Power, suite or night...?

Similar Questions

• Recorder of power on all night - this will damage the Machine?

  I have recorder DVD Sony RDR - GXD455. It damages the machine in order to leave the device in the mode works from one day to the next? I have finished a record last night and stopped the device after completing recording a movie, but I forgot to turn off the power to the machine. This case could adversely affect the unit? Thank you for the answers.

  Condition it has good ventilation, the recorder must be perfect being left on all night. Make sure if it is in a center of entertainment, wardrobe or a shelf there are two or three inches of space above so it won't get overheated. Also, avoid placing the recorder directly on top another component, such as an AV receiver that will generate heat.

• False values of voltage using NI 9225 and ELectrical Power Suite 2014

  Hi all

  I have a few problems regarding the use of a map of analog voltage NI 9225 with code exaple quality Applications of power (cRIO) (Delta-Sigma) of the Electrical Power after 2014. Running the example code I values of voltage wrong, they are exactly doubled! For exaple with a 230 V RMS input I get 460 V RMS. I think the problem is the module, because by default, the code example expects to use a module NI 9242. Before the upgrade to LabView 2014, everything worked perfectly with EPS 2013. Am I something missung? I configured the C module in the project manager in the same way that I used with EPS 2013. Can someone help me? Thank you

  Gianluca

  Hi Gianluca,

  If you use other types of modules in the example, you must take care of the conversion of accuracy in the FPGA VI.

  As FPGA VI resampling takes the signal of type fixed point +-24.1, you convert the +-24,10 and-24,5 to 24.1 in the Data Acquisition loop before feeding to the FPGA VI resampling.

  And in the loop of data Communication, you restore the output of +-32,3 to 32,12 - signal + and +-32.7. Notice at the time the zoom in and zoom out are equal.

  If you change other types of modules of different precision, you must change the precision of the given thread.

  For example, 9244 accuracy is +-24.11, so when you convert it to +-24.1, you must restore it by variation of-32,3 to-32,13.

  Please refer to the screenshot:

  

• Fans always operate at high speed after power failure

  HP Pavilion Slimline S5780T - Windows 7 Home Premium 64-bit

  After a power failure a night or more recent, our Pavilion Slimline case fan and CPU fan have both run at high speed all the time, starting from the system. The level of noise is intolerable.

  I opened and cleaned all the dust from the inside of the case, including the removal of the heatsink from the CPU. Everything is clean.

  I ran the following HP Vision diagnostic, test the system, including fans. During the test of fan, the fans ran at 100%, then fell to the former level normal, quiet, then ramp back up to 100%. So says HP fans diagnostic tests are OK when there is always a problem. And it is possible for them to run at slow, normal speed.

  I installed the free SpeedFan utility, but there is not place to adjust the fan speed manually.

  How can I find the problem and the fans run at normal speed, as they did before the power failure? Everything that controls the speed of the CPU fan and the fan is broken.

  Thank you and best regards,

  Stephen - Myrtle Beach, SC

  Strange things happen when power flucuations or failures occur.  Most probably the motherboard has been damaged by the PPE and that is normally not as repairable by a DIY.  If you could find a newer BIOS, that to solve the problem.  Since there can be no more recent BIOS, try to remove the battery from the motherboard for the night and then put the file in and reset the BIOS to see if that helps the default value.  Otherwise, it might be repairable.

• iPhone not charging when connected to the USB power adapter

  Hello. I have a 5 s iPhone that I bought used a few months ago. It works very well.

  Normally I charge it by connecting it to my Mac via a USB cable. Last night, I tried to recharge by connecting Apple USB power (also called a power outlet) adapter, which plugs into the wall, supplied with the phone. (Here's a link to the adapter if you are not sure what I'm talking about:.) When I connect the iPhone to the power adapter, I saw that the phone is charging - there was the small icon representing a lightning bolt near the battery of the iPhone.

  However, when I woke up in the morning, the iPhone has been charged only 47%. I don't remember what the percentage was when I plugged into the power supply last night, but I don't think that the phone at that time was much less.

  So I wonder: nobody knows what went wrong? Is there a way to make sure that the phone is loaded with the adapter?

  Thank you!

  M

  If there is a symbol of bolt of lightning next to the battery icon, then the phone should be in charge.  If it is charging a single source, but not another, then the problem is with the unpaid source.  Try another adapter to confirm.

• S10 Bluetooth with nokia pc suite

  I am a new user of s10 and very happy with this laptop. After a long time of waiting, finally I got it by last Friday. So happy with the model, and run it. But when after I have install nokia pc suite last night, that a problem came when I try to plug it, pair the two unit. the bluetooth s10 software take the matching process, the process of pairing completed without problems, but after peeling here see a dialog box saying "cannot authenticate the phone" If the phone cannot connect with pc suite.

  can someone help me solve this problem? I already try to uninstall the bluetooth of s10 software and change with the new program of Blue Sun, but the Blue Sun can not find the bluetooth hardware. even with the broadcom bluetooth software, which tell me can not find hardware bluetooh.

