PowerConnect 6200 series interoperability with 3Com Switch 5500.

Similar Questions

• How to automate the SSH connection/commands on a series of switches PowerConnect 3400 3500 and 6200 series.

  I'm trying to find a way to automate the commands to send a series of switches (about 20) showing some configs and save the output to a file. The way I was trying to do was using plink and creation of a batch of files for her.

  Essentially, it would be something similar to the following.

  ECHO for /f % in (devices.txt) plink % l word of PAST of USERNAME-pw-v - m C:\Batch\commands.txt > output.txt

  To split the above command, looking for my ips in the devices.txt and made a "plink pw - username PASSWORD - v IP-l m - COMMANDS > OUTPUT" for each. The problem, I'm running is that the switches do not accept logins, they constantly ask for the user and the password again. Even when you try to put them in the commands.txt he will not accept the entry. I googled using plink with dell switches but there is nothing to talk about this problem.

  So my question is, is it possible to automate this sort of thing in a batch file? Or some way to automate a series of commands to a switch via SSH? I'm just not wan't do manually connect to each of them, carry out my orders, out, reconnect and repeat. I did it on cisco switches so I thought the process would be similar but I don't understand what obstacle I'm running in here. Ideally, I'd like to see how to do this via SSH but at this point, I am ready to accept almost any alternative (secure) to automate the sending of orders for my switches.

  I hope that all makes sense.

  Sorry, I haven't used before plink, so I'm not sure what to change to get this to work. In the past, there was another Member of the community who has been able to use expect to establish connections to switches and save configs.

  Linux.Die.net/.../expect

  It may be somewhat more than installation, but you can be able to make it work for your needs.

  http://Dell.to/1RONL3D

  Let us know

• OfficeJet 6200 series, 6210xi: need an all-in-one software for Windows 7

  I have a HP Officejet 6200 series, 6210xi, and my old software that came with the printer does not work with Windows 7. Home Premium. Where can I download the software.

  I want to use the scanning feature to scan a document of several pages of text and then convert it into a Word document. All this experince. Is it useful to pursue this goal in this way? Thank you.

  FreeOCR and OCR to Word work very well.

• CWDM between Powerconnect 6200's

  Hello

  I try to get CWDM working between two sites in London on Dell Powerconnect 6224 and 6248 a. I have the 2 x 10 GB SFP + modules both at the back and some optical CWDM SFP + listening that are coded to dell.

  I have a link on both sides, however, cannot get any job adequate connectivity. Another post suggested that they were working with these switches before CWDM.

  I've put the transceiver diagnostic information below:
  
  Site1:
  Temperature         54.1  (oC)
  Voltage         3.293  (V)
  Current         23.3  (mA)
  Ouput Power         -2.470  (dBm)
  Input Power         -10.685  (dBm)
  Transmitter Fault         No
  Loss of Signal         No
  
  Site2:
  Temperature         50.1  (oC)
  Voltage         3.239  (V)
  Current         29.9  (mA)
  Ouput Power         -0.496  (dBm)
  Input Power         -13.747  (dBm)
  Transmitter Fault         No
  Loss of Signal         No
  
  On both sites we are seeing transmit data but no received:
  
  Site1:
  Receive Statistics  Total Bytes(Octets)         0
  Unicast Packets         0
  Multicast Packets         0
  Broadcast Packets         0
  Packets with Errors         0
  Packets Discarded         0
  
  Transmit Statistics  Total Bytes(Octets)         390208219
  Unicast Packets         50889
  Multicast Packets         140321
  Broadcast Packets         1106698
  Packets Discarded         3
  
  Site2:
  Receive Statistics  Total Bytes(Octets)         0
  Unicast Packets         0
  Multicast Packets         0
  Broadcast Packets         0
  Packets with Errors         0
  Packets Discarded         0
  
  Transmit Statistics  Total Bytes(Octets)         2346760
  Unicast Packets         0
  Multicast Packets         24674
  Broadcast Packets         0
  Packets Discarded         0
  
  Any suggestions, should CWDM SFP+ optics work in these switches?
  
  Thanks,Peter
  

  Hello

  I don't think that no matter what optical CWDM provided by Dell.

  Anyway, I managed to borrow some perspective to test with and they work very well. CWDM works on these switches...

