Powers of laptop on but Vista doesn't come not after I tried to use the restore point?

Similar Questions

• Laptop Sony vaio computer camera works does not after having tried most of the things!

  have a computer laptop vaio from Sony and the camera does not work. I did most of the things apart to take apart!

  It has the standard driver that I uninstalled and reinstalled again.

  I don't have a arcsoft webcam program that many people say is contributing to this problem.

  Operating system is Windows 7.

  You can also try uninstalling and reinstalling the driver for the webcam in compatibility mode, if you have not already done.

  Here are the steps:

  1. Download the latest drivers from the site of VIOS of technical support.
  2. Press the Windows key + R, then on "devmgmt.msc".
  3. Go to webcam driver, then right-click on it.
  4. Click Properties and click the Uninstall tab.
  5. Click OK.
  6. Re install the latest driver in compatibility mode.
  • Right-click on the downloaded driver.
  • Click Properties , and then select the compatibility tab.
  • Click the check box next to "run this program in compatibility mode for: '.
  • Choose the option of Windows 7 on the menu drop-down.
  • Click "Run this program as an administrator".
  • Click apply and then click OK.

  If it persists, you may need to contact your computer manufacturer for help with your concern.

  Thank you.

• Windows 10 install doesn't work not after reboot (works fine until the PC is rebooted).

  It's bad enough. Upgrade to windows 10. Wanted to ensure that I started with a clean slate, so I have uninstalled FireFox, and then use the new edge of Windows browser to download the latest version of FireFox.

  He moved very well, remembers my bookmarks and settings, etc. Everything seems fine.

  But after a system restart, the FireFox icon on the desktop and the taskbar are just blank page icon, and when you try to run the program it says it cannot be found, or that I don't have permission to run it.

  Let's not get too hung up on how the bad error message is (go, Windows, who is?), the problem is that a program that worked very well until I rebooted now is not found or all of a sudden, I don't have permission to run it?

  The problem is if I try to boot from the desktop shortcut or if I go directly into C:\Program Files (x 86) \Mozilla Firefox and double-click on Firefox.exe.

  I tried the things:

  1. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that it was reported as a program that had been downloaded on the Internet and could be 'blocked '. So I checked the 'Unlock' button Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  2. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that there are two weird entries 'unknown user' in the settings of security with a sort of GUID. I removed those two. Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  3. do you have an uninstall, and then run the installer as administrator (after making the above changes). Everything is fine. Restart - same problem.

  I'm out of ideas.

  A diagnosis by a Microsoft technician during a support chat session!

  If you want to do a clean install of FireFox on your Windows machine after upgrading to Windows 10, but you had FireFox installed on Windows 7 or Windows 8 before the upgrade, you must uninstall the TWO FireFox and install the service of Maintenance of Mozilla before performing cleaning.

  If you uninstall FireFox but not the service of Maintenance of Mozilla, you will get the squirrels I described, where FireFox stops working after a reboot or a disconnection / connection.

  I think this is related to the BS that Microsoft introduced with Windows 10 where, after installing FIreFox, if you click on the button that says that you want FireFox to be your default browser is not only to persist this setting directly. Need you to the configuration screen of Windows 10 for default programs, which is not at all intuitive, especially those based on past behavior.

  I think that FireFox should put an explanatory text (on the page where you click on the button to make FireFox the default browser) which explains what Microsoft is up to.

  plan to install FireFox on Windows 10 machine

• URGENT... BUG in scrolling doesn't work not as expected when you use the navigation

  Hello

  I created this site for a client. He was literally works fine an hour ago. I just went to the post, and now when I use navigation, all my images, go to the left, even though I put them to fill.

  What could possibly get there? I'm supposed to show them this site tomorrow and now I can't. If you have any ideas, let me know.

  NOTE that this only happens when I use navigation. If I scroll it works. It is, however, very nervous.

  Home

  and here is the file:

  Dropbox - MicrositeRedesign02.zip

  Thank you

  Dave

  This behavior is caused by the white dots on the right side of the page master, forcing the content area (and thus the scroll in the browser area) is much wider than what you want.

