Portege Z30-B-12F - 3 G / 4G SIM not recognized
Hello
I just acquired a Z30-B-12F, updated with Windows 10 and I have installed the sim card from my smartphone, but Windows does not recognize and told me that there is no sim card.
Moreover, I want to ask if people have managed to reverse the scrolling of the touchpad.
Thank you
This can happen due to the closure of hybrid of windows. Try to use restart instead of shutdown and market manual. If this does not work, try to close your laptop and go directly into the bios. Perform a restart. It should detect your card after some tests.
Tags: Toshiba
Similar Questions
-
X 250 SIM not recognized (new)
I recently acquired a X 250 Thinkpad for work. That the work takes me outside the Wifi areas, I also acquired a SIM card to use with the EM7345 integrated. However, even if that worked originally (I inserted the card, he acknowledged, I changed the PIN code), the laptop no longer recognizes the sim card when it is inserted.
The solution suggested in another thread (enable WWAN in BIOS) does not apply to me, as it is activated.
My SIM card works in other devices, however, the different SIM cards are also not recognized. Any ideas?
I switched to Windows 7 preinstalled for Windows 10, change of PIN was already in Windows 10, so I doubt that it had nothing to do with it.
Man, I feel stupid now. There are three different places to turn off WWAN in Windows 10. And of course, you will need to check each of them... So long story short - I can connect now, but the update of the firmware, however, does not offer an update. In addition, he has apparently E-plus, not o2.
-
Connected to the Portege 3500 USB DVD burner is not recognized correctly
I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?
Hello
Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.
-
Slot missing SIM on Portege Z30 - A - 10 p
Hello
I bought the Portege Z30 - A - 10 p and there is no SIM card slot on the right like the pictures on your web site. Model wich we have exactly please? Z30-A-12 q is there?
If so I'll ask for a change where I took it because he has this model too.
Thank you
According to the specifications of the laptop this model of laptop is not 3G and SIM card cannot be used with it.
Please contact your dealer and ask if you can get another model with built in 3G module. -
Portege Z30 Module problem - A - 13 L 3 G
I had a problem with a new Portege Z30 - A - 13 L.
Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).
I also put the right apn in the profile.
I had this problem with 2 different operators sim cards.Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.
After that I reinstalled again the image Windows 8.1 with the original recovery disks.
I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.Then I uninstalled and installed the driver manually again.
He appears again as com device in Device Manager.So I think that the module has been a hardware failure. What do you think?
> After that I reinstalled again the image Windows 8.1 with the original recovery disks.
> I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
Install it!Also 3G must be activated before you try to establish a 3 G connection.
Please check if the 3G module has been activated correctly!Recommend checking this information page of Microsoft Mobile Broadband end-to-end
http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finishYou will find different troubleshooting tips.
In the case where you have a signal but you can't connect the possible reasons could be:
You don t have a valid data subscription.
The name of the access point (APN), user name or password used for the connection is not valid.
You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services. -
Portege z30-b-14z 10 Pro 64 bit will not be in hibernation
Dear all,
My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.
I can not hibernate through the following methods:
1. click on 'Start', 'power', 'Hibernate '.
2. press x and windows, click on 'Close or disconnect', click on 'standby '.
3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.
Well want to can someone help?
See you soon,.
Bender22Dear all,
There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.
I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.
Can anyone help, because Toshiba cannot.
See you soon,.
Bender22 -
Portege Z30 PT311E - X 11 crash on Linux Debian Jessie
I have a Portege Z30 PT311E-01P03GIT
The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
The Xorg server dies, killing all programs and user processes and start the KDM login prompt.It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.
Other than that, all the features and video modes work.
Any help to solve this problem?Thank you
Below, the initialization of the kernel dmesg messages
Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0Hello
You can try to disable the frame buffer by adding the following for initialization arguments in GRUB
fb = false
Here is a non-Toshiba, not Debian related article describes some useful steps:
http://KB.Digium.com/articles/FAQ/HO...using-problems
I hope this helps.
Tom BR
-
Portege Z30 - I am unable to send SMS
I have a Portege Z30-A-13F. On the previous Portege, Ericcson device shipped, I used the Toshiba Wireless Manager and the SMS from Toshiba utility in access card for messages (SMS).
Currently, with the integrated chip of Sierra, I am able to access the network, but there is no interface for SMS on the AirCardWatcher tool.