  Peter

• How to configure the port to connect the SG300 switch to 3com switch

  Hello

  I need help. I have my network with multiple switches SG300.

  I have one of them as my base switch working mode layer 3. With 2 VLANS and vlan interfaces to each vlan.

  Everything works ok.

  But now I need to plug a 3com unmanage switch who welcomed of vlan 1 and 2. How can I connect this switch to my Cisco sg300 switch? Which mode to use in this port?

  Thank you very much.

  SG300 Switch L3

  I have

  I have

  SG300 L2 switch

  I have

  I have<-------- how="" should="" i="" configure="" this="" connection="" to="" support="" all="">

  I have

  3Com unmanage switch

  I          I

  I          I

  I have vlan 1

  VLAN2

  Use of VLAN based on MAC on SG300 L2 switch, record all customers on the required VLANs (or better configure port SG300 L2 to 3com in VLAN PVID with maximum and other clients in the VLAN based on MAC).

• Ho fatto non trovo più pasticci he mio number di series by willing e switch Creative Cloud, come posso fare?

  Ho fatto non trovo più pasticci he mio number di series by willing e switch Creative Cloud, come posso fare?

  !

  creating cloud does not have a serial number.  It uses your adobe id.

  Download the creative cloud desktop application (after signing with your adobe ID), apps download Adobe Creative Cloud | CC free trial Adobe

  and use the desktop application to install your adobe creative programs of cloud.

  If you already have the cc desktop application and you will need to update your adobe id, connect, disconnect | Creative desktop application Cloud

• Problem with GS716T Switch

  This morning we plugged a phone Avaya IP (5621SW) to our network. It synchronized to the top, as it was supposed to, but we started to receive calls on PC hide. After some research, it seems that all PCs connected to a GS716T switch indicates no network connection when the phone is connected. Unplug the phone and turning the power on/off switch everything returns to normal. No other Netgear switch have been affected. We have replaced the GS716T with another switch (not a GS716T) and connect the IP phone has no effect. Wondering what it might be on the GS716T which makes it sensitive to the IP phone? Any thoughts?

  Hello Kelley,

  Well, this isn't the configuration that I expected. The model number of the phone was 5621SW, so I thought that the connection is PC > phone > switch. I tried searching a few cases reported on the GS716T and did not find anything related. This problem is, I should say a little weird, since they do not use the same switch. But let's start the update of the firmware.

  We will wait for your update.

  Thank you

• T420s + Mini Dock Plus Series 3 with USB 3.0 90W - USB 3.0 works as USB 2.0

  Greetings!

  I'm probably not the first person who cares, but I did not find the same topic in the forum.

  I have T420s Lenovo ThinkPad Mini Dock Plus Series 3 with USB 3.0 plugged 90W. The problem, I USB 3.0 port on the dock (blue) work in USB 2.0. The port of the laptop works very well. I check it by plugging Seagate drive HARD mobile - when the HARD drive is plugged into the port blue station dock Windows (7, 64-bit) complains "device can run faster", using the port laptop does not trigger the message.

  USB 3.0 is installed.

  BIOS version is 1.37.

  Drivers Intel Chipset are updated.

  Device Manager displays the connection as a chain of two "Generic USB Hub, if the HARD drive is connected to the laptop port its chain of" Renesas Electronics USB 3.0 blah - blah ".»

  Help, please! If this combination is not supported, please point to the corresponding link.

  Thank you!

  USB 3.0 port on the dock is not supported on the T420s, it is supported only on T430s and later versions.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=ACCS-Guide

  It allows to find the document listed in the link.

  I have the T420s and T430s with this docking station.

• Can I configure NISE with a switch of party - if the switch is not installed?

  I've never used NOR Switch before Executive - we hope to use it on a new project.

  We do not have equipment at the moment - we will use a Pickering 40-540-021 '132 x 4' switch.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? I get an error when I create the NI Switch Executive virtual device. Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  Here's what I've done so far:

  -Install the drivers of Pickering.

  -To the MAX (v5) I have setup a session driver IVI and logical name.

  When I try to create a new NI Switch Executive peripheral virtual, I add the logical name of the switch, click [next] and get the NISE error...

  "An error occurred so they were trying to access the devices PROJECTSWITCH. The primary error: unknown status code (Hex 0xBFFA400C).

  I see that a virtual device is created with no logical switch assigned. I get the error even if I try and add a logical switch manually to the virtual device NISE.

