Portege Z830-10F - Wi - Fi adapter is very low

Similar Questions

• Portege Z830-10F - WLAN stops working when USB3.0 port is in use

  Hello

  On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.

  The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.

  This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.

  Port USB 3 itself works very well.

  Running windows 8 pro:
  * Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
  * USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)

  I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.

  The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.

  This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.

  Does anyone else have this problem?

  Is there a way to fix this?

  Thank you!

  Hello

  To be honest, it's the first time I read on this issue.
  I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.

  I assume its hardware fault and cela must be verified by a certified maker Toshiba.

• Portege Z830-10F no display - power light flashes

  Hello

  I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
  What it means?

  (PC was left alone in the night on table)
  I try to disconnect the battery and load without it, it did not help.

  Indicator DC IN (first on the left):
  Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

  ((Deuxieme power light to the left):
  Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

  Also try this.
  Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
  Now connect the battery and AC adapter and turn on the device.

• Calibration Portege Z830-10F and battery

  I have a problem with the Portege Z830-10F battey.

  With no alert, closing down and when to start the load at the level start at 51%.

  In an hour, the charge is complete.

  There is a method to calibrate the battery?

  Best regards.
  Nicola

  > There is a method to calibrate the battery?

  The battery can be calibrated to unload the battery until it is completely empty and then until the battery indicator would turn to green (in some cases blue). This indicates that the battery has been recharged.
  This procedure should be repeated several times in the line.

  But be careful: even if you would calibrate the battery, it might be possible that the battery would not provide the same performance due to the age of the battery.

  Sooner or later each battery began to lose the performance load and in such a case, it s just a matter of time, when the battery needs to be replaced.

• Need a part for my Portege Z830-10F spare

  Anyone know the ID, ore where I can get the part near the screen?

  I can't find it anywhere, and I've lost it, removes a go´s live :(

  https://www.dropbox.com/s/q2aj21xzwpcvl25/IMG20141011105220_1.jpg?DL=0

  It s a Z830-10F

  Not quite sure what you are looking for but the photo shows the left screen hinge.
  In any case, all parts could be ordered directly in local Toshiba authorized maintainer.
  Get in touch with the guys and ask such part compatible.

• What RAM Portege Z830-10F supports?

  How much memory RAM can I put in my Z830?

  Can I install a module of 8 GB in my ultrabook?
  Really can only go to 6 b?

  According to the specifications of the laptop upgrade maximum is 6 GB. You can remove a 2 GB module and replace it with 4 GB. Compatible 4 GB of RAM has PA3918U-1M4G part number.

  In my opinion, 6 GB is enough for this machine. Optimize the preinstalled operating system and I think that the system will work perfectly.

• Portege z830-10F - H5321GW Ericsson plug only if restart the wwansrv service

  Hello

  I need to check my new Toshiba with Ericsson H5321GW suitable. But I need to restart the connection wan or restart the wwansrv service to connect to the 3G connection.

  I updated the driver with the last, but the problem is not resolved.

  Can someone help me?

  Thank you.
  Manolo

  Can you please provide more information on your laptop?
  What model of laptop do you have?
  What operating system do you use?
  Are you using the original OS that you got with your laptop?

• Portege Z830 - replacement motherboard

  Dear all,

  My Z830-10f (an Italian model - http://www.toshiba.it/discontinued-products/portege-z830-10f/) core i5 power over more and gives a code of 72 h (pay-per-view voltage is not more than 0.68V when the computer starts up).

  After a bit of Googling, I realized that the motherboard has a serious problem and must be replaced.

  On ebay I found a chance mb of the United States, but it is another model Z830 Intel Core i7 - 2677M @1. 80 GHz. Sthtiquement, motherboards look identical, so I wonder if they may be compatible.

  I know I should find the exact replacement part, but it's really a jungle and probably all the differences are related to the different codes used throughout the world.

  Any suggestion is really appreciated!
  Thank you very much in advance!

  Marco

  Hello

  From my point of few new motherboard of another Z830 would be compatible.
  The motherboard has exactly the same dimensions, but only supports another CPU.

