Possible HP Pav p6-2007nl Desktop PC - USB 3.0?

Similar Questions

• HP Pav p6-2007nl desktop PC: why its port DVI says "do not remove"?

  Hello, my name is Alex from Holland and I have another novice question, but I hope this helps someone else in novice like me!

  I have the computer mentioned in the title and I want to use a DVI monitor only.

  According to the specification on the Internet (URL below), my computer supports the DVI and VGA; "DVI and VGA ports (using the VGA and DVI ports at the same time is supported).

  But when I go to tbe rear of the computer, then I think DVI port is covered by a plastic cap and says "DON'T DELETE." and it seems the screws used are not a regular screw, but the special screws that has a Pentagon shape.

  Does that mean I'm supposed to indeed not to open, and needing an extraordinary live HP or something? What happens if I managed to open it? I can indeed use the DVI? Or is the ability to DVI made unavailable/Cup?

  I would much appreciate it if someone could teach me this seemingly basic things about the hardware in the computer.

  [SPECIFICATION URL]

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03227446&lang=en&cc=us&taskI...

  Thank you very much,

  Yours,

  Alex

  Based on your photo, the discreet graphics card has HDMI and DVI - I outputs. You can use HDMI monitors and DVI in native mode and you can use a VGA to DVI-connection screen using an adapter DVI / VGA (dongle).

  Please click the White Star of KUDOS to show your appreciation

• Is it possible to connect Deskjet 3050 wireless and USB a?

  I want to connect via a USB port to a desktop computer and a laptop wireless at the same time. I have this possible? If I connect via a USB port it desconnects the wireless. Is there a way to set it so that it does not happen? Using XP SP3 on the desktop and Windows 7 on a laptop.

  Hello

  I connect my printer in this way, BUT only use one at a time.

  Well, I ran a test in this response and the printer can only know one connection at a time.

  Kind regards.

• Microsoft Desktop 2000 USB receiver will not be detected in Windows 8?

  Split of: https://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/microsoft-desktop-2000-usb-receiver-wont-be/1b6e623d-e466-4c81-9d0c-da29eb58604c

  I have a new Microsoft Wireless 2000 keyboard and plugged the USB into my computer Windows 8 and nothing happens.  No noise, no detection, nothing.  The recommendation is to check the batteries in the keyboard and get drivers, but that shouldn't matter for the dongle.  He should at least ding and try to discover what he as it does for everything else that I plug.   I downloaded the drivers and the batteries are all new.  Everything else works in the USB ports, so I think that the new dongle is just bad.

  I also had a mouse Microsoft Wireless Mobile 4000 and the dongle does not even fit into my USB port.  I can connect any other USB device very well, but I couldn't get this dongle in once and since then I can't do without possibly breaking something back in.  I have tried other devices and it's 50-50 whether it fits or not.   It works actually when I get it, in contrast to the keyboard, but once it's in it can not be removed apparently.

  I'm not sure that I hope more than Microsoft hardware.  I may have to stick to software only.  I never had so much trouble with other brands of trust.

  Hello Bphurley,

  Welcome to Microsoft Community forum.

  You can try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  If you can't find the proper drivers rom the manufacturer website please provide us with brand and model your computer and we will try to find the drivers available on the web.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Failed to create desktop PC USB Drive Utility

  I am trying to create a desktop PC USB Utility for my RT computer drive in MAX.  I receive the message shown in the attachment.  I formatted my USB and I have no files inside.  Any solution?

  Understand the problem (had two other USB thumb drives in the computer).  I don't know why have more than one USB would be a problem because MAX asks what thumb drive to be formatted.  However, problem solved.

• Is it possible to copy my files to a USB stick and use it as a backup?

  * Original title: computer problem

  Hi guys, first of all excuse my English because it is not my natural language. My problem is this: I think that my office is stressful on me. It's freezing and sometimes it does not start. I'm trying to back up my files, but I'm not. Is it possible to copy my files to a USB stick and use it as a backup? If so should what files I back up? Is it possible to do a reinstall? I have a Dell OptiPlex 745 with windows vista ultimate. Any help would be welcome.

  Kind regards

  Leslie

  Hello

  How to make a backup of files:

  Go to the file/s you want to put (Documents, music, Photos, etc. in Windows Explorer) > right click on it/them > hover over send it to the mouse cursor > select external hard drive or Memory Stick that you plugged them to save.

  And it's method of Dell to backup your data and reinstall of the operating system:

  Restore your Computer´s software to factory for Windows Vista settings

  http://www.Dell.com/support/article/au/en/aubsd1/SLN117599?c=au&l=en&s=BSD&CS=aubsdt1

  See you soon.

• is it possible to download windows 7 on a USB stick and install it on a computer wiped

  is it possible to download windows 7 on a USB stick and install it on a computer wiped

  Yes, but you must do what is necessary. ISO that you create on a USB bootable copy.

  Prepare the. ISO installation file.

  See the instructions for burning. ISO in Windows 7 or later files:

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

  You can also use the Microsoft USB/DVD tool, which is recommended for users of Windows XP.

  After getting the file .iso that you use it Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  For UEFI systems based

  If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Begin the installation.

  The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:

  http://Windows.Microsoft.com/en-NZ/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• Is it possible to convert Sidewinder Force Feedback wheel USB device?

  Original title: sidewinder force steering wheel feedback

  I have a fairly old sidewinder force wheel sterring feedback, which is a plug connection, not usb.  Is it possible to convert / and if you also think that it will work?