  Is it because the switch Board is not available for the system? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  Thank you

  Alan

  Alan.

  
  Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  This should be the expected behavior. NEITHER Switch Executive tries to communicate with the instrument before allowing you to configure routes to ensure that there is no problem that would affect the operation of the Switch Executive. In your case the pilot trying to communicate with a non-existent device.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  It is possible that all compatible IVI devices should have the ability to simulate.

  It seems that you have configured your session of IVI driver incorrectly for a simulated device. I try and make sure that in the session driver, under the 'Général' tab, select the drop down menu to "Simulate with" and select 'Specific driver' and then click 'Save the IVI Configuration'. This will return the Pickering driver selected in the 'software' tab and simulate a device. This should allow you to create a virtual device NI Switch Executive and develop and test the code on the simulated instruments.

  I would like to know if you have any other questions.

• X 220 and Mini Series 3 with USB 3.0

  Hello

  I am recently received a Mini Series 3 with USB 3.0 for my laptop company ThinkPad X 220 Windows 7 64 bit.

  However, after installation of the USB 3.0 driver downloaded from the Lenovo Web site, I still do not see USB 3.0 in my Device Manager device.

  I have also some test using an USB3.0 external HDD but the USB 3.0 port seems to have exactly the same speed as all the other ports.

  How can I activate USB3.0 on this Docking Station?

  Thank you

  Jeremy

  ThinkPad X 220 with i7 (i3 and i5 has usb 2.0 ports only) has a single USB 3.0 port, but the way it is connected through the motherboard, it is unable to support port additional usb 3.0 from the dock.

• HP all in one 6200 series ceased printing. Indicates the printer is not working online.

  After printing a document on my HP All in One 6200 series to my computer today, when I tried to print the following document, I got a signal to check color cartridge.  I checked it, ink was low, but I was not printing in color and black cartridge is full.  I pushed OK according to the directives and the signal is output, but then would not print my document.  It shows the printer works not online; However, the computer works online, and I was not able to solve this problem to find a solution.  Feedback would be appreciated.  My computer is Vista.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  The steps in this troubleshooting page may help as well.

• Brightness problem with aspire switch 10

  Hi all

  I have a gene with a switch screen aspire 10.
  The brightness level is constantly changing. It is not dependend on the ambient light, because I turned off Adaptive brightness. (When I put a flashlight on the light sensor that does nothing).

  For example: sometimes when I switch between the metro and the desktop mode. Notable stage screens turns a bit more or less clear. It also happens when you watch movies, opening programs, almost always when the image changes.

  Does anyone know a solution to this?

  Kind regards.

  To resolve this problem, I did this.

  On the desktop, right-click. Properties of the graph. Power. I turned off the screen of the energy saving technology.

  I hope this works for you also.

  

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Please do you intend to produce T series laptop with 15.6 display based on Sandy Bridge?

  Please tell me you intend to produce T series laptop with screen 15.6 inches based on Sandy Bridge processors? Please write soon. I await your response. Thanks in advance, you

  If you scroll down a little ways on www.Thinkpads.com, they say that the T420/T520 will be introduced in February.

• ISE 1.1.2 change of authorization with Avaya switches (5520)

  Hello

  I'm ise configuration to make the assessment of posture. I saw avaya my LAN and Core switches. The idea is once the user is authenticated using 802. 1 x, then it will be moved to qurantine vlan and after that it complies with the policy of the company then it will be moved to the vlan real. I have configured the switch avaya to accept the assigned vlan and also configured RADIUS authentication dynamic 802. 1 x. Currently, RADIUS assigned qurantine vlan works but once the nac scan agent and mark the status of compatible PC then the CoA is not the case, and user is not moved to the vlan real.

  I tested the same authorization of the ise policy to assign dynamically VLANS on switches cisco and it worked perfectly, but the same thing is not happening on avaya switch.

  Any idea on this?

  Kind regards

  Akhtar

  Akhtar,

  Posture with ISE flows have only been tested with Cisco switches:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/compatibility/ise_sdt.html

  The RFC says that port 3799 is for CoA, but due to a conflict, we use port 1700 so that my have something to do with it. That said we don't pretend to support 3rd party switches currently.  If you do not want to see this please contact your Cisco account team to check the status of the part 3 switch support or request the feature.

  -Jesse