  

• SFC wants SP2 disk to repair, but I'm at SP3. Is this OK to use the disk?

  Hello

  When I do "sfc/scannow" I get the following message "Windows - files required for Windows File Protection is running properly have been replaced by unrecognized versions." To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition Service Pack 2 CD now".

  I had to upgrade to Service Pack 3 to install MSE. As I understand it, once you have installed SP3, you can't restore the system to SP2. I just want someone to confirm that I really should put the Service Pack 2 CD.

  Thank you!

  Lol you should not put the SP2 CD.

  I don "t know if you can to SP2 or not since I've never used the restoration of the system (except practice), but which would have been, you can Uninstall SP3 if you want, but you will lose all the features and benefits of the version of the Service Pack 3 + year, System Restore.

  Now that your question is confirmed, what can you do about it?

  Once you install SP3, all installation XP CD you have with older SPs are practically useless for sfc/scannow (by themselves).

  The best option is that if you have a real XP bootable installation CD with a plu SP is to make a new installation CD that has SP3 'slipstreamed' into it, so what comes out the other end is a new installation of XP you create that will be integrated into SP3.  You must already have a genuine XP bootable installation CD to do this.

  What you end up with is a XP installation CD with SP3 integrated into it (and you can book your old version).  Which will make happy sfc/scannow, sfc/scannow is not for fixing problems on a system.  sfc/scannow is designed to run only once when you install XP to populate the folder dllcache with a list of 3498 system protected files which are backups in the case where a protected file come missing later on your system.  That's what all this.  It is not to solve problems, unless your problem is that your dllcache folder must be updated, or your problem is you have too much time and need to lose some of them.

  While it gives a good "feeling" when sfc/scannow to runs without complaining (and you can make sure), it is unlikely address any questions you may have and are a great, frustrating waste of time (as you can see) - unless your question is trying to get the sfc/scannow to run without complaining.

  If you run sfc/scannow to completion and you have all the pieces in place, it should find nothing to do.

  However, even if you break your system on purpose and sfc/scannow is a file in the dllcache folder that needs to be replaced and replace it (it IS what it is), you will know about it since the only thing that you will see where the Observer newspaper is the following:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  Even if sfc/scannow finds something to do, you will never know about it.  It is not his goal.  Its purpose is to populate the dllcache folder.  In the above example, sfc/scannow replaced 2 files that I've damaged on purpose for a mission of training and test, but you won't see anything about it in the newspaper.

  That's why running sfc/scannow again more than a waste of time.  If he finds something to do, you don't know yet what he did.

  If you don't have a genuine XP bootable installation CD, hope is not lost, but I'll let Microsoft support engineers who are hired by Microsoft experts help you with this part.  I do not think that the Department of Education will tell you about "slipstreaming" either because they probably don't know how and there is no KB article for their link, in their response.

  Here is a recent example of the MSE ineptitude and lack of understanding of the sfc/scannow (soon to be marked as the answer):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/sfcosdll-missing/4836955e-4517-45A8-a19f-85d7d5ecf3f5

  I have several times also offer my professional services to teach Microsoft how sfc/scannow technical support engineers work in the hope that they will not be there when they have no idea what is the problem with a system or how to fix it.

  Sorry...  I had to get that last shot - again.

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• I have windows vista and I had to use my recovery disk, but an error came as it ended. I tried to use the menu options of recovery but now she plays as if I had no drivers. What should I do?

  I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

  Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
  repair disk problems, it does not really create them.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• Unable to change the base installation of Windows Vista Edition language family by using the restore Vista DVD

  I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.

  When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.

  Thank you

  Hello

  You will need to contact Fujitsu about this.

  You cannot change languages with Vista Ultimate and Enterprise.

  You can have a different result if you try reinstalling using this method.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox

  On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
  Firefox cannot renew its tabs and now won't run and let me do a backup

  This may be considered to be solve my problem.
  I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
  Thank you for all your help and advice.

