, then went to install display drivers and that totally crashed my machine out.

  When I put in my IDs of the machine would do a reboot of the force.
  Finally, I am in safe mode (with SHIFT-restart the login screen) and was able to fix it and remove the driver.

  Then I installed the utility of fingerprinting, this week still downloaded from Toshiba for my machine.
  He even marked as "new".
  That actually worked, in a way, but it caused my login icons user on-screen connection prior to appear as duplicates.

  Took me forever to understand it is the utility of fingerprinting and when I removed the user icons are returned to normal.

  So now the fingerprint reader is useless for me.
  In the hope of a solution soon.

  > So now the fingerprint reader is useless for me.
  > In the hope of a solution soon

  Have a look here:
  * Windows 8 Upgrade - Notes and Restrictions *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

  Software reader Toshiba fingerprint + _ + _

  _Issue description: _
  Toshiba Fingerprint Software is not supported under Windows 8. Fingerprint records will be lost during the upgrade process.

  * Note: *.
  + Remember your Windows password. You will need to enter after the upgrade. If you have a fingerprint reader, fingerprint records will be lost during the upgrade process, which is connected to the Windows 8 will not be via a fingerprint authentication more. +

• Question about upgrading Windows 10 in Satellite Z830-10U

  I see that the Satellite Z930 is supported for windows 10 Toshiba upgrades list, but no sign of Z830. I have a Z830-10U and trying to decide whetehr to resume the free update to windows 10 before it runs out in July 2016. Someone has done it successfully?

  Posted by rg2by
  

  I see that the Satellite Z930 is supported for windows 10 Toshiba upgrades list, but no sign of Z830. I have a Z830-10U and trying to decide whetehr to resume the free update to windows 10 before it runs out in July 2016. Someone has done it successfully?

  Although no rating by Toshiba, I just successfully upgraded my Z830 win 10 and everything seems to work. When win 10 was originally released my first attempt failed (blue screen and his motor boat) so I had to reinstall Win 8.

  Before this second successful attempt, I checked with Toshiba to make sure the motherboard is compatible, downloaded "Driver of Talent" and drivers up-to-date and changed the power settings continuously to ensure no stops during installation...

  All of it worked and now I WIN 10 work on my Z830. At this point I'm not sure works of Bluetooth which stopped when I upgraded from Win 7 to 8 Win.