Precision T7400 - convert from SAS to SATA

Similar Questions

• 4 TB drive added for dell precision t7400 but does detect that 2 TB

  Hello everyone,

  We had a Dell Precision T7400 running windows 7 Professional SP1 and we have added a new hard drive (4to), but it does detect that 2 TB of disk (already placed the GPT disk).

  I read in another post that I started to update the SATA drivers?

  Is this correct?

  Where are the SATA drivers?

  Thank you.

  Best regards.

  The drive is connected to the motherboard or are they connected to a controller card? The T7400 controllers (SAS 6/iR, PERC 6 / i) do not support disks larger than 2 TB. If it is connected to the motherboard, you must update the Intel RST drivers:

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

• convert from 2013 2012

  no idea how to convert from 2013 in 2012?

  Thank you very much

  In LV2013 file... Except for the previous Version.

  I don't know if this is available for all versions of LV (I Pro). You can also post your vi to the Commission on conversion of version

  http://forums.NI.com/T5/version-conversion/BD-p/VersionConversion

  Ben64

• error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'__Code: UNICOD problem__ MapiMessage message; __message.lpszSubject = _T ("International Translation package Attached"); Error at this stage. ___

  Project is in UNICODE format in VC6.0 MFC on windows XP

  error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'
  Code:

  MapiMessage message;
  message.lpszSubject = _T ("International Translation package Attached"); Error at this stage.

  I would know how can I use MapiMessgae in my program using Unicode.

  Suggest me any change in

  Thank you and best regards,

  Sanjay.

  Hello Sanjay

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/vsexpress

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maintaining links between PDFs converted from source (Word) files

  Hello

  If I have two Word files and manage the links between them (hyperlink on one specific bookmark on the other), is there a way to easily remember (or reproduce) these links on PDF files converted from Word files?

  Here's what I've tested so far.

  -On the source file, the format of the hyperlink is "{filename} .docx #{bookmarkname}. I changed the extension of docx to pdf.

  -Source/target to convert Word files to PDF format.

  -The hyperlink on the converted source PDF is in the format "file:///{targetpath}/{targetfile}%23{bookmarkname"}

  -When I click on the hyperlink on the converted source PDF, security warning pops up with "this document tries to connect to...". »

  -If I click on 'Allow' on the pop-up, the web browser opens with "cannot display this page" error. "

  
  

  I guess that by using the hyperlink is not a viable solution. If the links do not work, do the following manually?

  
  

  - source file Word, remove all hypertext links (because they do not work on PDF even when)

  -convert files to PDF format

  -on target of PDF, the value named destinations on the points corresponding to Favorites
  

  -on the source PDF, find points corresponding to hyperlinks and define the links to destinations named on target PDF.

  
  

  (Actually the situation is more complicated because files are shared at the chapter level and they should be merged for each new version.)

  
  

  If there is a simpler method to achieve this, I would appreciate your help.

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  That's why your problems... You use the PDFMaker plugin, IE the Acrobat Ribbon.

• I'm trying to highlight objects and text in a pdf file converted from a cadd drawing but can't do either?

  I'm trying to highlight objects and text in a pdf file converted from a cadd drawing but can't do either?

  It may be that the PDF file is simply a graph. The highlight tool works on the text, not graphics. You may need to use the marker or another graphic tool.

• paid for my account and impossible to convert from PDF to word

  I have to pay money creates for this?

  Hi its been a year and I still cannot convert from PDF to word and I can't, but I was charged $23,88 again it's my bank statement details

  ADOBE SYSTEMS SOF, 044-207-3650

  My order number is 281076816 please refund the last payment of the 02/11/2015 as I does not approve and stop my subscription

  Thanks Geoff Baker

• Disks hard SAS and SATA in mixture with controller H730 R730

  I try to set up a new server for our SMEs and wanted to know if I could use say hard 2 SAS drives in raid 1 configuration for hyper-v (r2 2012) host then use 6-2 TB of SATA drives in pass-through mode for use with storage for 2 VMs.

