power off the computer event tracker

Similar Questions

• Power off the computer problems

  Shut down the computer, and then become a computer restart. And not close to turn the computer off by pressing the CPU instead. How about the problems?

   
   

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all drivers are updated, especially on Windows Vista and Windows 7.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796
  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues.
  MS - MVP - Elephant Boy computers - don't panic!

• It is impossible of blocking off the PC, after I press the button power off the computer. Restart the computer again

  I'm Sylvie. These last 10 days, I have a problem with my computer.

  I press the disable button for blocking to the bottom of the computer, but the computer restarts. Why!, I have now

  Thnak you,

  Charles r

  Hello
   
  1. have you made changes on the computer recently?
  Try the methods in the links below and check if it helps.
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299
  
  Windows XP restarts when you try to shut down your computer
  http://support.Microsoft.com/kb/311806
  Windows XP stops and automatic restart problems
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx
  I hope this helps.

• Could not turn off the computer error: program not responding

  Original title: Power off the computer - Windows E

  When I try to shut down my computer, I get a box that says that the program is not responding.  I can stop by pressing the "Exit Now" option until all blue bars shortly arrive in the window.  In the contrary case, it crashes and I have to start over.  My system is Windows XP and my notes show there have been references to the two programs on the error message - #678 and #F14.  It's a minor inconvenience, but I want to fix it.

  THX,

  RonVV

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Windows stops responding during Windows XP closed: http://support.microsoft.com/kb/307274

  Method 2: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

  Hope this information is useful.

• Delay in setting off the computer

  When I try to turn my computer off or put it to sleep, there are about a two minute delay to hit button the computer turn it off until the screen next comes up asking me if I want to sleep, restart or power off the computer.  This just started recently.   Any suggestions on what could be the problem?

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all the drivers are updated.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues.
  MS - MVP - Elephant Boy computers - don't panic!

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - installation of programs: Please do not power off your computer. Installation close this window when you are finished.

  Original title: need help for reinstalling Windows XP.

  I am selling my computer, so I wanted to wipe and use my CD resource Dell 4 to put the computer back to factory settings. I got through the four discs and Windows XP starts (House) as usual, but then appears a screen that says:

  "Installation of programs: Please do not power off your computer." Installation closes this window when you are finished' and it alternates between this message and: "this process could take up to 30 minutes to be completed."
  Flashed it between these two screens for over 48 hours now... As to what he is hanging on, I am at a loss? I have to restart it once (about 26 hours on the right) and she appeared with this same screen once again. Help, please!

  Hi Joesmommy99,

  If you have the Windows XP installation disk, you can restart the computer and then try to format & install Windows XP again and check if the problem persists.

  How to install or upgrade to Windows XP

  Reference: Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get a message telling me go download 1 update and do not unplug or turn off the computer.

  I get a message not to unplug or turn off the computer until 1 update is complete.  After 3 hours, the same message appears and nothing has been updated.  WHA'ts the problem?  Thanks-John

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• MacBook Air - battery don't give power to the computer

  Hello. I damaged my MacBook Air with a cup of water. So now that it works correctly, only the battery is not communicating with the computer. It works on the power cable. So there is battery power. But the battery does not power to the computer. How can I fix it?

  Maybe a new battery solve the problem.  The best option is to bring the unit to an Apple store genius bar and evaluated it.  You should get a definitive answer here.  The assessment will be FREE.

  Ciao.

• HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

  HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected.

  It then prints until I have change entry. Then it occurs and stop and restart is necessary.

  FAX and SCAN properly.

  Hello

  Thank you for using the HP Forums. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Can't get through the screen "install updates" off the computer

  When I turned off my computer, Windows 7 has started to install updates. Once he arrived in 6 of the 8 updates installed, start the computer, installation. The computer remained on the same screen for 8 hours. I tried to turn off the computer, but when I turned it back on it went straight to page "6 on 8 installed updates. CTRL + Alt + Delete does nothing no more. How can I get rid of this problem, so I can actually get on the desktop?

  Hello

  References to Vista also apply to Windows 7.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Why after I turned off the computer num chance works also

  Please can you help me fix my computer

  Could you try that again once please, no information is here so I can't help you.

  'Why once I turned off the computer... also numlock works' looks that separate the 2 points, so could you please develop and provide more information.

  How to ask a question:

  http://support.Microsoft.com/kb/555375