  I guess that the BIOS would be already available on this new motherboard and the other new i7 CPU supports the internal GPU (Intel HD Graphics 3000).
  So you should not get any problem with the graphics card, but also the other parts like the RAM or HARD drive...

  I think you should get a blow and go with this mobo.

• Battery discharge even if Portege Z830 is off

  I have a Toshiba Portege Z830-10F.

  I have a question and a question about the consumption of the battery while the PC is turned off.

  Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level decreased significantly (10-15%).

  I even had the case where, after a period of 3 to 4 days, long weekend during which the aircraft had not been in service AT ALL, I could not reboot the computer, because the battery has decreased.

  I had to plug in and then start it.

  This seems rather odd and strange and would so whether there is a specific setting had to be changed so that it does not happen.

  I upgraded to the latest version of the Bios (v 1.40) and that doesn't change.

  I look forward to your help and your support.

  Stephan

  > Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level has declined significantly (10-15%).

  This can result from certain options enabled in the BIOS.
  For example option Wake up LAN or keyboard or power of dough at low level to use even if the laptop is turned off. Disabling this option might help with this problem.

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• Portege Z830 - shortage of battery after installation of Win8

  Hi all
  recently I have install windows on my laptop and put 8 to update drivers using the assistant, but I noticed that the battery life has decreased about 7 hours for about 3.5 hours. All the drivers do not work properly and I am using eco mode all the time but I still get a very bad battery life.

  Any ideas?

  This difference in very big s battery operation.
  Are you sure that you will get 7 hours battery still works if you return to Win7 64 bit?

  I did other tests: on my machine Win8 I ve installed Win7 64 bit and there is not much difference in the battery operation. I put t really know what can be the problem.

  I hope some other owner Portege Z830 can say something more about it.

• Portege Z830 - 8 GB RAM upgrade possible?

  Hello

  I bought a z830-10f (i5)

  What people tried to install a dimm so-on 8 gig you Z830?

  Some people have tried successfully.

  I tried with a 8gig-dimm corsair, system to detect it, but the next time, it was not detected.

  With the original samsung 2 gig that work very well.

  Maybe the so-dimm is defective?

  Thank you

  Hello

  I think that only 6 GB are possible because 2 GB of RAM are on board.
  And only the second slot would be extensible using a 4 GB RAM module.

• How to control the fan on Portege Z830?

  I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
  I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.

  So my question is how can I set the fan to work my way?

  There are not many options to control the fan.

  The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.

  As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
  This should help a little...

  In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
  It worked.

• Portege Z830 - 11J - several questions after Win8 Pro upgrade

  Hello

  I bought a Portege Z830-11J with Windows 7 Pro.
  I bought the Windows 8 Pro Upgrade and did a very basic * clean installation *.

  I installed the Windows 8 Pro from scratch a (empty) disk.
  I checked for missing drivers Device Manager.

  I did a download for * Windows 8 * drivers with my serial number.
  I extracted only the drivers for the device and didn t installed all the additional software.

  I installed the drivers from package 3grdv-20120119182104 H5321gw
  I installed the drivers of the fingerprint of the fp - so package - 20121025114331
  I installed the drivers from package bltstk-20121015121744 bluetooth stack

  all drivers and windows 8 are 64-bit.

  The installation of windows has no update and the power management settings are by default.

  After 30 minutes, the ultrabook goes into deep sleep, led power mode fading slowly. all right.

  Sometimes the ultrabook wake up, if I press the power button and all is well.

  * BUT not to every time the ultrabook will wake up! **

  If she woke up, the Black Guard screen won´t, there is no video on the VGA port.
  The keyboard lights up if press and that s all the.

  If I Don t to power down (press power button very long), the hot get extrem ultrabook to the position of the cpu.

  Can someone help me with this problem?

  BIOS is 1.70

  Help...

  Hello

  I agree with Akuma, some Windows 7 drivers are compatible but many drivers Win 7 problems to Win 8.

  In addition, you should try to turn off the laptop, press Windows key + X and then choose stop.

  The point is that Win 8 be hybrid mode if you n t press Win + X key so that closing.

  Here's a tip:
  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help