Portege Z10T-A203 - a pixel is always white on my screen FHD

Similar Questions

• Portege Z10T and Win7 - can't get the auto rotation screen

  Hello

  I installed windows 7 to a Portege z10t and can not get the screen auto rotation time reversed the portrait and landscape, I had a quick glance in the chart properties intel and cannot find anywhere them for this set up ideas and Googled it.

  Any ideas?

  Thank you

  Hello

  Are you sure that you have installed all the tools essential to Toshiba and utilities like Win 7 drivers for this series Portege Z10T?

  Driver Toshiba UE page provides the essential as software * easy Control.* Tablet
  This utility is required for the function of automatic rotation of the tablet.

  I recommend you to check if all the software available on the page of the Toshiba UE driver has been installed and working properly on your laptop

• Just upgraded to 42.0 Firefox and background color setting doesn't work anymore - an empty window is always white.

  I just upgraded to Firefox 42.0 and, unlike previous versions, the setting of background color in 'Content' no longer works. In the settings page, the indicator 'Background colour' changes the color I choose (not white) in the choice of color theme, but each time I open an empty window background color is always white. Then, when I return to the Setup page to verify that the indicator still shows the color that I chose. And I have check the box 'Use the system color' or not there are tick, the result remains the same: the background color of an empty window is always white.

  It is a problem I've never met before. I would like to know why.

  Thanks for any help.

  You can make only one rule:

  @-moz-document url(about:blank), url(about:newtab){ html,body {background-color: #ccc !important } }

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Toshiba Digitizer Pen does not work on Portege Z10T-A

  I have a Portege Z10T.-a.

  I bought new Toshiba Digitizer Pen PA5133U-1EUC.

  The link below, this pen is compatiable on my laptop. But it does not work. Y at - it no adjustment or the driver of this pen?

  http://www.Toshiba.com/us/accessorie...s/PA5133U-1EUC

  I think you should check if the device supports the digitizer and if so, you will need to calibrate the pen and touch settings.

  For this I recommend that you review the Microsoft FAQ on pen and touch settings:
  http://Windows.Microsoft.com/en-pH/w...Sked-questions

• Change the SSD or RAM in Portege Z10t?

  Hello

  As we know that it is very easy to change the RAM memory or the Portégé R700-930 series SSD drive.
  It's a little more complicated for the Z series.

  I just wanted to know if this is possible for the new series of Z10t?
  The standard elements of 4G and 128G are a bit small for my taste.

  Thank you
  / Anders

  Hello

  I think the upgrade on Portege Z10T is another story and not comparable with other series such as Portege R700.

  The Portege Z10T is a mixture of Tablet / netbook device and mSATA SSD drive is placed within the tablet that is not upgraded to the user.

  If 128GB are not enough for you, you can insert and use the extra memory media into the SD card slot

• Portege Z10T-a - keyboard does not

  Hello

  The keyboard of my Toshiba Z10 unresponsive.
  Tablet mode is fine.

  I have try the reset, restart, I installed the patch, nothing, battery recharges through the keyboard.
  Thank you for the support.

  Hello

  Hmm... usually the update of the firmware (patch) should help resolve this problem.
  I would give another thread on the same topic, and the update of the firmware was the key.
  http://forums.computers.Toshiba-euro...ThreadId=73148

  I also found that this doc from Toshiba in the knowledge base on the update of Firmware for Keybord Docker for Portege Z10t solve connection problems
  http://APS2.toshiba-tro.de/KB0/TSB3A03IV0000R01.htm

  But it seems that you have already installed the patch, but it didn't he not help you.
  So I think that there is a problem with the connection of the keyboard.

  You should get in touch with service Toshiba authorized in your country in order to verify the keyboard.

• Portege Z10t - A PT132A goes to sleep after 60 seconds of noninteraction

  Portege Z10t-A PT132A-00F00T

  My Tablet continues to go to sleep after about 60 seconds of noninteraction.
  I can watch youtube, read, listen to music... etc and after about 60 seconds of me not to touch the display turns on outside and all the audio and video stop.
  As soon as I touch the screen it wakes up again.

  I was in the power options and retouched for the power supply and battery.
  I put Sun/Eve forever to the two options as a test, but still it does.

  I missed a place where it is defined elsewhere?
  Very annoying

  Thank you

  Post edited by: Jayp

  Hello

  Is it in laptop mode when Toshiba keyboard Dock is fixed or in tablet mode only?
  Is it if the adapter is connected or only when the adapter is removed?

  The computer will automatically mode 'sleep' according to the sin of setting power options. To access this click
  Office-> Office help-> Control Panel-> system and security-> power options options
  (or Win key + X-> power options)

  Here you should find the option called display auto power OFF
  This feature automatically cuts off the power to the screen when there is no input of keyboard for a while

  You can also see the hybrid sleep feature that appears also in Power Options.

  In addition, I recommend check you the settings of Intel Display Power Saving technology.
  This feature is enabled by default and controls the current consumption b< optimizing="" the="" picture="" contrast="" and="" internal="" lcd.="" this="" can="" be="" used="" if="" notebook="" is="" running="" in="" battery="" mode="" and="" using="" the="" internal="" lcd="" display="">

  To access this feature, he must right click on the desktop, and then click graphics properties
  -> Select battery from the drop-down list in the power source, and then click Power.
  Then, clear the checkbox display energy saving technology and lick OK.

• Portege Z10T-A140: can I make to Win 8.1 and where to find the serial key

  Hello
  I have Z10T-A140.

