Preciso particionar ch94 external 1 TB hd device

Similar Questions

• If I want to play games, should I get a mouse external or other game device?

  I play games on my laptop. Should I get a mouse external or other game device?

  Yes

  A specific gaming mouse is not necessary (they have additional, programmable buttons. That's about it)

  Obviously a mouse pad will help and if your playing games that require voice or audio communication depends on a kind of helmet? helmet will help

• Why does my drive usb 2.0 portable external hard appear under devices and printers and not under computer (Windows 7)?

  I have been using this Toshiba 750 GB USB 2.0 Portable Hard Drive to clone my computer with NTI echo regularly, but now I want to use the player to launch mirror Carbonite image on.  Because the player was not visible under 'Computer' on my machine, I tried the portable player to the computer for Windows 7 to my wife where it displays correctly and I was able to do a full format of the portable drive.  Despite this, my computer is not displayed under 'Computer' portable player, but it appears under "devices and printers"...    Thank you for your understanding!

  Thank you for your helpful answer.  I tried all through and including uninstall NTI Echo without any resolution.

  During the process, I found myself 'Computer management' which includes 'Disk management' where I saw the external hard drive in 'offline' status due to a conflict of signature.  I clicked to the external drive to go "online" and now, it seems to work fine and is visible to E:

  Thank you, once again!

• My WD external HARD disk usb device does not appear in the computer on XP and Win7, but appears in the system tray?

  I have 2 GB external usb external hard drive that appears in the XP and Win7 system tray, but not in my computer/workstation?

  When I go to the management of computer disk/storage/management - is not there in XP but it is for Win7.

  How to work various PC and diferent OS?

  If you view the contents of the external drive, I think that the first folder contains a USB driver that you need to install to run properly, if you cannot view the contents of drive I'm sure you can download the driver for Western Digital. I think that the work of readers well on Windows 7 installs with 3 USB ports, but drivers are needed for USB 2.

• Sync to external trigger in conjunction with a nearest pulse frequency device fixed...

  I am writing an application running a scan frame. One axis of the scanner runs at a fixed frequency. I use a scanner high speed 5105 to get the data. The slow axis of the scanner is controlled by a servo with an analog input. I have will probably use an M-series card for analog control, but can also go with a 6713 (output only) or another Board. Fixed frequency Analyzer provides a clock line, I want to use to drive the 5105. In addition, the analog card must be synchronized in this. The entire system should be able to accept a trigger external devices, as it starts scanning at the edge of clock on next line.

  I'm not quite sure about what would be the best way to do it. External triggering from other devices will be an indeterminate pulse width, so I can not just use it as a portal for the line clock. I am reluctant to do it in software (IE via the detection of changes on a digital line) because I want to be reliable started the next clock pulse. I have taken into account things like a counter/timer with a relaxing break, but which could lead to drift between the narcotics control and frequency scanner fixed. It seems just more complex that I think it should be, and it feels like I'm missing a simple way to do it.

  Any suggestions?

  Hi cshl,.

  Good to know - the 5105 has a duty cycle of tolerance of 45-55% (mentioned on the page of the form), so that is why you cannot change clock speed from 3 to 12 MHz on-the-fly (though if you make small incremental updates over time, it would be theoretically possible).

  With the additional information in mind, you might want to try the following on the 5105:

  Use the external trigger as a trigger of departure (arm of acquisition).

  Use the line as a signal reference clock (with a position of 0 samples for reference ~ 7500 are after initiation).

  The problem with this is that you will have to re - trigger on each line - 5105 has a 2.4 rearm us time (also mentioned in the page on record).  If this is unacceptable, another way that I can think of is to use a clock to external reference in PLL internal clocks of the bezel to.  If you can provide a stable, a clock accuracy 50 ppm which is synchronized with your scanner within reach, would solve the problem of drift over time without having to re - trigger on each line (only acquire data continuously).  This clock frequency must be between 1 MHz and 20 MHz in steps of 1 MHz.

