Portege Z930 and clean to Windows 8 install

Similar Questions

• Problem domain Portege Z930-13 x - error Windows 8 - network

  Hello

  I am owner of a Portege Z930-13 x with windows 8 is installed.
  My work is connected to a domain network and work very well until today.

  When I started the PC and I put my password it says: "the security on the server database has not a computer account for this trust relationship.

  On windows 7 and XP I could easily enter the admin user and correct this problem by re-connected to the domain of may server.

  In this case, I can't enter the administrator or user mode because it gives me the error of the soul.
  I can't restart the computer with a cd/dvd-rom or a usb pen with hirens boot or other kinfd of the software that I use.

  How can I fix?

  Thank you

  In my opinion that's not Toshiba related question and the answer should be offered by Microsoft.
  Perhaps someone can offer a solution. Until then check it please if someone can help on http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  I hope someone can help. If you will be able to find solution to be nice and post small report on this issue.

• -12H - Portege Z930 can't activate Windows 7

  Laptop comes with Windows 7 Pro 64 bit.
  Reason for the client software problems I decided to install Win 7 Pro 32 bit version.

  Everything is ok, but I can't use this Win 7 key to activate Windows.

  Activation procedure initially said that the Windows 7 Professional product key you typed is invalid for activation and after--the following information was found for this error: 0xc004e003. The Licensing Service reported that license evaluation failed.

  I tried this process several times (I did a typo in, etc.).
  But the message is the same. Windows 7 and the key are official.

  I tried to change the laptop time (in some cases time is in the future, the activation is impossible).
  So where can be problem? Can I change the BIOS settings?

  Hello

  Please wait a moment
  You have installed your own right of Microsoft Windows 7 system?
  In this case, you have purchased a license from Microsoft and that you got a new serial key.

  This key must be valid to activate Windows 7.

  Here you will find the simple steps how to activate Windows 7 via internet or phone:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

• User name and password for Windows 7, install new.

  I just installed Windows 7 on my computer and it asks me a username and password.  How can I find out what my username and password are I never put in place and never had a single installation on Vista either?

  You can try a number of things, please see the following articles:

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Or:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Credit: Ronnie Vernon MVP

  If you have an installation of Windows 7 disk, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

  -----------------------

  If the problem persists, start in system recovery environment in Windows 7, simply start your PC. Just before that the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

  When loading the system recovery environment, click command prompt:

  We will try to create a new user account.

  Example: net user username password / add

  Where there are replacing username with the name of the account and replace password with the password.

  Example: net use adacosta2 pwhelp / add

  Press Enter on your keyboard

  You should see the following message, the command completed successfully.

  Type exit to close the command prompt.

  Restart the machine and try logging into the new account.

• Are adapters CA / CC for Portege Z930 and Kira-701 compatible?

  Hello friends,

  My boss has a Toshiba Z-930 ultra-livre and power adapters about 10 - 12 for him around the world in his various homes and offices.

  He now plans on changing his computer. The same power adapters will work on the laptop Toshiba KIRA-701 or not? I tried to look to the top of the internet, but could not find any confirmation.

  If the 701 Kira is not compatible with the old charger so must be changed every 10-12 power adapters.

  Can someone help me with this information? The power adapters are not compatible so I might as well consider other brands, so I would have to change anyway all the power adapters.

  Thank you in advance.

  Umair

  Sorry, but I must ask you this question: do you want to buy new notebook without adaptors CA / CC and the use of old adapters CA / CC with the new machines?
  Sorry, but it makes no sense to me.
  Even if you want to exchange machine you, what you want to do with Z930 machines without adaptors CA / CC? It does not seem logical to me.

  In any case, I found the info that both models have adapters sector with the same output voltage: output current V. 19: 2.37 A so I think that both machines use the same adapter.

  I hope someone who own that Kira 701 can confirm this.

• Portege Z930 Windows 8.1 Overview - 3G no longer works

  Hello

  After you have installed the Preview of Windos 8.1, the 3G Modem is no longer in effect.
  Anyone have the same problem and know a solution?

  I did update the Firmeware (long before 8.1)
  I tried to download the latest version of the driver, but does not work!

  It will be found, but is not operational.

  Portege Z930-PT234E
  8.1 Windows 64-bit

  Kind regards
  Armin

  Hi Armin

  The RTM of Windows 8.1 version is in the month of August, so I think that Toshiba can offer some new drivers will fix all the problems. Until the official launch, I don t think that you will find whatever on Toshiba support and download page. I fear he must wait a little in the hope that Toshiba will offer necessary updates of m.

  Let's see if someone has more information on this subject.

• Portege Z930 - FN keys issue - showing no no menu on screen

  Hello

  I have toshiba portege Z930 and my function keys worked until I installed YAC (yet another cleanser) to get rid of some malware, which worked, but the problem is that even after uninstalation, function keys is broken:

  FN + y/z which should highlith the keyboard does not work (I have installed what is called the "function key" for now, that works as well with the FN 1, 3 FN, FN 4 and 3 + 4 to volume)

  but others simply does not work:
  FN + ESC (mute)
  FN + F2 (eco mode)
  FN + F5 (control switch)
  FN + F8 (wifi/bluetooth switch
  FN + F9 - 12

  Could someone point me to good drivers for this? Thank you very much
  Karolina

  What Windows system is installed?
  In the case of Windows 7, you need to install Toshiba Value added Package
  In the case of 8.1 to win, you need to install the Toshiba system parameters.

