Precision M6600 / Nvidia 4000 M / Port replicator / 2 monitors

Similar Questions

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Precision 7510 outputs to a single monitor through E-Port Plus Advanced Port Replicator

  Someone had problems with accuracy 7510 output only via an exit DisplayPort on the E-Port Plus Replicator of Advanced Port?

  Our Organization has recently begun to introduce units of precision 7510 to our employees, and we see that they only will be one monitor connected via DisplayPort through the Advanced E-Port Plus Replicator of Port - even if there are two monitors connected on both outputs DisplayPort on the E-Port Plus the Apr. If the monitors are connected via DVI, 7510 accuracy is able to output to both of them through the E-Port Plus the Apr.

  We tried M4800, E7450 processor and controller Latitude and Latitude E7470 precision devices in these E-Port Plus with two monitors connected on both outputs DisplayPort - and they all work properly.

  7510 precision units have video cards NVIDIA Quadro M1000M and the E-Port Plus APR is connected to either a pair of monitors P2417 or a pair of U2414 monitors.

  Disable Switchable Graphics in the BIOS. This should solve your problem.

• Microsoft Natural ergonomic 4000 keyboard don't work via KVM / port replicator

  I currently have a keyboard, mouse, two monitors and speakers attached to a KVM / port replicator that allows me to easily switch between a desktop and laptop.  I recently bought a Microsoft Natural ergonomic 4000 keyboard.  When it is plugged directly into the office, the keyboard works fine, but when connected by the KVM / Replicator port, it is not recognized and does not work.  I did bother to try it with the laptop but, given that I don't keep it if it won't work with my desktop configuration.

  All the drivers for the keyboard are loaded on the PC (Win7).

  What gives?  Any ideas?  I don't want to trash, but will be in the blink of an eye (more will probably say something not nice about material that is not work and play well with-the others on a review).

  Thanks in advance for your suggestions.

  Hello

  Please keep us informed of the issue and I appreciate your efforts to resolve the issue.

  I suggest you to update the latest drivers for the KVM.

  Click on the links below and download the latest drivers.

  http://www.IOGEAR.com/product/GCS932U/

  http://www.IOGEAR.com/support/DM/driver/GCS932UB

  Steps to download drivers.

  1. Select the model number (GCS932UB) of the KVW
  2. Select the driver for the GCS932UB
  3. click on download

  Try to download the latest drivers and check if that helps. Let us know the results, we will be happy to help you further.

  Thank you

• Dell Precision M6600 - two monitors

  I have a laptop Dell Precision M6600.  I would like to connect up to two external monitors and do not use the laptop monitor (so the lid will be closed).  There is only a single VBA port at the back, so I can't connect two monitors to it directly.

  I did research on the internet and find that it looks like this can be done by using a Port Replicator, but it seems that those who run more than $200, and I think I would have a hard time getting my company to approve that.  Is it possible that this can be done using a kind of dispatcher (VBA-> 2 x VGA Splitter, or using the HDMI port)?

  I found some discussions about it on the internet, but some speak only to duplicate the single to multiple monitors output, which is not what I want.  Many of these items were laptop specific, so I don't know how that would apply to my specific model.  So I thought that the best place to ask would be the Dell support site.

  Thank you

  Hi JoeLBS,

  Thanks for your question. DisplayPort is another standard to connect screens. Here's more about it: http://en.wikipedia.org/wiki/DisplayPort

  A DisplayPort to VGA adapter will work for you that should a HDMI to VGA. Here is an example:

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us&l=en&s=DHS&CS=19&SKU=470-AANJ&St=PLA&DGC=St&CID=262077&lid=4742363&ACD=1230980731501410

  Would be happy to hear from you on the result of your choice.

• Tecra A9 - connection of two external monitors using Express Port Replicator

  Hello

  I have a Tecra A9 and Express Port Replicator.
  I'm trying to connect 2 external displays, one connected to the output of the laptop and the other connected to the docking station (notebook lid closed, do not use the laptop screen).

  I can't get to work, anyone know if this is possible?

  Hello

  I think you want to connect a VGA monitor and the other to DVI port.
  Is this good?

  Well, I found this doc:
  http://APS2.toshiba-tro.de/KB0/TSB7B0201000CR01.htm

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
  If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

• Reference number for the Port Replicator for Toshiba Tecra A10 - 11I necessary

  Hello

  I hope my question short and precise to get a short response and precise.

  To search for the product mentioned on the Internet, I would need the model number Toshiba Replicator port for Tecra A10 - 11I. I am sure that such a product is, I think I saw somewhere.

  Thank you

  bwprius

  Hello

  I think you could use the Express Port Replicator Docking Station PA3508E-1PRP

  It should be compatible with the Tecra A10 series.

  Search in google for this part number and you should find some nice offers

• Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

  The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

  is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

  This port replicator is designed for latest Tecra and Portege laptop models.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Tecra A9 does support DVI-port replicator Express

  Hello

  does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator?

  The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor quality (interference).

  My colleagues all have the same problem. We use different samsung TFT; the operating system is Win XP Pro.
  The manual also says "..." Maybe some DVI monitors can be used... "but before testing the other monitors, it would be interesting if there is no DVI at all...

  Thanks for your help!
  Daniel

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the Port Replicator Port Express is * supported only on computers with graphics card ATI or nVidia *.

  If you have a DVI INTEL graphics card port on the on the Port Replicator Port Express is * DO NOT supported *.

  Best regards

• The PA3508E-1PRP Port Replicator supports wide screen resolutions?

  Hi all

  I think to buy a Tecra M9 - 14 FT 7800 (with the NVIDIA Quadro NVS 130 M - 128 MB graphics card) - will, in combination with the Replicator to ports Express PA3508E-1PRP let me fully to use an external monitor with a resolution widescreen native 1680 x 1050 over DVI?

  Thanks in advance,

  Ben.

  Hello Ben

  Unfortunately I can't give you the exact answer, but I'm a bit skeptical about it. As much as I know Port Replicatior has no influence on the signal because the signal from the laptop will just looped through. The question is what resolutions on external screen will be supported by the graphics card for s laptop.

  IN the document s user Tecra M9 manuals I found track information: as the operation of the port of all monitors DVI (Digital Video Interface) could not be confirmed, some matte DVI monitors will not work correctly.

  In any case, as far as I know as Tecra M9 comes with Intel 965 GM graphics card and we're working on how to get the resolution widescreen 1680 x 1050 on external display.

  If you need help with this please write again.

  Good bye

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Latitude E6430 Port Replicator not detect digital displays during startup

  Hello

  I have two new Dell E6430, both have the same problem. When the laptop is connected, the lid closed and under tension, no monitor active. Only when I power off, then open the lid of the laptop and power on I see the start of the cycle on the laptop screen, it happen then to the monitors. I use the new Duplicator with two digital outputs. When I use the older model with a digital and an analog Port Replicator, the laptop will start to analog and then when the windows screen appears, returns to digital monitor (as it should). As the nvidia driver will not load without the intel first, I loaded all the windows updates and drivers for vidoe intel and nvidia. I also loaded chipset, system utilities and verified bios is updated.

  Someone has experienced this problem or have any ideas that I might be missing?

  1. disable Optima in BIOS

  2. go on Nvidia.com site under drivers and have it detect your video card.

  3. install the Nvidia driver using custom settings, choose clean install. (This will reboot twice during the installation) After the second restart a monitor will start.

  4. change the settings of your video card to drive both monitors.

  at this point to change your power to the 'status quo' setting when the laptop lid is closed. Close the lid and restart.

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob