PPPoE Configuration for DSL Speedstream Siemens 4100 b modem

Similar Questions

• Router Cisco 1801 for PPPoE Configuration

  Hello

  We have 1801 router and you want to configure for PPPoE.As our ISP provided ADSL connection with the following parameters:

  Encapsulation: PPPoE

  Multiplexing: LLC based

  VPI = 0

  VCI = 103

  Login = xxxxx

  Password = xxxxx

  IP: Dynamically by ISP

  I'm new to configure cisco router. Please say we follow the steps in 1801 for above configuration cisco router configuration.

  Hey Hamza Rahab,

  Thank you! Please add the following to your configuration after replacing the your_login and votre_mot_de_passe with your real ISP credentials (enter the first configuration mode using the commands Activate and Configure terminal ):

  ip routing
  ip cef
  interface atm0
  no shutdown
  pvc 0/103
  pppoe-client dial-pool-number 1
  interface dialer0
  dialer pool 1
  encapsulation ppp
  ppp pap sent-username YOUR_LOGIN password YOUR_PASSWORD
  ppp chap hostname YOUR_LOGIN
  ppp chap password YOUR_PASSWORD
  ppp ipcp dns request accept
  ip address negotiated
  ip nat outside
  ip mtu 1492
  ip tcp adjust-mss 1452
  interface vlan1
  ip address 192.168.1.1 255.255.255.0
  ip nat inside
  no shutdown
  ip access-list standard NAT
  
  permit 192.168.1.0 0.0.0.255
  ip nat inside source list NAT interface dialer0 overload
  ip route 0.0.0.0 0.0.0.0 dialer0
  ip dhcp excluded-address 192.168.1.1 192.168.1.10
  ip dhcp pool LAN
  network 192.168.1.0 /24
  default-router 192.168.1.1
  import all
  

  This configuration should

  1. connect to your ISP by using the login and password you were assigned (replace the your_login and votre_mot_de_passe with your real credentials for the ISP connection)
  2. begin to assign addresses to the network 192.168.1.0/24 IP LAN clients, starting with 192.168.1.11
  3. perform address translation network needed to allow access to the internet

  Please try and let me know if it worked. Thank you!

  Best regards

  Peter

• Configuration for E4200 suggestions

  I just bought a refurbed E4200 and run the configuration wizard.  It works fine but I know there are always better configurations and settings.

  I'm out of the static IP for my devices, but don't know enough about this router beyond that.

  I have an XBOX with XBOX LIVE, PS3 PlayStation Network, but also a gaming PC.  They are all wired.

  Wireless, we have a few desktop computers and laptops.

  My previous router was a D - Link DGL 4500 and it was a great router, but has not had the MIMO or punch wireless that it is.  I really like this E4200.  Anyway, the DGL4500 forum was the best stickies, I have ever seen regarding the configuration for the games.  Does anyone know of another forum that may have a similar one sticky for configuration or can someone suggest what works for them?

  "Tweaks" are generally to solve gambling problems. I don't really think tweaking everything that would make a real difference for you. Just don't use Qos on the router again because it does not correctly detect the speed upload and Linksys leans on this.

  If you have a DSL modem, then put it in Bridge mode and use the PPPoE rather than DHCP in the router Web page. If you have cable or fiber then I would think UPnP would be the only thing needed to enjoy the game smoothly.

  If you are having problems then that is when port forwarding/triggering, dmz, etc. come into play. Another that I have not really seen all the articles on how to optimize the gameplay. Having enough bandwidth in combination with low jitter and latency is what counts. Maybe when they solve Qos problem, then you can try it if you have problems of upstream bandwidth.

  Also make sure you have the latest firmware. Here (v1.0.02). I was checking the Dlink forums and all they did was open (done automatically UPnP) ports and prioritize the traffic (Qos). But as I said, do not use until Linksys Qos solves the problem because it will considerably cut down your download speed.

• Internet configuration for windows media player

  When I try to play a song that I bought some time ago in WMP version 11 running on the operating system to Vista SP2, in the lower right corner, it says «Download rights of use...» "Then I get a pop up window that says:"Windows media player is not configured for the internet.

  "To connect to the internet, run the Internet Connection Wizard, and then try again"

  How can I find the Internet Connection Wizard? I am already connected to the internet DSL. I don't have the registry key to change the binary data, so I am lost on what to do.

  Thank you in advance for any help that anyone can give me.

  Steve

  Hi Steve915,

  Try the following steps.

  Step 1

  Disable firewall, you restart the computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Turn on the firewall and restart your computer.

  Step 2

  Run the internet connection wizard.

  1. Open internet Explorer > > options Internet Tools

  2 click on the connections tab, then click on the configuration tab.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• No writable calendars are configured for invitations

  A few weeks ago I created the lightning (with the great help of the participants to the forum of TB) so that when I get an e-mail meeting invitations, I could accept, and they show up on my Google Calendar. A week ago, it stopped working.

  When I receive an invitation, there is no button to accept. Instead, there is a notice that says "no writable calendars are configured for invitations, check the properties of calendar.

  I made sure that Google calendar is present and selected in the tab of the Flash. I checked the calendar properties, and the email address where I receive invitations to meetings (my work email) is set as the e-mail address in the Properties dialog box. And the checkbox is enabled to turn on the calendar.

  Thanks in advance, does anyone have suggestions to get TB/Lightning to work as it did before? That is to be accepted invitations to meetings and automatically add them to my calendar?

  Thank you!

  Well, you can then mark your message as 'Solution' for the topic?
  Thank you.

• Despite my Gmail that is configured for IMAP and continually confirming that my login and my password are correct, that it will not find my account

  My e-mail and password are correct when I try to configure my mail in Thunderbird, but I always get the error message: Thunderbird could not find your e-mail account settings.

  I have also entered with Gmail and was assured that it is configured for IMAP

  Thank you.

• SP A10 - Error 633: the modem is not installed or configured for Dial-Up

  I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
  Either way, it's a satellite pro A10

  Hello

  If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.

  The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
  Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
  If there is no success please write again.

  Good bye

• Re: Brooded and configuration for Touchpad

  Win7 x 64
  L505 - 10 M

  It dishes all kinds of problems after an update of security windows for this system a few months ago.

  I put a backup of C:\ return, but various functions did not work.
  I have most of them are still working today. I installed Flashcard again but configuration for touch pad and display are still missing.
  Mouse drivers are HID-mouse PS/2 version: 6.1.7600.16385 Microsoft.
  I downloaded path touch driver - 20091202155841.zip, but it cannot be installed.
  C: \Program Line\TOSHIBA\Bulletin Council is present but likely damaged and not present in Windows Start-menu\Toshiba.
  How can I fix this?

  arnold12

  It is pretty damn good on your laptop.
  Is installation of recovery for you solution?

  I mean, after the new installation of the OS, everything will be OK again.

  All you need to do is to backup all your data and start the installation of the HARD disk.

• Hi, I just bought the Dm11 rhythms... How can I configure for use in Garageband?

  Hi, I just bought Dm11 drum machine apple app, how do I configure for use in Garageband?

  I guess you mean the Mac Version of DM1. The App is not closely integrated with GarageBand. Therefore, you must export each loop/beat you like WAV or AAC and import it in GarageBand.

• Where the smart wizard dowload can configure for OSX (El Capitan)

  Can you tell me where to download smart Assistant can configure for Macintosh OSX?

  Hello DaDirk,

  Welcome to the community!

  I'm sorry, but currently there is no Smart Wizard, Smart Control Center and Prosafe Plus utilities available that are compatible with Mac systems.

  Alternatively, you can configure the switch via user interface using its default LAN IP address on a web browser.

  Kind regards

• Where can I find instructions for alternative configurations for my time capsule?

  I am resident in a House with a router not apple using Uverse.  I just bought a Time Capsule, hoping to use it as a storage drive to backup my imac and mac air.  For the MacAir, I would be like it is able with time Capsule wireless backup, and depending on how I can configure the system, connect the imac directly to the TimeCapsule or wireless connection.

  What I can't do connect the Capsule of time with an ethernet cable to the router not apple, that is in a different room than my desktop.  I have permission to use the internet service provided by the non-apple router - so right now, I don't have time Capsule to provide internet access in itself - as long as it can enable to backup wireless option at least for my mac air.

  Any suggestions?

  Unfortunately, you're stuck in the middle of a router that is not apple and an Apple router without ethernet... and therefore no way to connect.

  What you need is a wireless bridge (wireless to ethernet bridge if you want that it is more accurate).

  Wireless bridges are pretty cheap... Look at TP-Link, because a lot of their wireless access points will make wireless bridge...

  Or you can purchase an airport express... It's the only apple router which allows the wireless bridge. However, it is more than twice the price of an equivalent of non-apple.

  With the bridge... you plug in ethernet on the TC and run the TC in bridge (it is the router bridge)... your clients can then connect to the TC directly and the two backup and get internet at the same time... otherwise you can do it in the order...

  That is, you can plug the TC to the iMac by ethernet. It's a bit complicated, but I've given instructions here. Then you have wireless internet and backup on ethernet... It is indeed the best configuration for the imac.

  Time Capsule using wired for Mac for backup only.

  What you can't do, is use wireless for internet and backup at the same time... you will need to do one and then sometimes switch for the wireless of TC to run a backup... not a great idea.

• HP Pavilion p7-1240: desktop will be falling asleep and wake up, and then on its own since configuration for Windows 10

  Desktop has been configured for 10 Windows Home Premium and works very well.  However, a slight annoyance is whenever I put the machine to sleep, he wakes up in the minute each time.  So I do not use 'sleep' and turn every time that I'm done using it.

  However, I prefer to sleep until needed again.

  Already used administrator command prompt: powercfg /requests to check for power to the sleep problem issues and nothing appeared on the command line.

  Already tried disabling hybrid sleep - no help

  Already turned off all timers wake - no help

  Already changed the power of sleep settings using adapters - no network

  Any help you could give me would be much appreciated. !

  Hi there @Berndtoro,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the computer wake up sleep mode. I'll be happy to help you.

  You've done most of the things I want.  I see that you posted on the malware, which may be what wakes up the computer. Please follow the step of Troubleshooting sleep and hibernate issues (Windows 7).

  Please keep me informed of the progress of things. If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• I can open Office configured for text to speech in Windows XP?

  Original title: Windows XP Pro

  I have Windows Xp, I can open Office configured for speech synthesis

  Support for OpenOffice is here--> http://www.openoffice.org/support/index.html

  And see--> https://forum.openoffice.org/en/forum/viewtopic.php?t=47332

  And--> http://support.microsoft.com/kb/306902

• PIXMA PRO 10 can not configure for WiFi

  Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

  MP68-victory-mg3200-1_02 - ejs.exe

  but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

  Hi, Jim!

  Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

  Thank you and have a great day!