  So what I did to make the connected phone, don't make me disappointed with this s10 due to this technical glitch.

  Thanks for your help and your attention

  Best regards

  blackpepper

  Hi blackpepper,...

  I managed to solve this problem by removing the driver and the software original and used microsoft bluetooth stack.

  1. remove all the driver of bt in Device Manager

  2. remove the bluetooth program, as appropriate. In your case, it will be the Sun

  3. navigate to c:\windows\inf (hidden folder) and copy bth.inf to any folder as a backup.

  4. open bth.inf with notepad, after the; - Device section - Start - line. You can choose one of the unit and replace the value "USB\VID_0A5C & PID_2150" without citation.

  for example

  [Broadcom.NT.5.1]
  BLUTONIUM BCM2035 Bluetooth 2.4 GHz Single Chip Transceiver = BthUsb, USB\VID_0A5C & PID_200A
  Single-chip 2.4 GHz Bluetooth transmitter/receiver BCM2033 = BthUsb, USB\VID_0A5C & PID_200F
  Bluetooth = BthUsb, USB\VID_0A5C & PID_2150 BCMNokia (you can name the device as your desire, I named it BCMNokia)

  Save and closed the bth.inf

  5. go into Device Manager, scan for change of hardware, and you should be install with the ms bluetooth stack driver.

  cheeers...

• Is NEITHER-Industrial Communications for IEC 61850 covered by all NI Developer Suite?

  Hello

  I downloaded OR-Industrial Communications for IEC 61850 14.0 and tried to activate it using my serial number for NI Developer Suite. However, I was said, "the following order numbers are not valid or do not correspond to their corresponding products.

  The same serial number was accepted for activation of OR-Industrial Communications for Ethernet/IP, so I thought that I would have access to all communication, including IEC 61850 toolboxes. Is it not the case? How can I check the toolkits are covered and which are not?

  Thank you!

  Hi JKSH,

  1. the NO-Industrial Communications for EtherNet/IP is included in the Developer Suite, as mentioned JDizzle: http://sine.ni.com/nips/cds/view/p/lang/en/nid/202469

  2. the IEC 61850, DNP3 and IEC 60870 toolkit are not part of the Suite of developer.

  3. However, you can buy Electrical Power Suite Pro + amulet of usefulness of the protocols and it has the EPS Pro and IEC 61850 and DNP3.

  http://www.NI.com/download/LabVIEW-electrical-power-suite-2015/5380/en/

  4. or you can buy each (IEC 61850, DNP3 and IEC 60870) toolkit separately

• Power meter

  Hello

  I want to meausre voltage, current and power of a vacuum cleaner 220kW AC for Lab View. Can anyone help in the material side that all the components I need. I have little knowledge about it.

  Cecile

  Do power measurment the current and voltage must be sampled at the same time, in the same clock cycle.  Most of the DAQ hardware NOR has a single ADC and they workpieces between channels quickly with a MUX.  It will not work for you, and you actually use a simultaneous sampling equipment.  Here's an article that talks a little about it.

  http://www.NI.com/white-paper/8198/en/

  Basically, for this example we measure voltage of phase 3 with a 300 Vrms 9225, 3 put in current with a 92275ARMS phase, then a unique, the cheapest cDAQ chassis is a 4 connector 9174.  If you need more power or voltage, then you need sometimes a kind of buffer that can convert your high voltage or current in a - 10 v to 10 v and use a 9239, then scale it up upward with the software.

  Oh and if you want to get real fancy you can buy the power suite software too.

• PC in a cycle of restarting after power surge

  Win XP SP 2
  NVIDIA 8800 GTS
  2 gig Ram
  P5N32 SLI
  Hi guys,.
  I hope someone can throw me a BONE here, because I don't know which way to go with this.
  Basically, power surge last night, my PC will now in a cycle of infinite when turned on reboot.
  I can't start in safe mode, as it hangs on the list of files. Cannot start last well-known, cannot start from the CD, at the risk of going as far as "Checking hardware" and restart.
  So, essentially I can't anything. I guess it's obvious that some hardware is fried, but I can't afford to replace things to chance - any suggestions on probable causes, or ways I can limit?
  Thank you
  KeV

  Hi KevTM,

  Method 1:

  I suggest to disable automatic system error reboot and check the error message.

  Prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  To do this, follow the steps below.

  To start Windows in safe mode, follow these steps:

  a. click on the electric start button
  b. to enter the Windows xp advanced startup option.
  c. when the computer starts up press and hold your "F8 key" who should bring up the "Menu Options advances of Windows". "»
  d. use your arrow to switch to "disable automatic system failure reboot" and press your enter key.

  Here, you will need to check the error message or you receive an error code.
  
  Method 2:

  Try to disconnect all the external devices connected to the computer except the mouse and keyboard and try to start the computer and check.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• iPhone after iOS 9.3.5

  Recently, I upgraded my iOS to 9.3.5.

  Now my iPhone 5 will hardly retain a charge for a day with little or no use.  And it loses about 25% power during the night.

  Everyone knows about this problem?