  But be careful: some FN key features depends on the 3rd software. For example, you will not be able to use the FN + F2 if eco mode ECO Utility isn't installed.

  But why n t give you the OS at the beginning point of time until you have used the cleaning tool?

• Portege Z930 - BSOD kernel data by page fault

  Recently (3 days ago) my girlfriend bought Portege Z930, and she becomes BSOD kernel data in error page, randomly (battery or AC).

  Hardware config is: Core i3 Mobile i3-3217U, DDR3 4 GB, HD Graphics 4000, SSD 128 GB
  Software: it didn't install new programs, using the trial version of office, Google chrome and windows 7 64 bit which was pre-installed. Anyone have any idea, what could be the cause of bsod? Preinstalled software from Toshiba? Hardware malfunction?

  Also because off-topic information autonomy point is up to 5 hours (wifi on, light off, bright screen keyboard: 40%)

  On this virtual path, it is not easy to say what may be the problem. In my opinion, you should make data backup and install the OS by using HARD drive recovery option.

  After that do what you will have new own preinstalled OS. Test a few days without having to install anything just to see if the error appears again.

  Installation of HARD drive recovery operation, you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

• Portege Z930 - SDS Partitions

  I just got a Portege Z930 and explores various things until I'm heading on installation of software, etc.

  I noticed that 128 GB SDD related just 100 GB of space which seemed rather restrictive.

  So I checked and found that the drive has four partitions.

  1.46 GB labeled recovery Partition
  100 GB of the main boot partition
  4 GB labeled Hibernation Partition
  13.5 simply labeled GB main partition

  Given the limited space on the disk, I wonder if the 13 GB partition made something useful and if it could be deleted and added to the main partition to gain a few extra GB space...

  Anyone know what that the 13.5 GB partition for?

  Thanks in advance.

  Andrew

  Akuma is right. This partition is recorded recovery image that can be installed if something goes wrong with preinstalled operating system. Don t play with her and with the structure of partition before you have created a recovery media.

  Please read the document of the user s manual and create recovery media USB that you can use for installing the OS. After that, you can even format this 13 GB and use it to back up data.

• Back to Vista after Non - Genuine Windows 7 installed

  I bought a computer compaq laptop and I have Windows Vista installed in it. a few days back colasped, I took the laptop to a guy, he has installed a pirated version of Windows 7.

  Now I want to go back to my windows vista I guess it was home edition. I did not make any recovery of widows earlier disc, but I have the product key for activation windows with me.

  Kindly tell me how to recover my Vista Home back on my laptop.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Cleaning of Windows Update tool does not

  I'm having a problem running windows disk cleanup tool. My SSD with windows on it is currently very full)<50 mb="" of="" space)="" so="" i="" am="" trying="" to="" clean="" up="" all="" of="" the="" old="" windows="" update="" files="" using="" the="" tool.="" when="" selecting="" the="" windows="" update="" cleanup="" on="" the="" files="" to="" delete="" list,="" it="" says="" i="" can="" free="" up="" 5.34="" gb="" of="" space.="" however,="" when="" i="" go="" to="" delete="" the="" files,="" the="" cleanup="" wizard="" runs="" briefly="" and="" then="" closes="" with="" no="" notification="" of="" completing="" or="" prompting="" to="" reboot.="" i="" tried="" restarting="" myself="" but="" it="" did="" nothing.="" not="" sure="" why="" it="" wont="" work,="" but="" i="" am="" not="" sure="" any="" other="" ways="" to="" free="" up="">

  Please check what you do against this note.

  A new feature has been added to cleaning disc in October 2013, which is not available in cCleaner. You must change the existing settings to take advantage of the new feature. Type Disk Cleanup in the search above the Start button box and press ENTER. Click OK and after the calculation of space, you will see a window with a list of files to delete. Use the right-hand scroll bar to see the entries hidden further down the list. Check the boxes in front of the backup of the Service Pack files and cleaning of Windows Update and click OK you will see savings every time after Windows has been updated, but they are not as important when it is run after the first time. You must restart the computer to complete the process.

• Portege Z930 - new Windows 7 and installing the driver

  I have a Toshiba Portege Z930 Ultrabook.

  I don't use it for a while because he was very very slow when navigating or attempt to perform other tasks. I scanned the system with several antivirus (now I have Avast and Fixila, but I also used Kaspersky and Norton) and nothing came.

  Now, I decided to reinstall Windows.
  So, I received a kit of Windows 7 Pro (it's the license granted with the laptop) and I'm fighting for a week to make it work properly.

  Now seems as graphics card does not work, I have most of the hard disk full some old files of windows, etc, etc.

  1. How is the right way to install a new version of windows on this laptop (without the old installation files) and use the accessories available on the laptop (graphics card, fingerprints... tool)

  And YES, I tried all THE drivers available on the Toshiba support successfully section only for the wireless card.

  2. have you had problems with the speed?

  Thank you
  Victor

  Hello

  > Now looks like graphics card does not.

  Does that mean exactly? Graphics card is recognized correctly in the Device Manager?
  In case it is, the driver is installed and works of the GPU.

  What Portege Z930-xxx are you?
  The exact part number might be useful to check the specs of the laptop.

  By the way: the driver / software installation is not very difficult.
  Forget the other Toshiba software if you n t want to install it
  Pick up the pilots only...

  However, some parts of the software as a value-added Package must be installed because this package installs a range of important public services.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

  This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

  Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot, try to install the programs and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  I suggest to try the methods mentioned in the following article and check the status of the issue.

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)