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• Vista Home Premium - cannot create a system - error (0 x 81000101) Restore Point

  I found the thread ""Microsoft Answers > Forums Home > Windows Vista > Security and privacy > Vista Ultimate - can't Create System Restore Point - error 0x800423F "and tried to follow the instructions for a similar problem but unfortunately I knew no chance to solve."

  After picking up my operating system (and emotional stability) after some type of registry startup problem (I think by installing automatic updates of Windows or trying in vain to remove a beta version of Windows Live Essentials caused), I am now unable to create system restore points.

  Not sure if it is a side effect of my previous diagnosis reboot-a-thon, defragment my HARD drive, disk cleanup running, karma for wanting to change the unwanted services from "Automatic" to "Manual", the result of a record of the ugly or another random event.

  When I try to create a restore point, I get the Protection system pop-up dialog (which seems even to have its own sound): "the restore point could not be created for the following reason: the creation of a shadow copy has expired.". Try this operation again. (0 x 81000101) Please try again. »

  I kinda like the syntax of phrase yoda "Retry this operation" but worried that system restore does not work.

  Specifications:
  ~ IQ818A HP
  ~ Windows Vista Edition Home Premium
  ~ Service Pack 1
  ~ 4 GB OF RAM
  ~ 64-bit
  ~ Properties system has already show "HP (c :)) (System))" as being selected for "automatic restore points" with the "most recent restore point" being yesterday.
  ~ (C) a 331GB of free space and 123 GB of unused space
  ~ (D) is the "FACTORY_IMAGE" of (c) partition and was selected previously, but then I tried to deselected it.
  ~ "Volume Shadow Copy" has been classified as "Started" and "Automatic" in the Services; I changed it to manual.
  ~ "Virtual disk" is listed as "manual" in Services.
  ~ Is CPU utilization to 99% with svchost.exe taskmgr.exe 31% and 49%
  ~ avast! The antivirus is active
  ~ avast! Scanner shows no viruses or other problems
  ~ Spybot scan shows no virus or other problems

  I disabled later, restoration of the system, rebooted, enabled the restoration of the system, restarted and then tried to save a point of restoration but no luck, I received the same error (0 x 81000101) as before. I then typed "net stop vss ' disabled shadow copies of volume storage in Device Manager, rebooted and activated the system restore and then tried to «Create a system restore point...» "once again, but nothing helped.

  I even removed the SD card that housed my ReadyBoost, just in case where that was having some strange side effects.

  I then ran sfc/scannow and must "checks 100% complete." but has NOT gotten any other report (for example "Windows Resource Protection did not any violation of the integrity." as stated on another computer to test I ran the same command on). I followed the link http://support.microsoft.com/kb/929833 and tried opening sfcdetails.txt but it was empty; Perhaps, the command still runs on my computer that seems to use a lot of CPU?

  After reading a bit more about the problem (http://support.microsoft.com/default.aspx/kb/826936 for Windows Server) and think about the recent very slow performance of some applications of system on my TouchSmart, I start to think that my previous tinkering with services caused something to load that should not or something not to load that should and therefore the computer does not have enough juice or is not properly configured to create a restore point. Do you think that this is the problem? Is there somewhere I can find a list of services by default OEM on the parameters (deferred), manual or automatic?

  Any suggestions would be greatly appreciated!

  Thank you.

  Hi TouchSydney,

  After you disable and re-enable the system restore, you did a restart? This removed all your restore points?

  If this isn't the case, you might want to restore it to a date before all this happened, he probably still will give the error.  Disable and re-enable system restore to remove all restore points.  Restart and try to create restore points.

  You can also restore this way cleaning points:
  http://windowshelp.Microsoft.com/Windows/en-us/help/36cefd1c-0fbb-738b-2274-4098b15384fb1033.mspx

  In addition, let the VSS service to automatic and change the Options on the tab recovery to restart the Service in case of failure.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration.

  had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration. nothing seems to be the case so I cancelled the operation. Now, I can not reinstall or uninstall for the program is open. Help!

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.  Good luck.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani