Power outage of State driver

Similar Questions

• Problem starting after power outage

  I am running XP Professional. Last Nite we had a power outage and now I can't get my Dell E510 to initialize. When I reboot, I get a message that my hard drives cannot be seen. I tried holding F8, but it doesn't get me nothing, but the same message. Disc I tried diagnostcs but the computer says it can't see the disks. Any help would be really appreciated.
  Frankdarpa

  Hello

  1. What is the exact error message?

  You can check the troubleshooting provided in the link below steps to fix the problem.

  http://support.Microsoft.com/kb/321626
   

• We had a power outage, when I tried to re start my computer that I seem to be in a loop

  running don't win Xp, up until now no probs

  We had a power outage, when I tried to re start my computer I seem to be in a loop, after the original screen I get a message saying there is a faulty attempt to restart please use one of the following departure, upward in SafeMode etc it returns right on the same page black and white How can I break this loop?

  Often, a power failure will result in the corruption of the hard drive that can prevent your computer from starting properly.  Often, simply perform a 'chkdsk' with the /f or/r (chkdsk C: f) option on the hard drive will fix the problem.  Given that your machine does not start, you must run Chkdsk from the Recovery Console or start your machine from a CD for example bootable BartPE or Ultimate Boot CD for Windows and perform the chkdsk operation

  "How to install and use the Recovery Console in Windows XP"
    <>http://support.Microsoft.com/kb/307654 >

  HTH,
  JW

• HP TouchSmart IQ816: Conversion of Solid State Drive

  I want to upgrade the hard drive in my HP IQ816 to an SSD.  I'll clone and then redeem on the HD with the SSD.  I'm trying to find a compatible SSD (256 GB). HP presents a Kit - 2.5 "Solid State Drive & Upgrade Kit v300a/ak

  I wonder if who is the kit good or is there a better or more consistent for this purpose.

  Thank you...

  Rick

  You will find it useful:

  Upgrade manual

  It's the HP upgrade kit:

  http://www.shopping.HP.com/shopping/PDF/h5a88aa.PDF

  Don't know how much it costs but I suspect you can get a much cheaper SSD. Also, I would say that you can use any 3.5-inch bolt adapter 2.5 in this with the SSD in the sled used originally for the larger HARD drive and place the data and power on the SSD SATA ports to the outside, you can connect the wires from inside the computer for them.

  

  http://www.Amazon.com/Silverstone-technology-3-5-inch-converter-SDP08/DP/B002BH3Z8E/ref=sr_1_3?ie=UTF8&QID=1438631892&SR=8-3&keywords=3.5+to+2.5+inch+hard+drive+adapter

  Let us know if you need help most.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• PC business shows "this copy of windows is not genuine" after a series of power outages this morning

  Hello.

  According to other posts, I read on this forum, I have downloaded and run Microsoft Genuine Advantage Diagnostic Tool 1.9.0027.0)

  Here is the output from the top of the program:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - MV8MH - 98QJM-24367
  The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
  Windows product ID: 55041-OEM-8992671-00437
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {4EF2BF7F-1125-4B2E-8F80-E8C9C810AD54} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4EF2BF7F-1125-4B2E-8F80-E8C9C810AD54}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2436755041-OEM-8992671-004372S-1-5-21-556887043-3575416894-1936512369LENOVO7052A7ULENOVO9HKT54AUS20121016000000.000000 + 00041563E07018400FE04090409Time(GMT-08:00) Standard Pacific13LENOVOTC-9 H 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514
  Error: the product key is not found.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 10:8:2014 17:51
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LAAAAAEAAQABAAIAAAABAAAAAQABAAEA6GHgk + KnXL90GK4pfFsqNMp4LnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TC - 9 H
  FACP LENOVO TC - 9 H
  HPET LENOVO TC - 9 H
  MCFG LENOVO TC - 9 H
  SSDT LENOVO TC - 9 H
  SLIC LENOVO TC - 9 H
  ASF!   LENOVO TC - 9 H
  TCPA LENOVO TC - 9 H

  After several power outages, it restarted and reported that it was not authentic. It was pre-installed Lenovo machines.

  I did a restore of the system to the oldest restore without changing point.

  This is urgent as a manager must Access this PC and data therin.

  Error: the product key is not found.