  Bobc007,

  The rule with the help of SAS and SATA drives is that you CAN mix the two in the same controller. You not CAN NOT mix SAS and SATA in the same virtual disks well. The configuration you are looking for is a supported configuration.

  Let me know if this helps answer your questions.

• Cannot find the boxes with inlay of text that have been converted from Quark

  Hi all.  It's kind of a weird one.  I have a lot of documents that have been converted to different versions of Quark to Indesign CS5.5.  I need to find all the text boxes that have a 0.139 text inset, which seems to be the default for text boxes that have been converted from Quark that have text box.  I'll find/replace, choose the command object and set my search criteria for spacing to insert at 0.139, leaving all other criteria being. He comes back and says no matches found.  If I create a new document and test it, it works fine.  Is there something that I am missing?  What is a "bug" due to a converted Quark document? I tried to uncheck all the attributes object except inset spacing without result.

  Doing this by hand is VERY time consuming as you might imagine.

  Any help would be greatly appreciated.

  The inDesign CS5.5, Version 7.5

  Mac OS x 10.6.8

  Bryan

  I think that your problem is with your conversion unit. 0,0139 inches do not match one point PostScript (it is equal to 1,0008 PostScript points). You should try the same method you were using, but rather try to enter "1 point" as your search query.

• PDF, flattening of dialogue when printing PDFs which is converted from PowerPoint presentations

  When you try to print certain PDF documents that have been converted from powerpoint to PDF, I get a dialogue flattening when printing. This dialogue takes forever and makes it almost impossible to print. I get that this dialogue in Adobe Reader X and that doesn't happen in other players (like FoxIt for example). How can I fix this in Reader X so it can't?

  The process used to convert presentations PowerPoint is to go to record and send, create the document (which opens in word), then save from Word to PDF.

  Thanks in advance!

  The problem is caused by transparent objects. The file must be flattened to print correctly. Player has no option for flattening and not the possibility to save the file in an image format that will ignore the transparent areas, but it can print the file as an image. In the print dialog box click on the Advanced button, and then select 'print picture '.  File will process without any additional latency time and print exactly as it appears on your screen.

• ASUS P6T7 WS - SAS and SATA RAID-0 / boot

  
  

  I am trying to determine the optimal configuration of HD to better use
  the 2 x SAS and 6 x SATA connections on the motherboard P6T7.
  I intend to fill all 12 available bays 3.5 "in the Lian Li PC-A77F and want
  to control all devices SATA 12 of the Mo without the use of an expansion card.

  
  

  1. is it effective to use a x 4 SAS to SATA fanout cable to configure a
  equipped with four SATA RAID-0 drives on one SAS channel?

  
  2. is it effective to use a x 4 SAS to SATA fanout cable to connect one
  SATA boot drive drive 1 + + 2 optical drives on one SAS channel data?
  (I realize boot must be BIOS configured via the Marvell SAS host utility)

  
  3. should I stick to a plan 'a channel and a device' and use the add-on controller
  for the SATA device rest four bays?

  
  4. If the answer to ' 3 is in the affirmative, what is the best use of channels 2 x SAS if all the»
  There are SATA devices? (bootable disk. optical media, or just a single SATA drive)

  
  

  Thank you

  1.

  I don't think that it is possible to use this motherboard connector fan-out cable single to multiple disks disk

• Hard drive upgrade from IDE to SATA for Precision 360

  Hi all

  I need help.  I have a Dell Precision 360 with two hard 40 GB IDE disks.  I would like to move to a WD Caviar 640 GB hard drive and throw the other two.  The WD hard drive is a SATA connection.  I'm sure I need to purchase a controller card, but I don't know what kind to get.

  I've read other messages concerning an upper limit of 137 GB, but I think that referred to as prior to Windows XP Sp2.  I also read that do not mix disks hard IDE and SATA hard drives, DVD IDE burners mix with SATA drives?  Any advice would be greatly appreciated for this kind of upgrade.

