PowerEdge 2970 dvd player driver

Similar Questions

• EliteBook 8540p - DVD player driver failed to install properly

  Hello

  I have not used my DVD player for some time. In the meantime, I upgraded my hard drive to SSD (using AHCI) and upgrading windows to win7 64bits (new installation, no upgrade).

  I'm not sure if the drive worked on the new facility, but today, I had to burn a CD and burning software cd has reported that it has no installed burner. I checked in Device Manager and I saw that the DVD player has a yellow icon next. Software driver update did not help.

  I also noticed that the IDE controller is not correctly installed. Software driver update did not help (I copied the original CD on MemoryStick OSB and tried to find the driver there too). But whenever I restart the computer it has a new name at random in front of IDE controller.

  There is also a problem even with virtual drives (Daemon tools).

  

  Hello Paul,

  I solved the problem by removing the filter 'higher' register, as described on this link.

  Best regards

  Darko

• Can Portege R700 - I change the DVD player with HARD drive?

  Is it possible somehow to put a HDD drive where the DVD player is in Portege R700-1CZ?
  Any help appreciated.

  As far as I know something like this is not possible and offers Toshiba HDD caddy for that doesn't.

• Connect USB hard drive to the SD2010KY DVD player

  Hi there Aussieland...

  * More about SD2010KY DVD player + * bought on a month back...

  Any kind dbo know the answer to:

  Could it be caused damage to run a USB connection external 3 1/2 "HD (160 g) - say a .avi movie - into the USB port on the front of the unit?

  That is to say, power supply of the unit will be responsible for the extra bit Ok?

  Or is this the wrong forum to ask this detail? :)

  Thank you - everything you need to know about would of course be appreciated...

  See you soon

  To be honest, it is Toshiba forum created for calculation problems.
  In any case, check the drive specification to see if the USB port has enough power for external HARD disk. I had old DVD player and I could only use USB keys.

  You can try to connect USB HDD to see if the drive will be recognized correctly. You won't damage anything.

• Ultrabook HP 4 t-1100 - hard drives defective - No. DVD player - made HP sells recovery USB flash drives?

  Hello

  I am repairing a laptop HP Touchsmart Ultrabook 4 t-1100 for a friend. The pc wouldn't start. BSOD, would try to repair itself, then BSOD again. I ran the hard drive from the bios test. He said that the hard drive has failed. I bought a new drive hard Western Digital 7mm Blue, replaced the wrong drive, has passed the test to drive hard and then asked my friend if she had the Windows 8 recovery disc or a flash supplied with the computer player.

  Apparently, the recovery discs are not included with Ultrabooks, nor are a recovery flash drive. Being that this computer has been for a schoolgirl teenager, given to him by his mother of the computer-illiterate, nor had the foresight to do a restore of backup USB flash drive. All Ultrabooks do not have a reader of CD/DVD/BLU, so a USB recovery "disk" is necessary.

  I don't have another computer to Windows 8 lying autour to make a USB recovery. Some people sell images of USB recovery on eBay, but they don't seem very good reputation.

  And apparently they do not put the product key of Windows 8 on the bottom of portable computers more either! HP offers to sell a "recovery disc" through their section of the support of their website, but it is obviously not a DVD player to put it in.

  Here's my quandry: If I buy the "recovery disk" HP, they will send me a DVD or a USB FlashDrive with a system image on it? And if they send me DVD, I'll be able to put it in a computer Windows 7 and make a bootable system image that then I could put it on a USB key? Then, Windows will automatically find the product key?

  Hello:

  When I click on the link below, I see an option to order a recovery media USB for this model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5328025

• My DVD - R drive is suddenly only recognized as a cd player, now what?

  I have problems with my sound does not work and did a restore of the system that it has cleared up. I don't know if this caused the problem with the dvd - r drive but later that day there, I noticed that I couldn't burn DVDs more. When I did some troubleshooting I realized that the computer recognizes the drive as a cd player now. What can I do? I don't have a disk for it. When I go into the material it says it's working properly and they call it a dvd - r drive. PBDS DVD +-RW DS-8W1P

  Hi lnwn,

  Check to see if the following is useful.

  Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

  Method 3: If you are not able to playback of the DVD, follow the below article mentioned.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• My DVD - RW Drive (drive E:\) Player disappears

  My DVD - RW Drive (drive E:\) Player disappears in my computer and so I can't read CDs. I already follow the methods specified by Microsoft. First of all, I try to remove the upperfilter and UpperFilter in regedit ( http://support.microsoft.com/kb/982116/en-us ). However, it is not UpperFilter in regedit for me to remove it. Help me.

  Hello

  -Have you tried to do a system restore?

  -Is a desktop PC or a laptop?

  -What happens when you press the eject button on the cd/dvd drive?

  This could also happen if there is some sort of virus on the computer that made the invisible device in Device Manager.

  So, I recommend you run a complete virus scan and audit system.

  Perform a full scan of service on your system.

  Step 1: Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For protection in real time, which helps you to protect your home or small office PC against viruses, spyware and other malicious software, download
  Microsoft Security Essentials.

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Step 2: Download and install Microsoft Security Essentials from the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials/download

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps.

• DVD player will not read is no longer drives

  Recently, I went for 2 weeks - when I left my computer was working and my dvd drive could read all my disks (mainly games)

  My return however (and after the installation of 18 updates last night) the bed DVD player is no longer just about any type of media disc (having already be able to read all). However, whenever I needed it for work, he did, I noticed that before I left my DVD player had played a bit and seems to be trying to read discs (making the noise of rotation).

  Anyone got any ideas on what this could be and a possible fix?

  (im running windows vista and the drive is a tsstcorp DVD + - RW TS - H653B ATA)

  Thanks in advance

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is there an easy way to identify the type of disk required by the optical drive in my computer? How to identify DVD + compared to a DVD player?

  At home, my wife and I have two computers four desktop computers and laptops.  I often bring the laptop I got from my employer to use when I travel or work at home. Is there an easy way to identify the type of optical drive required by the optical drive in a computer?  How to identify DVD + compared to a DVD player?  I have never the disk right when I need to burn something.  Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use

  The above should help you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  General information on CD burning.

  See you soon.

  Mick Murphy - Microsoft partner

• (Redirected) The laptop N4110 watch DVDs when inserted DVD player "cd dvd and driver recovery."

  Hello

  I have the dell N4110 laptop... It is updated to the window 10 are a few days... last night while dong some work my screen turns off... then I tried to restart my stem, but several attempts failed... then I try to recovery via recovery dvd but my system does not detect not them... After several unsuccessful attempts, I tried to start the system via the external dvd drive did not work again to USB key bootable recovery dvd... without success... Finally, I tried to install 7 for Windows prof... It is installed as a charge... now when I put my cd dvd driver recovery in the dvd player... He blank SIAS dvd... do not know what the problem is. Although dvd player reads other CDs and DVDs... Someone please help me go back to my original home premium Windows 7...

  Thanks in advance

  Hi alokgzp,

  Please repost this in the software and the operating system, Windows 10 forum help.

• DVD player does not recognize disk ERROR "Please insert a disc into drive F".

  Any disk I put in DVD Player my cell phone, he won't play. If I go to the file in Windows Explorer and click on DVD RW drive (f :)), it ejects all that is currently in the player, saying: "Please insert a disc into drive F:." My computer is a Lenovo 4334 of model and model number HuronRiver_CRB. It runs on Windows 7. Can anyone help?

  Try: https://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• How do I re - install my Photoshop CS3?  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.  How can I I re - install?

  How do I re - install my Photoshop CS3?

  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.

  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html