Possible bug in Cisco ACS 5.1 importing devices?

Similar Questions

• Does Cisco ACS 1113 v4.2 device work with Windows 2008

  Hello

  I have a wireless currently in production infrastructure. All my Cisco LWAP is managed by Cisco WLC. Authentication is done via RADIUS through my device Cisco ACS 1113 running on version 4.2. The Cisco ACS 1113 device communicates with my Windows 2003 Active Directory. Everything is good now.

  Next month, we plan to update Active Directory from Windows 2003 to Windows 2008? Will be all fine and good, or will it be questions? Please advice kindly.

  I saw another post in this community that the States https://supportforums.cisco.com/thread/1003597?tstart=0. I am now confused. Help, please.

  Kind regards

  RAM

  + 60122918870

  ACS 4.2 does not work with Windows 2008R2.  I had a case of TAC open about this, and basically, they told me that I had to switch to 5.2 ACS.   I've been doing demonstrations there and it authenticates with Windows2008R2 very well.

• Cisco ACS 4.2: The most important to back up files?

  Dear Sir

  Can you tell me what are the most important files to back up in the Cisco ACS directory?

  Currently, I am only backup (with Symantec Backup Exec):

  C:\Program Files\CiscoSecure ACS v4.2\CSAuth\System backups

  * But, I would like to know if my server crash, can I restore the entire configuration with the files listed in the directory below? (Users, groups, groups of devices, AD, mapping, users, groups,...)

  * The Cisco ACS there change in the Windows registry?

  * Is it necessary to reinstall the Cisco ACS, if I need to put in an emergency on a new server? I guess Yes, because the installation creates services, etc.

  I ask this question because it takes time to install the patches...

  * Or, can I save all the Cisco ACS directory... On a new server, install the Cisco ACS and restore the backup?

  Thank you very much for giving me your experience about it.

  Kind regards

  You should back up the files that come from ACS backups, i.e.

  System configuration > backup GBA, the location that is specified in this section.

  And the default location is the one that already save for example "C:\Program Files\CiscoSecure ACS v4.2\CSAuth\System backups"

  In case you are required to host ACS on a new server, you would be required to re - install the complete application of the CSA and then simply take the last backup and restore in the newly installed ACS. It will be to restore everything users, group etc. to etc. of the external database mappings.

  When you install ACS on a new server, then make sure that if you run them Services ACS with a service account (this is required for the authentication of the window according to your requirement), you would be required to run new services with this account too, and which may require that go you through the following documentation.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  Kind regards

  Prem

  Please rate if this can help!

• Cisco ACS, multiple CA, assignment of VLAN relevant to the domain

  Hi all

  I searched for a solution to a specific customer requirement.

  I want authenticate users with certificates from different RootCA wireless and assign them to one VLAN based on their field?  Ideally, using the same SSID and a Cisco ACS server.

  Is this possible?  Has anyone seen that it works?

  I realize that the ACS can have trust company for the relevant RootCA (dunno what version is needed for this?).  And that assignment VLAN is also possible to a unique SSID based on RADIUS attributes.  But I am not sure that these parts would fit together?

  Would appreciate some advice!

  Thanks in advance

  Rob

  Hello

  Yes, this is possible. I suggest that you implement one by one to make sure that everything works, but no problem to do so. All recent versions of ACS allow this.

  You can do mapping group from ad groups (a group for each area, so if you want to) and assign the vlan based on the mapping of this group.

  GBA can trust several certification authorities and authenticate users with certificates of all these cases. It's just a matter of import these number certificate in the trust list.

  And you can assign the vlan and use only one ssid as well.

  I can't guide you on the procedure that it depends on which version you have and if you have IOS ap or WLC, but it is basically each function separated as in the config Guide and just used all together.

  Nicolas

  ===

  Remember responses of the rate that you find useful

• How can I use Cisco ACS to save Shell commands

  Hi guys, pleeeease how can I configure Cisco ACS to do command authorization on my Cisco 3660 router. I get the accounting logs and authentication but no newspaper that show orders issued by users - shell and it's the most important paper that I need. I read materails and download articles on the site of Cisco... but the thing is still does not give me the papers.

  I have these lines on my router:

  ...

  AAA authorization config-commands

  AAA authorization exec default group Ganymede +.

  AAA authorization commands 15 default authenticated if

  AAA authorization network default group Ganymede +.

  ...

  It's funny, when I turn on debugging of the authorization of the AAA on the router, it shows me every command being sent by the user on the debug log. But nothing shows under Administration TACAC + on the Cisco Secure ACS. What is responsible for this?

  *****************************************************

  I installed the trial version of the Cisco ACS 90 days and made all necessary settings and I have to say I like what I see already. I'm opening moves to recommend the product to purchase. Thank you guys, I got about the features of this ACS software through this forum, keep up the good work. I recommend the software for those who need to have adapted to the management reports Security Audit logs.

  If I understand what you're asking correctly, the answer is not in the authorization, that it is in accounting. I set up on my routers and send to ACS orders that level 15 privilege users enter on the router.

  orders accounting AAA 15 by default start-stop Ganymede group.

• Cisco ACS 5.8 CLI admin account lockout

  Hi all

  We recently deployed device Cisco ACS 3495 and running on a version 5.8.

  Everything seems well while our for the CLI admin account was locked out.

  Found a bug in Cisco for the same problem with version 5.5, but no solution yet...

  ACS 5.5 CLI Admin account locked and no Log Message
  CSCur37203
  Someone out there who might have encountered the same issue and can help advise?
  Thank you and best regards,
  NDA

  Hello

  Unfortunately, the only solution for this is the DVD of password recovery.

  Once fixed, you can increase the car locked out amounted to something greater than the default value of Cisco.

• Cisco ACS SE GANYMEDE + accounting fails

  Hello

  I'm under Cisco ACS SE 4.1.23.5. My problem is that the ACS don't Jrnl of the remote switches. I have configured the following accounting commands:

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  When I enable aaa accounting debugging, I get the following logs on the switch.

  001091: 12 sep 12:06:06.464 TSB: AAA/ACCT: user johndoe, acct type 3 (2684940942): method = Ganymede + (Ganymede +)

  001092: 12 sep 12:06:06.665 TSB: TAC +: (2684940942): received the status of response acct = SUCCESS

  001093: 12 sep 12:06:11.128 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  'show running-config '."

  001094: 12 sep 12:06:11.128 TSB: AAA/ACCT/CMD: find the "default" list

  001095: 12 sep 12:06:11.346 TSB: AAA/ACCT: user johndoe, acct type 3 (1583033889): method = Ganymede + (Ganymede +)

  001096: 12 sep 12:06:12.000 TSB: TAC +: (1583033889): received the status of response acct = SUCCESS

  001097: 12 sep 12:08:16.303 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  ' configure terminal '."

  001098: 12 sep 12:08:16.303 TSB: AAA/ACCT/CMD: find the "default" list

  001099: 12 sep 12:08:16.303 TSB: AAA/ACCT: user johndoe, acct type 3 (1098049616): method = Ganymede + (Ganymede +)

  001100: 12 sep 12:08:16.504 TSB: TAC +: (1098049616): received the status of response acct = SUCCESS

  001101: 12 sep 12:08:29.884 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  It seems that the switch is well a response but the CSA record. I have updated the ACS for the latest patch (4.1.23.5), which is supposed to resolve this known bug.

  Is there something that I am missing?

  Thank you.

  ESD

  And what you get in the newspapers of Ganymede Administration?

  Kind regards

  Prem

• Cisco ACS 4.2 1113 Recovery DVD

  Nice day!

  We have CSACSE-1113-k9 Cisco ACS 4.2 device 1113. And we need to reimage (restore the device to its original state). Can enyone help me with the correct link software.cisco.com image recovery DVDs?

  I'm trying to find it, but I can't see recovery dvd:

  Home downloads Products Clouds and systems management Security and identity management Cisco Secure Access control server products Cisco Secure Access Control Server Solution engine Cisco Secure Access Control Server Solution engine 4.2

  Hello

  As far as I know, you don't have the possibility to download cisco.com ACS recovery DVDs. You can contact Cisco TAC and they can publish the software for you.

  Note If useful...

  Kind regards

  Kush

• Cisco ACS 4.1 - user profile changes

  There is no option in Cisco ACS 4.1 Solution where we can specify the option that "user must change password on the next logon" as it used to be in Cisco ACS 3.X ".

  Is it possible same functionality can be enabled on Cisco ACS 4.1

  Concerning

  Sohail Sarwar

  Hello

  That option does not exist in ACS 4.x.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs

  Hello

  I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.

  Kind regards

  RAM

  + 6 012-2918870

  Hello

  It is not possible.

  You cannot push the ACL in the NAC manager.

  If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.

  Using the Radius attributes you can then map users to roles.

  Please, take a look at this:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_auth.html#wp1158789.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Cisco ACS 5.4 repositories

  Hello world!