The Wireless Manager does not work (I think it only works with Ericsson devices).
Is it possible to use the SMS with this computer?Thank you very much
AFAIK this is regardless if the laptop supports the Ericson or the Sierra 3 G module.
The Toshiba Wireless Manager should work fine in two modules.
Check this document... He explains how to set up and establish a 3G connection via the Manager preinstalled Toshiba wireless.
http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm -
Portege Z30 - A - unable to connect to the GSM mobile network.
Toshiba Portege Z30 - A Windows 7 Prof
When I try to connect to a modem GSM receives the error:
"Network connection based on a mobile broadband connection failed with the error code: 1.(GSM card works properly in other devices)
Hello
According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.Recommend you to check the configuration.
-
Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption
I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.Could someone help me find the answet to this question and, if it supports encryption.
How to activate it?
THNSNJ256GMCU
Main features
• Capacities up to 512 GB
• Available in four Standard form factors
• MLC NAND Flash memory
• Low-power Devsleep feature support
• The end-to-End data protection
• Gravitational quadruple Code technology (reverse)More features
• Translation mode which allows all disk configurations
• Hot plug/OS-Aware removal
Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
• Read only mode supported for emergency -
From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:
* The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
* The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
* The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restoreMy question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.
Please be so kind and send feedback after your recovery image experience.
-
Portege Z30-C-12Z cam does not work with Win 10
Hello!
I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.According to me, I tried and everything, checked it please help!
Try this:
Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.
Reinstall the camera application can also help.
-
Toshiba Portege Z30 - A - Accupoint does not work
Hey there!
I had a problem with the Accupoint, he moved alone, so I disabled it.
But the problem is that I have also disabled the two buttons above the key.A is it possible to repair the Acupoint or disable without disabling the buttons?
I have a Toshiba Portege Z30 - A with Windows 10
Thank you!
AccuPoint or Trackpoint
I think it's a touchpad cable problem. Send in for repair.
-
Portege Z30 poster ipv4 and ipv6 - only pxe boot is
Hi all
Toshiba Portege Z30
We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.
F12 gives the following options:
HDD/SSD: SAMSUNG SSD SERIES
LAN1: IPv6
LAN2: IPv4When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):
------------------------------------------------------------------------
> On IPv4 PXE boot.
IP address of the station is *. ***. ***. ***
IP address of the server is *. ***. ***. ***
NBP filename is SMSBoot\x86\wdsnbp.com
The NBP file size is 30832 bytes
Download the NBP...Succeed to download the NBP file.
Download the NBP...
Succeed to download the NBP file.
Press a key to continue...
------------------------------------------------------------------------I tried searching through the BIOS settings but can't find nothing obvious
Can any advise if there is anything I can try to get this laptop to perform a PXE boot please
Let me know if you need additional information
Kind regards
SteveLooks like your server isn't aware UEFI.
Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first. -
Portege Z30 - smart card reader does not work
Hi, I just got my new Portege Z30 a few days ago.
I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
When I insert the card as stated in the users manual, nothing happens.
I have to player of SC "actuvate" somehow?(DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)
Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?
Make sure that you use a compatible card and it is inserted correctly.
Maybe you are looking for
-
can I set mutiple home pages using fire Fox using the icons separate desk top?
is it possible to set up several firefox desktop icons each with its own homepage with their own records to down load? If not, is it possible to set up so that I can switch between search engines, each having its own folder to load down? I'm kind of
-
the entire address bar has disappeared. help sos asap
no address/url of the box at all!
-
Satellite A300-276 - webcam does not - locked by another application
Hi guys,. My name is Mirella and I want to know one thing.My webcam works well, but my computer was not.Then my mother sent him to her friend (he is a computer technology). I don't know what he was doing, but my computer came back with the same thing
-
Drivers Windows 8.1 compatibility remains a mystery
I tried using the compatibility of HP Wizard, and it would not load. I still need to determine if my drivers must be updated. I have a HP Envy 700-074/product no.. H5Q09AA #ABA. How do I do that without the Compatibility Wizard?
-
Want &; HP DV6-6152nr ent nbk upgraded HD 650 GB at 5400 RPM to the largest SS HD
HI I have a HP DV6 - 6152nr Entertainment Notebook with an HD 650 GB at 5400 RPM. I would appreciate information on how to UPGRADE to a faster disk of the SS. You want to know if no size limit of the unit for the bios to work, if I can upgrade the