Post 1.04 Web access

Similar Questions

• Qosmio X 500: Outlook Web Access to message: Ulead MP3 codec v.1.0.18

  Hi all

  I have recently started working with a Toshiba Qosmio X 500.
  I am writing to report a mistake and term to get a solution for it.

  When I receive an email on my account accessed by Outlook Web Access Outlook, I get the following message:

  Ulead MP3 codec v.1.0.18

  Then the message blocks internet explore and I have to close the program. This issue has been described in

  http://answers.Yahoo.com/question/index?QID=20091106081119AAzR8bU
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/99c516ca-5bf8-4CE0-8204-5fe5a158b83a

  without specific answers. As this seems to be a particular problem in Toshiba and Windows 7, can you tell me what I must do to put an end to this problem.

  your
  Tiago

  Hello

  Someone posted this message on the mentioned page:
  I had the same problem. It occurred when I checked my AOL e-mail account. I figured out the sound "you have a message" which plays when you check your email triggers this Ulead Codec message. I turned off the sound in my AOL settings and it solved the problem. Still, I would like to know what the cause is. I hope this helps.

  It seems that this codec is somehow with your Outlook software.
  If this software codec is installed on your system, then you it could remove from the system. Go to-> programs-> programs and features control panel-> uninstall a program
  Here, you should look for Ulead Codec

  You can also try the option: features on or off Windows activate

• Web access Runtime

  Hi all

  I have a project that I made an exe file and posted on another computer.  When I run the exe I get the front running and can be accessed using the address of the site.  The problem I have is that I can't order the plate via the website.  If I try to request control of vi that I denied and error that displays on the runtime computer says that the request has been denied and to check the permissions.  I've been everywhere wherever I can think and I do not see where to put all the permissions on the pc of runtime.  When I'm on the pc runtime app works correctly but not web access.  Everything works fine on the pc of non-existent with the web and front panels.  Is it possible to take control of a Web site that is hosted by a unit of execution?

  I figured this out.

• Invalid connection file (vWorkspace Web Access)

  We receive the following error message on each first launch of an office published in vWorkspace Web Access

  

  On every second try the error will not occur.

  What could be the problem here? We lack vWorkspace 8.0 MR1

  We stumbled on this article: https://support.software.dell.com/vworkspace/kb/94234

  We have removed all special characters from the name of the application and name complete, but says not helped.

  Any help would be appreciated!

  Solve this problem using this post > http://en.community.dell.com/techcenter/virtualization/vworkspace/f/4827/t/19557970

  "

  The solution was to change according to the value of "true" to "false" in the web.config file in the inetpub directory

  Path: C:\inetpub\wwwroot\\web.config

  
  
  
   
     
     
     
     
     
     
     
     

  "

• Vmware server Web Access 2 does not work

  Dear vmware community:

  First of all thank you for taking the time to read this.

  I have a problem that looks like this isn't the first time that this happens, Yes, I was still unable to find an adequate solution.

  We have vmware server 2 is installed on a Debian 5 machine. Until yesterday, it was working fine.

  Today, when I tried to access to via web browser as usual, the page not load (the browser would say 'done, but the name of the page says "Loading").

  We have one of the virtual machines that are configured to start automatically, and it does not work as expected. The other I can't handle because I can't have the vmrun run perhaps (related?). So far, the only things that doesn't seem to work is web access only.

  There is one thing to note: after a restart of the computer, or restart the vmware mgmt, the service called "VMware Virtual Infrastructure Web Access" would show anything (while other services say "done" at the end of each line).

  I saw other people with similar problems here, and generally the solution was to reinstall the vmware server all on this machine. I would avoid this of course.

  Did someone already experienced this? Where I can look for more information on the VMware VI Web Access service won't start not (I do not know where are stored the logs of this service, maybe that can help).

  Please let me know if I should add any information, such as newspapers, etc.

  Thank you in advance!

  Hello

  I would recommend you check carefully this post and this post another may also help.

  Have you checked the vmrun documentation? Take a look at the file that I downloaded on this post.

  I would like to know if one of my tips work for you (or not)

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• How to create a local user for ESX Web Access?

  Hi, in my last post,

  http://communities.VMware.com/message/1444920#1444920 I enabled web access.

  But what is the best practice to create a temporary user directly on the esx to provide access of computer virtual via web access console?

  Thank you.

  You can have a configuration of the user for the local access to ESX and it will not be seen by vCenter.  ESX is not its userbase with vCenter synx.