  Thanks in advance,

  Feliuscat

  Precision 360

  Intel Pentium 4 2.8 Ghz 3 GB Ram

  Windows XP SP2.0

  nVidia Quadro FX 500

  21 in. Dell Sony Triitron CRT monitor

  
  

• SyncRep between SAS and SATA pools

  Hello

  I know it works as I have it configured. The performance of SAS volumes will not be affected by SATA. I know that writing is not recognized until the page is in the two pools but as the SATA table is slower than what will happen. I guess that the latency will increase?

  IOPS / s wise, it could be close (partially depends on if you have 12 or 24 15 k drives in this 6100XV), but wise as the SATA drives would still slow down you the search time.

  When you perform a synchronous replication (from any SAN provider) you really want the same type of raid, the same discs, same number of readers or your performance will be slower car and raid type.

• Cannot start vm converted from Server 2 to the ESXi4

  Hello

  I have a problem with the converted vm boot from Server 2 straight to ESXi 4. Used the last Converter 4.0.1 - 1.

  previous 4.0 was not able to create the ide controller.

  After the boot, black screen with the cursor is displayed. No travel

  Details:

  ESXi 4 Installation on hp enterpise desktop dc7900 (core 2 duo, sata drive)

  Edit the disc (VM on the server 2):

  Adapter: IDE 0 device: 0 (disc 1)

  Edit the disc (the VM even converted on ESX 4i):

  IDE (0:0) hard drive 1

  Tell the truth, I don't know why the drive on the virtual machine source is IDE... But it's important VM and I would like to make it work on ESXi 4.

  Please help to make it work.

  THX.

  Michael.

  By default the virtual machine in VMware Server have a virtual IDE drive.

  But on ESX (i) is better to use a virtual drive SCSI (the only supported up to vSphere).

  You can try to maintain the same controller, but you can also change and converter will reconfigure your OS (if supported) to match the new controller.

  André

• What Preset with. AVI files converted from other sources - pre 7

  Sorry, but I'm new and a little confused with some installation options.
  
  I bought the first Elements 7 of Steve book and read it (it's the great BTW) but have a few questions to start my project.

  Book of Steve, I understand that I am better to convert my Panasonic. MTS files to AVI (in fact, I am converting all my sources to. AVI).  So my questions are:

  (1) I use AVS video Converter 7.0 to convert all my AVI sources.  AVS offers several AVI profile. It is important that the one that I use?  I want to use the AVI profile called

  HD 1080 p video: h.264/AVC, 4200 Kbps; Audio: MP3, 256 Kbps that guard the 1080 and the big screen...

  then use the same profile for non wide screen (except use the options of the advance of the to have capture 720 x 540 instead of 1920 x 1080)

  
  The other AVS profiles for. AVI are: (of course, I'm confused why we MPEG-4 in an AVI file, but they all register under.) (AVI)

  

  
  (2) then, then what preset uses?  Since these are all. AVI on my hard drive, I am confused with all the choices.

  I am considering NTSC-HDV-HDV 1080i 30, but AVCHD, DV, HDV, and HARD DISK offer all the options that seem to work.

  Thank you

  Brad

  Some details on my PC

  PC:
  Intel based I-7 quad 930 2.8 GHZ
  Map of mother MSI X 58 - M i7
  6 GB DDR3
  ATI HD4890 1 GB ram video card
  HD 500 GB (I'll add a second soon)
  Sound Blaster X - Fi Titanium Fatal1ty sound card
  Windows 7 pro 64-bit
  7 pre and CS4 are loaded on the PC

  Videos;
  Some I'm old VHS capture
  Convert some 8 mm converted to DVD (VOB) to AVI
  a couple of FLV converted to AVI
  My panasonic HDC-HS100 camcorder MTS files.

  I would recommend capturing your VHS, DVD and video with the ADS Pyro 8mm and I would recommend it download files AVCHD with Premiere Elements and display an AVI from there so that you can combine all projects. (Make sure the parameters of project selected for AVCHD precisely corresponding to your camcorder - and give the file a few minutes to comply before trying to modify.) "You will see progress in the lower right of the program.)