EliteBook 8540p - DVD player driver failed to install properly

Hello

I have not used my DVD player for some time. In the meantime, I upgraded my hard drive to SSD (using AHCI) and upgrading windows to win7 64bits (new installation, no upgrade).

I'm not sure if the drive worked on the new facility, but today, I had to burn a CD and burning software cd has reported that it has no installed burner. I checked in Device Manager and I saw that the DVD player has a yellow icon next. Software driver update did not help.

I also noticed that the IDE controller is not correctly installed. Software driver update did not help (I copied the original CD on MemoryStick OSB and tried to find the driver there too). But whenever I restart the computer it has a new name at random in front of IDE controller.

There is also a problem even with virtual drives (Daemon tools).

Hello Paul,

I solved the problem by removing the filter 'higher' register, as described on this link.

Best regards

Darko

Tags: Notebooks

Similar Questions

  • I have a new macbook pro and I didn't know that it is not a dvd player. Can I install my new photoshop elements 13 on my old laptop and then transfer the files to my new?

    I have a new macbook pro and I didn't know that it is not a dvd player. Can I install my new photoshop elements 13 on my old laptop and then transfer the files to my new? If this isn't the case, I can download the installer from somewhere?

    Hi Matt,

    Try products download Photoshop Elements | 10, 11, 12, 13

    Kind regards

    Sheena

  • I don't have a cd/dvd player, but want to install my photoshop elements 10 on my new MacBook.

    I don't have a cd/dvd player, but want to install my photoshop elements 10 on my new MacBook Air. I was wondering if there is a place to find the download link for the trial version of 10 so that I can then add my serial no and have it on my new computer. Any suggestions?

    This is easily one of the most popular queries on this forum.

    Try l http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm

    Very important instructions on this page first if the links don't work.

  • CD/DVD on Satellite U500 drive failed after installing Windows 10

    My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

    I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
    I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

    I'm about to give up the laptop but am wondering if anyone can help me?

    I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

    U500 is old piece of hardware and not supported for Win10, right?

    In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

  • DVD player broke, how can install windows 7

    I had to update my hard drive on my lap top and re - install Windows 7, but the DVD player is broken and won't install disk, are there other options I could try? As a download on a USB and then install from there - (I have the product key).

    Although you could certainly make a bootable USB flash drive if you have the correct DVD, you might as well buy a new DVD drive now... you'll probably want something else in the future.

    These are usually very easy to replace, and you can get a DVD player for most of the laptops for less than $30--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007589&IsNodeId=1&bop=And&ActiveSearchResult=True&SrchInDesc=laptop&PageSize=30&Page=1

  • EliteBook 8540p bluescreen - test memory failed

    Dear readers,

    My HP elitebook 8540p was serve me a long time, but recently, it displays a blue screen and resets after entering the windows password.

    Diagnosis at the start to say:

    Memory test: failed

    Failure ID: UOEDUC-56C77E-XD7U3G-40N603

    Product ID: WTO38ES #ABH

    Memory Module 2 low-Slot 1 (right)

    ----

    Forgive me if this is very obvious, but this means that the memory under the keyboard needs to be replaced, correct? I'm confused by the message saying "Module 2 low-Slot 1 (right)", I see only a card...

    If Yes, what is the best way to acquire a new memory (primary memory card) card?

    Thank you very much in advance

    Hello

    It seems that your memory card needs to be replaced:

    Please go to the Page from the HP Support

    http://h20566.www2.HP.com/portal/site/hpsc

    Enter the name of the product

    HP elitebook 8540p

    Click on the section of the manual

    Click on Service and maintenance information for the maintenance manual

    Service manual (page 68) provides instructions on how to replace the memory card.

    It also provides the spare HP part # you can order

    You can then use the following link to order the part

    http://PartSurfer.HP.com/search.aspx?type=prod&SearchText=WT038ES

    I hope this helps.

  • Motorola Atrix HD MTP driver fails to install

    Update my phone Motorola Atrix HD, tried to install the latest drivers from Motorola via their package install MotorolaDeviceManager_2.3.9.exe.

    Software appears to install correctly, but when I connect the phone, it shows the installation of drivers in the sandbox, but will appear then the MTP driver fails.  I have tried to uninstall the driver from Device Manager, where it shows device MTP with yellow triangle, restart, then install the drivers and then connect the phone again, same results, have tried several times.