  Windows Activation Technologies-->

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• My new S2440L face the problem of power outage

  I have just purchase S2440L to replace my old S2340L. With S2340L, I have never have any problem of power outage but when I plug my new S2440L, it was goes black for a few seconds. The problem was random 10 minutes to 40 minutes. These two monitor was same HDMI cable (and work fine on my SmartTV too), PC same and even graphic card driver. I try to reinstall a fresh driver but still a problem. Is - it could be hardware related? Perhaps S2440L have a hardware problem or a S2440L need a more specific HDMI cable? Now I have any problem with my S2440L. the blackout has been occur when overheating circuit behind the monitor. I was watching about about on the HDMI port of overheating by googling and found that HDMI can fail if the (amplifier HDMI) circuit was overheated (I'm not have overheating issue on my old S2340L (rev.) A00). i sure as S2440L (mine is rev. A01) have material problem on HDMI and circuit surprise (lower part of the monitor) have very high temperatures. I hope you, Dell will be it is your responsibility that your monitor, S2440L have an overheating problem / high temperature and could be a HDMI port blackout curtains. It's bad for me avoid this problem by using the VGA port.

  Thank you, ChozeriZes.

  Christ

  I just touch the border smaller surface compared to the top edge, it is very hot.

  maybe only my S2440L have this problem...

  Today, I remove my VGA card and the power cord, and reinstall the whole again, the problem in black often seem to not like it before summer. It's just a couple of times for that day.

  Actually I feel fine with this monitor, both design and image, but still nervous about high temperature, it's may be the major problem in the long term.

  Maybe I was too early to conclude everything... HDMI is a very sensitive matter, as I said in a previous comment, then I have some tests for my S2440L

  -overclock grid power my VGA card around 2% and delete some fan of my system.

  -find the new place for the power adapter avoid the heat. (I found this use of monitor LG IPS 1. 3a adapter 19V is perhaps)

  Note: I use 750W Seasonic and power supply of 5V and 12V is pretty good (5.1V and 12.05V).

  OK, now I need to close this thread as solved and and report this problem like power supply problem; in major relate.

  "on monitor blackout curtains when use the HDMI port occurs when power on unstable system will also be able to rack in the House, heat and cable must use HDMI1.4 full spec for sure (if HDMI cable does not include with the package).

  Best regards

  ChozeriZes

• Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

  I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

  In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

  Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

  This is Mac OS extended (journaled) with a GUID partition map.

  OS X will only be installed on a properly formatted disk.

  HTH

  Leo

• Bookmarks lost, restore doesn't work (backup files exist), empty library, power outage this morning, HELP.

  power outage this morning... dunno if Firefox was open

  Now the go bookmarks

  library completely empty

  Restore backup gives the message: "failed to process the backup file".

  cannot save new bookmarks

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• Satellite Pro S300 EZ1514 - could not initialize Solid State Drive (SSD)

  I have a Satellite Pro S300 EZ1514.

  Recently I bought a SATA II 64 GB SSD to replace hard drive current cavalry. I first tried to install XP with SATA drivers rationalized in.
  The installation process recognized the SSD and has the original file copied to it, but when it restarted to continue the installation process the system wouldn't boot from the drive.

  Then I tried to install Vista Business 64 from the recovery disk came with the laptop.
  After launching the recovery disc, the said installation process the hard drive has not been initialized and click OK to initialize now.
  After clicking OK to initialize the system not restarted that at the end pointing upwards on the screen telling me to initialize the hard disk.

  Then I tried initializing the disk manually on my desk.
  Plugged into my office, initialized and formatted in NTFS. Plugged into the laptop to retry recovery Vista. And once again the same screen appears. Reconnect the disk SSD the Office to see that the player has is more initialized and was to be initialized again.

  Then I gave up and installed the SSD on my desktop under master boot and installed perfectly fine with XP. For testing purposes I then handed the ssd with XP pre-installed in the cell to see what happens. To my dismay the computer laptop would not boot and on top of that when I put the SSD drive in the desktop only to see that the drive has been initialized is no longer and I had to reinstall XP again.

  Conclusion:
  It seems that the Satellite Pro S300 series is not easy SSD and just post it self off Initialise the Solid State Drives.
  This seems to be the logical conclusion that the SSDS works perfectly well on my desktop and the laptop is fine now with the old turntable hard back in.