  If you have vCenter, simply create a folder in your virtual machines and the view models, move the virtual machine in question in the newly created folder and add the AD account with permissions to this folder and assign a role.  You can then simply access the vCenter and all they will see, if the user does not have permissions anywhere elsewhere in your vCenter hierarchy, is the single guest.

  But, if you do not have vCenter you will need to create a local account on the ESX host

  Hope it makes sense.

• VMware VDM Web Access does not support your operating system (Windows7 beta)

  I got this message when connecting to the Server Desktop VDM:

  "The unmet requirements."

  VMware VDM Web Access does not support your operating system'

  my version: Office: Windows 7 beta with IE8

  I works perfectly with Vista Business SP1 (as host operating system) with IE7:

  VMWARE VDM Client version 2.1.0 build-596

  How can I solve this?

  Thank you.

  I'm not sure that there is a way to solve it.   The beta version is not in the operating systems supported on page 22 of the VDM 2.1 guide.

  http://www.VMware.com/PDF/vdm21_manual.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• Synchronization with Outlook Web Access

  I recently installed Thunderbird to access the professional email using Outlook Web Access. When I move a message in Thunderbird to a folder, I see that he is still in the Inbox in Outlook. There must be a setting of synchronization that I'm missing. Help is very appreciated.

  Lets see. OWA is not IMAP. You can access the exchange e-mail via OWA. Either using davmail or the add-on exequilla.

  The implementation of IMAP in Exchange is odd. This is mainly because that Microsoft never intended anyone to use effectively, but supported marketing needed to be able to tell. So you have Mail.imap.expunge_after_delete set to true and restart Thunderbird.

  Many parameters that have no user interface are read at the start of the program.

• How can I find a road to my old email 'Outlook Web Access' runner

  I've been using the messaging system of the University of Ohio (Outlook Web Access) and it was easy for me.
  I am now provided with TV, telephone and computer on the cable.

  Yesterday, I saw the words "Road Runner" on my screen and clicked on it to see what it was.
  Now, I've lost my email old system and must watch announcements and news, and worst of all, my email listed in very small characters that I can barely read.

  How reverse and go back to my easy access to Outlook?

  I guess that RoadRunner is your ISP, and you redirected to the RR pages for some reason any.

  If you use a bookmark try to access OAW through its login page.

  If printing of web pages is too small then make sure you are not zoomed out on these pages.

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• Firefox hangs with Outlook Web Access. Is there a problem with Quicktime or Firefox?

  When I've upgraded to Firefox 4.0, I had this problem as well and restored to 3.6. Then I upgraded to 5.0, it had been fixed, hope, but nothing helped.
  I'm on a Mac (snow leopard), and the problem occurs usually when I try to access my work email (Outlook Web Access). I get a box telling me that I have to update some Quicktime components, but never what says. (And my installation of Quicktime seems to be up-to-date.) He sometimes will allow me to ignore the error, but most of the time that it just hangs.

  I asked my service provider and he has a solution. Apparently, the format of the audio file, OWA sends in the notification of receipt of a new message is not understood by the default quicktime plugin. A work around is to disable the option to have a sound played upon receipt of new messages ('play a sound when new items'). It can be found under Options | Settings, mail tab.

  If we can know just what audio format is used by OWA, it would be possible to determine the good plugin and have the option active once again, without accidents or redirects.

  See you soon!

• 2012 Server r2 RD Web Access

  Hello

  I just upgraded my small office of about 25 users many remote users to Server 2003 R2 Server 2012 and I'm not a Windows guru. The old layout was remote users used a connection remote desktop to connect to the Server 2003, where they got their own user profile as Favorites files, documents, xls, etc. files. He will live these files on the local server running RD Web Access. I would move to RD Web Access but may not know how they will see their profile of office files. I've created a collection of session and that works very well to view the applications that run on the server. Don't know enough about what options are available in Rd Web Access? Can someone tell me how to proceed? Have also created the user profile drive, I do not see where is linked or not. Thanks for any help on this.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I'm unable to determine the correct HP Quick Web access to fast Internet security key

  I am unable to determine the correct HP Quick Web access to fast Internet security key?

  Hello

  You need to contact HP support, their documentation online and ask in their forums than
  is not a problem of Windows or Microsoft.

  These should help:

  Install and use the Applications HP QuickWeb
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=en

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failed to configure remote web access in Storage Server 2008 R2 Essentials

  I am running windows storage server 2008 r2 essentials. It is my second server. The first I own and been installed without any problems. The other is having a problem setting, web access remotely via the dashboard. Everytime I try to put in place the name domain the wizard fails, and I noticed that the windows server domain name management service stops. What should I do?

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/