    The driver in the device, shows the error 52 code Manager, which means it does not recognize the digital signature of the driver, but I know that it is a valid driver of Motorola, so what gives?

    Operating system is Windows 7 Pro 64 bit.  I read many forums and nothing seems to have this problem of fixing.  Any ideas would be appreciated.

    Thank you

    Hi Chris,

    A yellow exclamation mark next to a device in Device Manager means that Windows has identified a problem any with this device.

    The yellow question mark is displayed as the full size of the device icon and appears when a device is detected but not installed.

    Try the following methods and check.

    Method 1:

    I suggest you to run the Microsoft Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    If the problem persists, I you suggest to uninstall the drivers and software and then try to reinstall the same and check if it helps.

    Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    Hope that the information provided is useful.

  • C309a printer driver fails to install, the drive M: on Windows XP

    C309a printer driver tries to install my drive M: on Windows XP.  Automatic installation of HP fails because the M: drive is not valid.  What should I do?

    Hello ChappyD

    If the problem is not with the printer but the computer that you got with the Agency. It seems that he may have had only a M:\ drive on the computer before and default installation of this drive that is obviously not valid, windows tries more based on the list of drives you provided previously.

    At this point, the best solution would be to re - install Windows on the computer.

    However, before you reinstall Windows try the following:

    1. Open the command prompt
    2. type: 'subst M: C:\. "without the quotes and press to enter.
    3. Restart and try to reinstall again.

    SOURCE: Officejet Pro 8500 wireless Error Message Invalid drive F: /

  • Cannot print multiple copies from Excel. Also impossible to update HP driver. The update of the Microsoft HP driver fails to install.

    Windows 7 + Office 2007 with HP 1200 LaserJet printer: unable to print multiple copies of Excel documents.  Also impossible to install the update from the HP Microsoft driver.  Windows Update indicates the updated driver available... but fails to install.  Everything was stable and works very well.  All other printing works very well (including multiple copies from other programs like Adobe etc).

    Any help will be appreciated.

    Hi Rolloutman,

    ·        What happens when you try to perform multiple copies of Word?

    1. to narrow down on the issue, I suggest you to print several copies of a Word document or notepad.

    2. provide the error message or error code for the problem to install the updated driver, follow these steps:

    i. Click Start, in the search box, type in update

    II. click on windows Update

    III. click view update history

    IV. double-click Update failed

    3. update the printer driver to manually. Steps to update the driver:

    i. click on start, type devmgmt.msc and then on enter.

    II. develop the printer and right click on the sub element and click on update driver.

    Link for reference:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also check out the link below:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29790&locale=en_US&taskId=135&prodSeriesId=29789&prodTypeId=18972

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • The CD-ROM/DVD-ROM driver failed to initialize

    Keeps my CD/DVD-ROM driver not boot on the market.  Device Manager, says the driver is there, but it does boot, where will not read or write.  It's on an eMachines T3642 that came with Vista Home Premium.  The supplied operating system CD is available but not (obviously) read.  Help me not sysem restore... first restore point is September 22, 2009 and several dates different restoration do not help.

    eMachines support provides no answers on products out of warranty.  This set was purchased in January 2008, has worked very well with several old and a few new programs and material added since then.

    According to the diagnosis of Vista via the Device Manager, the failure of the pilot gave 37 error code.  The driver date is 21/06/2006, version 6.0.6002.18005,.

    Quandry: SOMETHING again loaded in via CD-ROM cannot load because the drive can't read it.     :-(
    The diagnosis of MS an available (on another window) will not download. (?)

    Color me irritated and frustrated (not a good fashion these days).  Help, please.

    Sincerely, Len Anderson

    Hello AF6AY,

    Have you tried to uninstall the dvd via the Device Manager drive then restart PC to see if Windows reinstalls? You can do it. If the problem is still there, can give a try? It is a quick easy fix from Microsoft, here is the link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer before you make this correction. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be a bad optical drive. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • audio driver fails to install on xp 64-bit

    "Hello, I have a"HP Compaq dc5850 Small Form Factor PC (ENERGY STAR) 
    Serial number: [personal information] 
    Product number: AM500AW

    I installed windows xp 64-bit with service pack and I downloaded the audio drivers hd adi xp/2000 on the site of hp but when I try to install the audio driver, I get a message from xp saying the audio driver does not and no audio codec is installed, how can I fix that I don't think not that hp has 64-bit xp to download drivers , I use the vista 64 bit drivers please help thank you

    The Microsoft UAA for Windows XP 64-bit driver must be installed before installing the audio codec.

    This is a place for the audio codec.

    Post your results here in your thread.

    Best regards
    ERICO

  • Unrecognized CD/DVD player - 1VO Equium A200 - installed device driver

    Hello

    My CD/DVD driver has suddenly stopped working. Although it says that the driver is installed and up to date, I can't make it work. If I look at the properties of the device, he said

    + Windows cannot load the driver for this hardware device. The driver may be corrupted or missing (Code 39). I was unable to find a solution so far.

    No idea what is wrong and how to fix it?

    Thank you
    Wendy

    If the drive is not listed in Device Manager, you need to solve it remove the filters from the registry. Simply follow the instructions given by Akuma.

  • HP Envy I7 15 "Notebook PC - last updated Intel for the HD graphics driver fails to install

    My PC has tried to install the driver update today, and two attempts failed after installation. There is no diagnostic messages, only the X on the last stage to indicate a failure. The HP support assistant continues to show the driver needing an update. Any ideas how to fix the driver update problem? Thank you in advance.

    Credentials of PC: Windows 8.1, product number C8P48AV

    What is trying to update: SoftPaq SP630750, Version 10.18.10.3304

    Hi Vdolcourt,

    Yes, I would recommend to do this. But make sure that you uninstall the driver first. Here is the download at HP.

    I hope this helps.

    Thank you.

  • IDE - CD R/RW 48xC CD/DVD-ROM drive plays not install DVD?

    I have a PC Compaq Presario SR12nx I bought a Microsoft Office pro 3 pack more 2010 to install on my computer but my drive does not read so I can't install it on my computer, I never tried to use my IDE - CD R/RW 48xC CD/DVD-ROM DVD drive, but it should run them right? or am I just read it wrong, I tried to update the drivers, but this does not seem to help any.  Any responses would be appreciated!

    Hello

    1. are you able to read another CD or DVD?
    2. do you get an error message?

    Try to run the fix it tool to the article below and check.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    See also:
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
    http://support.Microsoft.com/kb/321641

  • MTP USB device driver failed to install - Galaxy S4 and LG G3 phones.

    Original title: ver7 device driver instalation windows error when you try to connect smart phones mini Galaxy S4 and LG G3? Any help please

    I updated my system several times and its updates automatic out but I can't post of ASRock ion 330 in interface with my smart phones. My windiws has a rateing of 3.4 access experience.  For the mini Galaxy S4, I downloaded Kies\3 and original Kies both refuse to go beyond the connection at your stage deviece of the program before left im watching a dog spinning graphic and nothing happens and im left the peripheral USB MTP dryer failefk message to install.  I get the same message for my LG G3 too and ive no special software for this deviece istalled.  If someone has a way to work around this problem, I would be forever in dept here otherwise I will be cursed to tear my phone to transfer all the data on my hard drive laptop forever through a box of chip transfer of data via the USB port. Thank you.

    Hello Dean,

    I understand the inconvenience caused to you. I will certainly help you in this matter.

    As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

    Let me ask you;

    1. This already worked for you on this machine?
    2. You did any hardware/software changes to your computer before the show?

    Before you continue troubleshooting, please disconnect all external devices (printers, scanner, USB (Universal Serial Bus) drives, etc.) except the keyboard and mouse and then start.

    Follow the steps below and check.

    Method 1: Run the hardware and devices troubleshooter.

    The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

    Open the hardware and devices Troubleshooter

    If the problem persists, follow method 2.

    Method 2: Uninstall and reinstall all USB controllers.

    To remove and reinstall all USB controllers, follow these steps:

    1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
    2. Click the hardware tab.
    3. Click the Device Manager button.
    4. Expand Bus USB controllers.
    5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    6. Restart the computer and reinstall the USB controllers.
    7. Plug in the removable USB storage device and test to make sure that the problem is solved.

    Method 3:

    Check this resolution provided by stolagt on April 26, 2014.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Samsung-Galaxy-S4-MTP-device-driver-wont-install/d2d011f8-d776-488e-B2F7-3eaf00c1031a

    Let us know if you need more assistance. We will be happy to help you.

    ____________________

    Thank you best regards &,.

    Isha Soni

Maybe you are looking for