  We have no Council can take in an external variable clock up to 12 MHz (on-the-fly), but if you wanted to compromise a little bit the 6115 can enjoy up to 10 MHz, and has no obligation to cycle to 45-55% so it's maybe interesting look in.

  As far as AO goes, I assumed that the clock line is declared after the quick scanner has completed his turnaround (ideally you do not update the zone of OCCUPATION during the lead time).  If you have a signal Analyzer that you can use instead probably easier.  If not, our peripheral series M and X series (but not the series AO 67xx) offer reference clock feature so if you go with the idea of reference mentioned above clock it may be easier to simply PLL the clocks together.  These cards in a PXI chassis or are they PCI form factor?

  I don't know what you mean by the sticking point about the need for two triggers.  I think the idea is that we use the external trigger to arm the 5105 and clock line to trigger each record.  However, if you do not need to generate a pulse double based on the clock of your line then you can use counters to do (our counters are redeclenchables with time to rearm in the ns range).

  Best regards

  John

• Satellite M50D - Has: devices of USB 3.0 not working in USB 3.0 ports

  I use 2.0 devices in the ports of 3.0 fine, but my 3.0 Flash Voyager USB3 8 GB device will not work. It connects then disconnects once, not appearing is not in the Device Manager to all.

  I tried to install the USB driver out this version of the site 2.0.10.273 - 130101 has for my model. It made no difference.

  Install Windows 8.1 system

  Any ideas? Thank you.

  You are able to use this USB through a USB 2.0 port?
  Check it out.

  But at this point its not easy to tell if its USB device issues or problem of USB port.
  If other external USB 3.0 devices work properly in the frame of your laptop, the problem is related to the Flash Voyager USB

• Portege R700 does not pick up external hard drives

  Toshina R700 fails to pick up external drives, if connected directly to this laptop or through a USB hub.
  Nothing appears in the Device Manager or disk management.

  Laptops running XP Pro 32-bit ONLY.

  Mounted drives have been removed from the register (HKEY_CURRENT_USER\Software\Microsoft\Windows\Curr entVersion\Explorer\MountPoints2.
  and
  HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices)

  I currently have two workers at a distance with this problem

  The external USB HDD work with other computers?
  You can use the external with other USB devices USB ports?

  Have you tried to refresh or to reinstall the USB ports once more?
  Do this. Remove Controllers USB and ports USB & the hubs in Device Manager and reboot the laptop.
  Then the USB ports should be recognized again.

  By the way; Win XP requires an installation of all service packs and all the patches. I recommend that you check this!

• Boot m200 from an external CD / DVD / Combo / fdd

  I have read several forums regarding the prosess of m200 start-up, but I'm still not clear abt what to do. I have an ext usb samsung and BenQ ext usb combo floppy drive, but none of them r able to boot my tablet. Can anyone here help me. I need to know how to start my number of these devices and if this is not possible, what to do. Any other usb drive will work, any other pcmcia device? Please guide.

  Hello

  If you want to reinstall the operating system, you must use external CD or DVD device. Is very important that this external device is recognized by NB and good driver should be installed. For this you can use the external floppy drive. Do you have a?

• PX1266E 250 GB external USB HDD - it's going to work with USB1.0

  I just bought a PX1266E 250 GB external hard drive USB need USB 2.0. My PC is quite old and has only USB 1.0. My new external hard drive works with USB 1.0?

  Usually, the USB 2.0 standard is compatible to the bottom. This means that external USB 2.0 devices are able to operate with standard USB 1.0.
  If your device supports only the 1.0 standard USB HARD drive should work, but data transfer is much lower than the USB 2.0 connection.

• Need info on the type of hard drive inside USB 1282E device - 1 12

  Hello

  I want to know what type of hard drive interface inside this external USB (ATA/IDE) device and which hard drive is hidden inside.

  Thank you
  Volker

  Hello Volker

  I wonder just who should have this info. This info is probably available in some non-public documents. You have this HARD drive?

  To be honest this number doesn't help much. Did you check in Google? No results at all.
  Are you sure the description of the HARD drive?