  Hello
   
  I doubt if this would be converted to USB connection since it's an old device that is compatible with XP only. For the best experience in games, I personally suggest you to upgrade the perimeter game, for example, Microsoft SideWinder Mouse.
  For more information on this product, please see the following site:
   
  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx?pid=100
   
  If you have any suggestions for us, you can post them here .
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Is it possible to install Windows XP on a USB?

  Well, I've seen this tool to install windows 7 from a disk USB flash... it's called Windows 7 USB DVD Download Tool... This, I was able to install windows 7 Home Edition premium successfully, without a default... What is awesome about it, is that it is still faster than installing it leave a DVD... so I was just wondering if it is possible to apply it to my Windows XP and Vista?... my friend needs to reformat the PC, but it doesn't have a DVD player , or the drive of all... so I just thought it was my only option... All responses will help me to be awarded!

  Yes.

  You must ensure that the computer is able to boot from USB.

  And ensure that your format the USB key as a result.

  Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.

• LaserJet M1132 - scan not possible when it is connected to the USB of TimeCapsule airport port

  Hello

  I'm on Mac OS X Lion 10.7.4

  Installed the latest drivers to date: 1.2

  The multifunction printer is pluged on a TimeCapsule 7.6.1

  Printing works fine.

  But scanning is not possible using "HP Director" and with a brand like HP, I expect to have drivers with the message box from standard scanning Mac OS X (Capture of Image and therefore all software that use this API in the operating system).

  This works very well with a printer of a different brand.

  Is there a solution?

  Thank you

  Well Yes, by design, the USB port on the airport take in charge of printing, not for analysis or fax.  I'm sorry.

• Drag and drop question - Desktop and USB

  Hello!!

  I have an Asus laptop that I bought in September with Windows 8 is installed. I saw drag and drop questions on desktop lately, and I'll provide you with a full run down of what past:

  1. this particular case, I wanted to save my mobile by copying and pasting all the files from my phone to a USB (USB Kingston).

  2. I selected all files, right click to copy, open the folder that I made in the USB for my phone content and do a right-click Paste.

  3. nothing's happened, Explorer seems to have frozen, so I opened the Task Manager and press end task, all closed and restarted my laptop.

  4. I have excluded that my phone was the issue. I was able to create a folder on my desktop and copy and paste all of the content of my phone in the folder on my desktop.

  5. I tried to copy and paste / drag and drop an image from my office to the flash drive. Explorer Windows freezes on the rise again.

  6. I tried another flash drive. Explorer Windows froze again.

  Apparently I'm unable to copy files ON a USB key, which makes the backup and backup of things a headache because Windows Explorer stops working every time.

  I am the only user of this laptop, and I don't know what is happening or what to do. Any help would be appreciated. Windows 8.1 upgrade would solve this problem?

  Hi Karthik,

  1. There is no error message.

  2. I tried earlier drag - move my documents to my flash drive and it works perfectly.

  I just tried again to drag and drop from my office to my flash drive and for some reason, it works again.

  I don't think that was with my flash drives, but with Windows Explorer itself. Nevertheless, it seems to have fixed itself somehow. Thank you very much for your help!

• Is that possible to download on my desktop PC to my Mac laptop AND CC?

  Hi, I have a desktop computer (PC) and I want to install Adobe CC on it AND on my laptop (MAC). There is no problem with that? It is possible the downlaod version a PC AND a Mac version with my account?

  no problem, at all.

  and Yes, you can install your programs cc on an unlimited number of pc and mac computers.  You can only connect to and use the programs on, at most, two computers at the same time and both computers can be 1pc and 1mac.

• How is it possible to copy a playlist on a USB?

  My new car audio system has a USB port and is supposed to be able to play music from a USB 'peripheral '. So, I try to understand how to copy a mix of songs on a USB key. I made a playlist with songs in the order I want. Then I copied the files on the disk. I tried in my car, but it does not seem to recognize the drive. I tried to export the playlist, but all this did was to create a text file.

  I could just burn songs to a CD, but CD is not very good. I want songs much more than that and don't want to have to keep changing CD. So, how can I make a playlist that is playable from a USB?

  Hello

  Turingtest2 has a solution in this thread, but it seems a little complicated. Copy playlist to USB?

• Microsoft wireless desktop 2000 USB transceiver works do not.

  I have Microsoft Wireless Desktop 2000 for a while now, about 2 months.

  Its under warranty. Now, all of a sudden, the radio stopped working.

  I know because if I apply a slight pressure on the transceiver downwards, he begins to respond and when I take off the pressure, it stops responding.

  P.S. I also tried all the troubleshooting methods.

  I tried service and technical support centres. They say that Microsoft does not provide two-way radios separately and I buy the complete kit again.

  Now I can't do it because he is a few months old and I've spent a small fortune buying the kit.

  I hope someone at Microsoft to help me.

  Thank you!

  Hello KartikGudali

  Thank you for reaching out to us in the Community Forums.

  Please note that you are posting in the Forums for Microsoft band.  That your question does not match this product, you need to try a different path.

  You may be able to communicate with your retailer or your store, or continue to work with the support of your product range.

  Best regards

• Microsoft Wireless Desktop 800 USB keyboard and Mouse Combo transceiver

  Dear Sir.

  where I can get the new transmitter/receiver for Microsoft Wireless Desktop 800 as my transmitter/receiver is lost.

  Hello

  Try contacting Microsoft Support for a replacement.

  http://www.Microsoft.com/hardware/en-us/p/wireless-desktop-800#support

  Or check eBay.  You can find cheaper overall.