  Does anyone else have this problem or a solution?
  I would still put the SSD in my laptop to save energy.

  Hello

  The laptop is equipped with common serial ATA HDD.
  The SSD might work, but is not a must.

  There are several different SSD on the market and a problem of compatibility of equipment can always happen.
  Maybe an other SSD would work properly, but these are just suggestions.

• I have a "Macintosh HD". -What Mac has SSD (Solid State Drive)?

  I have a 'Macintosh HD' end 2013.

  SSD vs HDD: http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

  -What Mac is equipped with an SSD (Solid State Drive)?

  Jona li

  If you have a retina display, had an SSD, you can check by clicking on the Apple in the menu bar and then click on "about this mac" and "storage".

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• Solid State Drive

  Hello

  I have a HP 15 t-n200 (Pavilion TouchSmart 15 t), not product. F4W68AV.

  This laptop can be upgraded to use an internal Solid State Disk drive?

  In addition, by examining the characteristics of this laptop, it does not specify the interface hard disk other than SATA 300 MB/s transfer rates.  Anyone know if it is SATA I, SATA II, SATA III, mSATA or...?  I find the specifications in the service manual to be a little less useful since the maintenance manual usually cover a wide range of products, and I have a wire deterimining trouble just what hardware is inside of me.

  For example, in the case of the drive hard, my original Bill said I have a 750 GB 5400 RPM hard drive.   The repair of the lists at least two possibilities that fit this description, namely p/n 634250-005 (750 GB, 5400 RPM, 9.5 mm) and 732001-005 (750 GB 5400 RPM + 8 GB NAND hybrid, 9.5 mm, for use with computer models equipped with Intel processors).  Now my TouchSmart has a 4th Gen processor Intel i5-4200U.  So does that mean I have a p/n 732001-005?  How can I be sure?  By reading the manual, the hard drive is not accessible AFAIK, so how in the world you will find what you really inside?

  Thank you.

  Please see your order confirmation, duplicate customer, or invoices for the exact specifications of your computer. According to the HP Pavilion 15 Notebook PC HP Pavilion TouchSmart 15 Notebook PC - Maintenance and Service of Guide for your computer, this model supports the following:

  6.35 cm (2.5 in.) of hard drives in 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
  Customer-accessible
  Serial ATA (should be SATAIII, which is compatible with SATAII)
  Protection accelerometer support

  Supports the following drives:
  1 TB 5400 RPM, 9.5 mm

  750 GB, 5400 RPM, 9.5 mm
  500 GB, 5400 RPM, 9.5 mm and 7.0 mm
  (Supports the SSD mSATA 24GO with system memory up to 8 GB (for use with models to select a computer with Intel processors and discrete graphics switchable))
  Supports the following hybrid readers:
  1 TB 5400 RPM, + 8 GB NAND hybrid drive HARD; 9.5 mm
  750 GB, 5400 RPM, + 8 GB NAND hybrid drive HARD; 9.5 mm
  500 GB, 5400 RPM, + 8 GB NAND hybrid drive HARD; 7 mm

  The supported above list is not exhaustive and is typically what HP moved to the factory. Assuming that your Bill lists the 750 GB 5400 RPM hard drive, it's not going to be the 750 GB, 5400 RPM, hybrid HARD drive because there is no indication whether the hybrid. Your computer will also support most hard SATAIII after-market, hybrid hard drives and SSD drives (solid state drives).

  Removal instructions / replacing the hard drive begins on page #63 of the HP Pavilion 15 Notebook PC - Maintenance and Service of Guide. These are very detailed instructions and require the dismantling of many components.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Z600: Nvme Solid State Drive and Z600 card mother Hewlett-Packard 0B54h

  I would like to know if the motherboard of Hewlett-Packard 0B54h (BIOS Hewlett-Packard 4 786 v03.57) accepts NVME SOLID STATE DRIVE to boot from the primary.

  I have a Z600, dual Xeon X 5650, 48 GB of Ram.

  Thank you very much

  Hello

  Please check the pages 7 & 8 of the following document:

  WWW8.HP.com/h20195/v2/GetPDF.aspx/c04111619.PDF

  Kind regards.