  I would like to know the possibility of FAC functions. As you can see on newspapers, I have 2 deposits:

  (1) local db (I maen on cisco acs)

  (2) ftp server

  I would like to copy from local database to the ftp server, and then delete all local db. If it is possible how can I do?

  Incremental backup restore

  Backups available to restore

  Backups available to restore the Date Type of repository name

  acsviewdbfull_xxx-acs-xxx-1_20121205_143351 05/12/2012 LogBackUp Full

  acsviewdbfull_xxx-acs-xxx-1_20121231_020000 31/12/2012 LogBackUp Full

  acsviewdbfull_xxx-acs-xxx-1_20140128_100837 28/01/2014, full xxx-acs-xxx-1-2-backup

  You can copy a file to local repository to a remote ftp server using the command copy.

  ACS54 / admin # copy disk: / / "> ftp: / / .

  Prompt for user name and password will follow.

  Then delete the files on local repository respectively using the command delete.

  ACS54 / admin # remove disk: / /.

• [Cisco ACS 5.2] EAP - TLS authentication failure

  What we are e

  Hello

  I set up a WiFi connection on Windows XP and Windows 7 with EAP - TLS (using Cisco WLC 7.0.235.3 and Cisco ACS 5.2.0.26.10). It is configured with the authentication of the computer and computer certificates are automatically registered for Microsoft PKI.

  It works well!

  Now, I configured Windows 8 with the same configuration.

  First authentication works, but if I manually disconnect and reconnect, I got this error on ACS: 22047 username main attribute is missing from the client certificate

  In the EAP packets, we could see that Windows 8 sent a TLS session but ticket session has not properly taken over by ACS...

  Configuration of the ACS, we checked the option "enable EAP - TLS Session resume' with the session timeout"7200 ".

  I found this bug

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCtn26538& from = summary

  It seems to be my problem but the reboot does not work in my case...

  It is set at 5.3 (0.40.2).

  I plan to install version 5.4.

  Do you know if this fix is supported by 5.4?

  Thanks for your help,

  Patrick

  Hi Patrick,

  What is set in point 5.3 must be set in point 5.4.

  Even if the same issue appeared with 5.4 there an ID different bug and identified as an independent issue (with different causes, usually)

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• The upgrade to Cisco ACS SE and Remote Agent

  Hello

  Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

  I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

  Cisco ACS SE - version 4.1 Build 23 5 Patch 1

  Cisco ACS Remote Agent version 4.2 (0.124)

  The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

  My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

  Thanks in advance!

  Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

  Unfortunately ACS 4.x does not support windows 2008 r2.

  5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

  Concerning

  Bellefroid

  Note the useful messages

• connection via Cisco ACS 5.0 limit

  Hi all

  My infrastrucer wireless a few days ago I deploy Cisco ACS 5.0 with Active directory integration. My wireless users are connecting through web authentication process. The authentication process is gone through AD & his works very well. But I want to work on my 5.0 ACS that a user cannot simultaneously connect several devices at a time.

  Hello Sabine,.

  'max sessions' featre introduced acs 5.3.

  Maximum user sessions

  For optimal performance, you can limit the number of concurrent users to access the network resources. ACS 5.3 imposes limits on the number of simultaneous sessions of service by the user.

  The limits are defined in several different ways. You can set limits to the user level or at the level of the group. Depending on the configurations of the user's maximum session, the session number is applied to the user.

  IMPORTANT: for maximum sessions work for access of the user, the administrator must configure RADIUS account management.

  You can go through the link listed for more information below:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/access_policies.html#wp1176806

  The code that you're using now ACS 5.0 is not recommended for a production environment. You need to upgrade the ACS to achieve the functionality of session max.

  Jatin kone
  -Does the rate of useful messages-

• Access to Motorola RF controller via Cisco ACS

  Hi all

  I want to be able to use authentication on our Motorola RF using Cisco ACS 5.2 controllers remotely. We have the responsible ASB and you can choose different user roles outside of "Super User".

  The reason is that the ID attribute for the role of 'Super user' is 32768 and but ID attribute within the ACS can take only 3 digits (see fig. 1 gasket)

  Anyone had any experience of this or know how to edit this field for more than 3 digits?

  Any help will be much appreciated.

  Thank you

  John

  I can see the issue you are referring to and does not seem to be a bug - dig when it exist and if is not open

  An entire book would not use an enumeration attribute Type but rather an unsigned integer

  Then you must enter the value directly in the authorization profile rather than selecting from a list