• Bluetooth automated shut-off valve, possible disk external hard usb

  We bought a new iMac, retina 5K 27 "end 2015 when it came out. Since the first day we have been faced with a problem where the bluetooth disconnects, Magic Mouse 2 Magic Keyboard are disconnected and then reconnected. The mouse freezes, and about 3 to 5 seconds later the notification "lost connection" flashes on the screen, then the reconnect upward and will begin working. The entire range of not being able to use the keyboard and the mouse will last about 7 to 10 seconds. It happens randomly, maybe once or twice a day, or more.

  I opened two cases with Apple support, all first, they had me reset the SMC, PRAM, a bunch of stuff. It seems not really to improve. The second said to reinstall the operating system, "do a reset. I still have to do it, mainly because it is a PC brand new and has had the problem since the first day.

  Today, I noticed that the Time Machine backup seemed to start right at the time the connected bluetooth. We have two new Western Digital USB hard drives connected, it is formatted HFS + for the backup Time Machine, another ExFAT for the media and the extra space. Could the external USB drives cause bluetooth disconnection as bluetooth seems to be connected via the USB controller? If so, how do fix us this without disconnecting USB readers? Looks like they shouldn't cause the USB or bluetooth to reset!

  For such an expensive computer, this issue is extremely frustrating, considering Apple support could not resolve. For any help or suggestions much appreciated, thank you!

  Logging HFS +.

  Device name: my passport 0829

  Media name: WD My Passport 0829 Media

  ExFAT

  Device name: my passport 0827

  Media name: WD My Passport 0827 Media

  Unreliable wireless performance may occur when external USB 3.0 devices are close

• Turn off the screen on Tecra and using external monitor/LCD TV

  I recently bought an LCD TV and was anxious to use it as a monitor for my Toshiba Tecra M2V. I ran into problems.

  I seem to be unable to 'disable' the laptop screen and ONLY use the LCD TV screen at cary, work, games etc. I seem to be rather only beable to COMBINE the LCD with my LCD screen, by creating a "two" screen I followed all the online help and I am still unable to have one screen.

  I just want some LCD TV as my screen!

  Any ideas on how to do this? It's really a pain!

  TIA

  Hello

  Usually, you should be able to do this by using the FN + F5 key combination. As far as I know if the device is connected to the TV, you have three options (maybe depends on the laptop model) LCD only, LCD and external, just the TV device.

  You can also try to switch using GeForce properties:
  Display properties > settings > advanced > GeForce tab > Device Settings > Select output device.

• An external sample clock between sharing arrangements

  I need to acquire samples of 2 separated Renault M series (PCI-6254).  My master device receives a sample of 8 on PFI0 KHz clock.  Is it possible at the root of this clock of the master to the slave via a RTSI cable device?

  I looked through the forum and the sample programs, but have only seen examples in which the master clock on board the aircraft happened to the slave.

  It is possibe to synchornize device slave the master clock to external sampling of the device?

  Thank you

  ANT1

  ANT1,

  Fortunately, most of the time something that can be done in DAQmx in LabVIEW can be done in ANSI C using the appropriate function calls.  I have listed the following steps of the program example LabVIEW and retouched to remove anything that it is not suitable for the DAQmx configuration.  I'm sure it should work for you.

  Steps to follow:
  1 create a channel of analog input voltage for the master and the slave.
  2 set the synchronization parameters.  For the master, select the source of the external sample clock.  Set the source AI/SampleClock of the master for the slave device.   (Note: sample of the master clock is automatically routed through the cable RTSI.)
  3. for the slave, set the Source of the trigger to the AI/StartTrigger of the master device.  This will ensure that both devices start sampling at the same time.  (Note: the trigger is automatically redirected via the RTSI cable.)
  4. call the start task to start the acquisition.  (Note: start slave task before the master task.)
  6. read all waveform data.
  7. call the clear task to stop the acquisition and clear the task.

  So, essentially, the value of the task of the slave to the top in the same way as you would for the synchronization of clocks on board, but configure the task to master as you would for an external clock.  This will automatically share the external clock and trigger on the line of the RTSI.