  When I check the part number in the link: http://www.toshibamea.com/en/Compatibility-Matrix-8-1?SerialNo=pt131v-00h005ar

  told me is not compatible with win 8.1.

  but to under writing the page, it is compatible with win 8.1.

  Why the result is different?

  Another question:
  I can't have my serial number of Windows 8 and I can only see last 5 digit number.
  If my clear HARD drive and I need full new install winodws 8, where can I find my serial number for Windows 8.1?

  Thank you.

  > Why the result is different?

  Your laptop is a PT131V-00H005AR Portege Z10T-A140
  Of course, it s 8.1 Windows extensible and taken in charge.
  On the page of supported Windows update 8.1 models, you can find the Portege Z10T PT131V.

  > Other my question:
  > I can't get my serial number of Windows 8 and I can only see last 5 digit number.
  > If my clear HARD drive and I need full new install windows 8, where can I find my serial number for Windows 8.1?

  I recommend reading the user manual. You will find information on the Toshiba Recovery Media Creator.
  The recovery media Creator allows you to create a recovery disk. This disc install again the image of Toshiba on the laptop. The serial key is not necessary because the Windows 8 will be activated automatically using Toshiba image.

• Portege Z10t connect to projector using VGA

  Hello.

  I'm having a problem connecting the Portege Z10t to a projector via VGA.
  The amount of the fine by HDMI.

  Resolution changes to screen for something like a 4:3 ratio.
  Then, he goes on the projector, rest for about 10 seconds then bombs.
  I tried several resolutions but no joy. We are running windows 8.1

  I tried a few different z10t and different projectors. Other laptops running windows 8.1 are very well, it seems that with the z10t.

  Any ideas? Thanks in advance

  First of all, it would be interesting to know what resolution you ve chosen for internal and external display.
  The Portege Z10T series was equipped with different views, but as far as I know the max resolution supported for all the screens should be: 1920 x 1080 px

  If you use the extended desktop, two screens (internal + projector) could use different resolution, but if you use the clone poster option then the resolution must be the same on the Internet as well as on the external display (projector).

• Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees

  original title: Chess Titans little Caprice

  Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees.

  Hi Woody15380,
  
  Chess Titans walk and check if that helps
  .
  Use this link to turn off the game and then turn on again.
   
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Also delete all the files in C:\Users\user name\AppData\Local\Microsoft Games\Chess Titans
   
  Aziz Nadeem - Microsoft Support

• His flashes always (white, black) in illustrator &gt; on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

  no longer works because

  His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

  I start the program and then it will begin to Flash white and black.

  On my machine of Tablet and desktop

  I use win10 on both

  need illustrator very soon

  It works again!

  I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

  I hope this helps! (:

• White, now computer screen died

  Hello!

  I hope someone here can help me shed some light on my problem!

  I bought an Acer Aspire V/582PG 15.6 "HD touch about a month ago. Today, I was playing games with a couple of friends when suddenly the screen went white. I could still hear the music from the game and could talk to my friends on mumble. I tried to put the computer to sleep and then turn, but the screen is still White gloss. I tried to stop it and start over; the screen is always white.

  I then plugged on my TV using hdmi. This allowed me to see the Windows login screen. Shortly after that I logged in Windows, the computer turns off. Now I can't start and none of the lights on the computer are on.

  Does anyone have an idea what could have happened? Do you think that this is covered by the warranty? Never had a problem like this before...

  Best regards

  Bjorn Forsberg

  This seems to be a hardware problem.

  If you have a unit of the United States or the Canada, you can also live chat with a technician Acer: Acer-live chat

  If you bought the computer in another country, you can contact support here Acer:Acer Global Support

• T232HL using with laptop: key always assigned to laptop screen

  Hi all

  I have attached the T232HL Acer to a Vaio laptop, running Windows 7 64 bit. The latest version of the driver is installed. The touch works very well when the laptop monitor is mirrored or the screen of the laptop is turned off.

  But when I have the extension of the screen, so that the laptop and T232HL show different areas, the action of contact is always assigned to the screen of the laptop.

  In Control Panel, I made the T232HL the main monitor and I tried different positions, for example putting the T232HL on the left side of the laptop in the display settings. Nothing helps. The mouse settings, stylus and touchscreen Windows aren't any help either.

  How can I assign action to touch the Acer monitor?

  Thanks for your help,

  Tyron

  Tyron,
  I am sorry you did not set up your multiple tactile display configuration. I did some research on the issue and have found several topics on the issue. I found a "fix" of Microsoft if you have not tried, I would recommend download and installation; http://support.microsoft.com/kb/2618640. After trying to run the calibration tool as I suggested in my previous post.

  I also read, from a source of third party on the web, in Windows 7 touch input is limited to the main screen. According to Microsoft, Windows 7 native touch does not simultaneously support multiple touchscreens. To use multiple screens with touch input, you can use another touch APIs, such as the MultiTouch CornerStone C++ (or Flash/AS3), or touching information streaming protocols, such as TUIO or XML.

  If the "fix" does not solve the problem and you have the driver for Windows 7 of our support site, then it can be as above or a limitation of the driver that this monitor is compatible Windows 8 touch.

• Is it possible to make files always open size full screen in Vista?

  Getting files to always open full screen

  Is it possible to make files always open size full screen in Vista?  It's a setting that is easy to do under XP, but he continues to annoy me in Vista, as some setting I try, it always opens with persistence in a small window of default size, and I have to click to maximize.

  I use Vista Ultimate with a score of 5.9 Windows experience.  I have the Radeon HD 4870 x 2 graphics card and a monitor ViewSonic 21 inches, both with drivers signed to date.

  Space ALT X - problem solved