  Thank you

  For the record of previous updates... It seems that some updates require some extensive 'household' that causes the CPU work behind the scenes until the end.
  See this response 'Recommended Apple' > Re: update ios 9 battery drain problem

• WD MyBook will not mount on Mac

  I have two WD MesLivres, attached to a Mid-2015 15 "MacBook Pro (MBP) running El Capitan 10.11.5." Both drives are formatted with OS X Extended (journaled). We had a power failure last night. This morning, I restarted the MBP and the 2nd MyBook would not rise. I rebooted and stirred around, nothing helps. The player turns on and seems to turn but does not show in disk utility or command terminal disk utility. I have dl had HFSExplorer and installed on a Windows 7 laptop. This utility allows to read but not write on a windows pc, a Mac formatted disk. I joined the MyBook2 laptop Windows 7, launched HFSExplorer and, Lo and behold, he can read the disc in mac format. So, what can I do to get the MacBook Pro to mount this drive? I am at a loss!

  The fixed! Nothing very elegant. I shut down the MacBook Pro (MBP), swapped the USB 3 cable the recognized MyBook (Mo1) with the unrecognized MyBook (MB2), restarted the MBP and the MB2 is recognized. I swapped the cables for their original and all drives work. Why? I have no idea!

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• NB100: battery discharges in hibernation mode

  Now that my hibernation function works OK, I used most of the time, I let the netbook.
  So it is faster to recover after hibernation that restart.

  But I notice that landfill of battery substantially; It is usually on the critical alarm level after some 12 hours of "hibernation".
  Is this normal?

  The device is new and so is also the battery. He holds for about 3 hours in normal use.

  Hello

  Usually the battery needed to dump also if the laptop would it boot mode (simply DISABLED). I read as the options enabled like Wake up on LAN, etc. needs a small part of the battery power even if the laptop is not enabled. Could the battery loses power during a night between 10% and 15%.
  If the laptop is in hibernation mode the battery could lose more than 15%.

  However, I think that you should check the BIOS settings and should disable options like Wake up LAN, etc.

  Welcome them

• Re: Satellite R630-144 battery loss 10% overnight

  Hi people

  I own a R630-144 (i3-370 m, 4 gb, 320 gb hdd) with Win7 64 bit HP for about 4 weeks now.

  I ve installed the update to the newest bios and installed all the drivers for the system to operate neccasarry.

  So I use it for office tasks and the media right now, use it on battery for most and it loads like every two days.

  Recently, I discovered a loss of power during the night (essentially at its stop for awhile) between 5 and 10%, which according to me is huge!
  Laptop is closed down completely, without sleep, or something like that.
  Just last night I took it upwards and after about 12 hours now I start it and begin with 93% autonomy?

  Is this normal? Anyone else having similar problems?

  Thanks for the replies, happy new year
  see you soon

  > Recently I discovered a loss of power during the night (essentially at its stop for awhile) between 5 and 10%, which according to me is huge!

  This Toshiba document may answer that:

  + Why battery empty 15-20% when it is turned off at night? +
  http://APS2.toshiba-tro.de/KB0/FAQ9C015N0001R01.htm

  Had the same problem and disable the wake on LAN helped with this problem.

• Re: Satellite Pro M70 - high utilization of the processor - low Performance

  I sincerely hope that someone can help you. I do not consider myself really computer illiterate, but this is where my understanding ends and I really value any assistance.

  I have a Toshiba Satellite Pro M70 for 2 years and I'm a final Defender to Toshiba. However, my operating system is slow. Average day use with Internet Explorer and Office 2007 is a laborious process that takes too much time. I have had conflicts with Trend Micro Internet Security 2008, that works perfectly.

  But turn on the computer takes forever. The CPU usage is generally high and System Idle process as well. I reinstalled Windows XP from the Boot Toshiba DVD already 4 times to nine and install everything over and over again. Each time after all to speed once again, performance is disappointing.

  I expanded RAM to 1.49 GB that makes little difference from the original 1/3 of RAM. It seems that something is slowing down the computer, but it is not visible in the process; but a certain process of svhost.exe who have the ability to handle little or the CPU usage.

  I've used Windows Gold Certified Uniblue Power Suite with a good registry cleaner. This helps a little, but after a few days, it seems only make it worse. I have a processor Intel Pentium M 1.73 GHz. search online reveals that Trend Micro IS 2008 is pretty good and demanding little capacity compared to the competing security packages.

  Is this system/software related or it could be a hardware problem?

  Thanks in advance to all!

  Hello

  I doubt that it could be a hardware problem, I mean a CPU usage can get if a certain service or applications would be run in the background of the OS.

  Generally, Antivirus applications are a kind of software that could cause this problem I had a Norton System works installed on my laptop and this software needs a lot of resources that slowed down the laptop
  In addition, some applications of Toshiba which are installed and running in the background may affect performance. But these applications are required to be able to use all the features of the laptop

  However, in msconfig you could disable.
  Launch msconfig-> Startup tab and disable some processes that are not necessary for you.

  In addition, you can use the CCleaner to clean the registry and operating system