• Device identifier is invalid for DAQmxCfgDigEdgeStartTrig

  Device: USB-5133

  Software: Driver NOR-DAQmx ANSI C 8.7.2f1

  I have a work program that extracts data from the entry using software (immediate) fine analog trigger.  However, I get a weird error when I try to use PFI1 as an external trigger:

  Measurements: Device identifier is invalid.

  Specified device: dev9

  Status code :-200220

  It seems to tell me that dev9 is invalid (which would be true), wait that I specified dev2 in the function call. In the search for other examples, this seems like it should work.  Here is the code I am using.  I would like to get a glimpse of what could happen here.

  error = DAQmxCreateTask ("", & taskHandle);
  If (DAQmxFailed (error))
  {
  DaqError ("scanner error (DAQmxCreateTask)" ");
  Returns false;
  }

  error = DAQmxCreateAIVoltageChan)
  taskHandle, / / task handle
  "dev2/0", / / physical channel name
  "", / / Name of channel virtual, so white uses the name of the physical channel
  DAQmx_Val_Cfg_Default, / / the input terminal configuration
  -1.0, / / measure the minimum value you expect
  1.0, / / maximum value that you expect to measure
  DAQmx_Val_Volts, / / the units of the two previous settings
  (NULL);                   Name of the custom scale
  If (DAQmxFailed (error))
  {
  DaqError ("scanner error (DAQmxCreateAIVoltageChan)" ");
  Returns false;
  }

  error = DAQmxCfgSampClkTiming)
  taskHandle, / / task handle
  NULL, / / terminal the sample clock Source (use NULL for internal)
  RPSC-> SampleRateHz, / / sample rate in samples per second
  DAQmx_Val_Rising, / / Edge of the clock to acquire samples on
  DAQmx_Val_FiniteSamps, / / sampling mode
  RPSC-> nCount);           Number of samples per channel to acquire
  If (DAQmxFailed (error))
  {
  DaqError ("scanner error (DAQmxCfgSampClkTiming)" ");
  Returns false;
  }

  If (m_trig_type is Trig_Serial)
  {
  error = DAQmxCfgDigEdgeStartTrig (taskHandle, "/ dev2/pfi1", DAQmx_Val_Rising ");
  If (DAQmxFailed (error))
  {
  DaqError ("scanner error (DAQmxCfgDigEdgeStartTrig)" ");
  Returns false;
  }
  }
      
  error = DAQmxStartTask (taskHandle);
  If (DAQmxFailed (error))
  {
  DaqError ("scanner error (DAQmxStartTask)" ");
  Returns false;
  }

  Hi Benote,

  Welcome to the Forums EITHER!  The USB-5133 is intended to be used with the driver OR-SCOPE as opposed to DAQmx.  The likely reason that the code works initially, is that NEITHER-SCOPE is based on our DAQmx driver.  You may be able to perform certain functions DAQmx, but many of the features of NOR-SCOPE are implemented differently (it seems that this would include trigger).  Since the 5133 is not intended to be used with the DAQmx driver, we could expect to see unusual (or incorrect) error messages that you receive.

  If you haven't done so already, I recommend that you install OR-SCOPE (the link above or from device drivers CD).  Examples of NO-SCOPE and documentation can be found at:

  Start > all programs > National Instruments > NOR-SCOPE.  If you have any questions do not hesitate to ask.  Thank you and have a great day!

  -John

• 5OO GIG undetected USB external HARD drive

  Original title: 5OO GIG EXTERNAL HARD drive USB device

  System is unable to load the external hard drive.  The hard drive lights to indicate power, but the system does not show the joining, so I can't load anything on it.  Any ideas?

  Hello

  -The problem occurs on all USB devices and ports?
  -Don't you make changes to your computer, after which the issue started?
  -What operating system is installed on your computer?

  I recommend you follow the steps in these links that talk of a similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-hubs-not-recognized-in-Windows-7/2147865a-6e2f-46a0-b996-2999aabe9ab6
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/external-drive-is-not-recognized-in-Windows-7/3461b4fd-8e6b-44b2-8c73-aba682a4275e