Preferred for controlling VLAN method captures on JOINT?

Similar Questions

• Windows 7 Ultimate compatible driver for Philips SAA7130HL Multimedia Capture Device?

  Where to find the compatible driver Windows 7 Ultimate for Philips SAA7130HL Multimedia Capture Device?

  Hello

   

  Method 01:

  I would say go to devices and just by clicking on the Device Manager and updated driver for the device and check if you can get the drivers.

  Open the http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager Device Manager

  If you have the drivers CD, you can try to install the drivers and see if it works well or not, can also try compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  Method 02:

  I suggest you to check the Windows Update to see if a driver is downloaded and installed automatically.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I suggest you contact Philips for support with this device:

  http://www.support.Philips.com/support/contact/contact_page.jsp?userLanguage=en&userCountry=us

• ADF Data Control WS - methods with 'Object' instead of native types

  Recently, we noticed a strange behavior during the integration of services SOA Suite with ADF Web Service data controls:

  -Consider a service, where the WSDL has the following operation:

  <wsdl:operation name="CreateEmployee">
    <wsdl:input message="inp1:requestCreateEmployeeMessage"/>
    <wsdl:output message="inp1:replyCreateEmployeeMessage"/>
  </wsdl:operation>
  

  - And the request message is:

  <wsdl:message name="requestCreateEmployeeMessage">
    <wsdl:part name="payload" element="inp1:CreateEmployeeRequest"/>
  </wsdl:message>
  

  - And the element in the message:

  <element name="CreateEmployeeRequest">
    <complexType>
    <sequence>
    <element name="EmployeeId" type="int" minOccurs="0"/>
    <element name="EmployeeName" type="string" minOccurs="0" nillable="true"/>
    <element name="Salary" type="decimal" minOccurs="0"/>
    </sequence>
    </complexType>
  </element>
  

  -If this service is added to a project ADF as a Web Service data control, the method in the control of data will be represented by:

  CreateEmployee(Object)
  

  -However, if you change the WSDL file, so that the element has the same EXACT name as the operation:

  <wsdl:message name="requestCreateEmployeeMessage">
    <wsdl:part name="payload" element="inp1:CreateEmployee"/>
  </wsdl:message>
  <element name="CreateEmployee">
    <complexType>
    <sequence>
    <element name="EmployeeId" type="int" minOccurs="0"/>
    <element name="EmployeeName" type="string" minOccurs="0" nillable="true"/>
    <element name="Salary" type="decimal" minOccurs="0"/>
    </sequence>
    </complexType>
  </element>
  

  -Then method of data control will be displayed as:

  CreateEmployee(Integer, String, BigDecimal)
  

  It's strange because the WSDL file is still valid, if the element root of the query has a different name of the operation (the SOA service was created using JDeveloper).

  In addition to this solution that I share, alternative would be:

  (1) create a proxy for the service and register the proxy under control data instead

  (2) to call the service, as shown here

  Is this a Bug?

  When you have an object as a parameter to a data control, you should also see a parameter created object that has simple types.

  For example, see the video here:

  https://blogs.Oracle.com/Shay/entry/calling_web_service_with_complex

• Why Linux is preferred for Oracle

  Why Linux is preferred for Oracle?

  I helped clients running databases Oracle of small, medium and large scale (from 500 MB to 10 TB total segment size) on a variety of platforms Unix, Linux and Windows environments.

  The primary consideration for platform in 90% of these configurations is what works the best with the application solution / they run on their databases. I am passionate about Linux for small and deployments of medium sizes due to the following:

  1. relatively stable (no need to worry about the restart mentioned scenario earlier)
  2 takes in charge virtually all Oracle database architectures you might need (CCR, single instance, warehouse, etc.)
  3. support of OS relatively cheap (especially if you go with Oracles OEL), own can operate on mid-range servers
  4. allows you to stuff more "fancy" like virtualization of servers, clustering OS filesystems in cluster, integration in Windows domains, etc if you need competent of your availability/recovery solutions data disaster.

  Of course, all this assumes there been no egregious mistake you make when you configure the server ;) This is usually the point 3 which marks better with it management, but it may be a learning curve important for companies that might be more familiar with the Microsoft platforms, for example.

  Personally, RHEL or OEL is my platform of choice for small to medium deployments that don't have no platform restrictions, as well as to run software such as Oracle Grid Control (and soon Cloud Control)

  But really, the question of the preference really depends on what you need your database to / support.

• How to use labview for controlling the HP Network Analyzer

  Hello

  I have a HP network analyzer 8720D connect with my laptop by a USB-Gbspecifications FOR cable. I want to use LABVIEW for control to parser do measurement and data collection. What should I start? Where can I get the labview program to control the parser?

  Thank you.

  Help > find instrument Drivers. Then go to the Instrument Driver Network and read all the links on the use of pilots.

• 3550 Config for multi VLAN on a 1200 AP

  I'm testing a presentation wireless with several VIRTUAL LANs in a sandbox test lab. I am trying to run 3 VLAN on one allows 1200 AP. say 300 VLAN (10.50.0) is 40 bit WEP, 400 of VLAN (10.50.1) is open, 900 (10.50.2) VLANS is 128 bit WEP. VLAN 400 is the VLAN native with the AP 10.50.1.1 (I utilise.254 for gateways de.1 instead)

  The configuration of the AP is well documented. The problem is that I have a layer 3 3550 switch I need to configure Fa0/23 for the VLAN multiples to the AP. I couldn't dig up documentation for the configuration of the side of the switch. Can someone point me in the right direction for this configuration documentation or?

  Thank you

  Here is the document that will help you:

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/c3550/12114ea1/3550scg/swvlan.htm

• Can we still use NOT_SUPPORTED and supported for any request method?

  Hi all
  
  Because the database selection didn't need a transaction (Please correct me if that's wrong), define the level of transaction "NOT supported" or "Supported" for all of these methods that question only something database?
  
  Maybe these methods will be called in other in a transaction, so "NEVER" cannot be used.
  
  My question is: is there a reason to get a transaction for methods without any insert/update of database?
  
  Say there are three beans as below:
  
  @Stateless
  @TransactionManagement (TransactionManagementType.CONTAINER)
  / public class InsertBean implements {Insert}
  @Override
  @TransactionAttribute (TransactionAttributeType.REQUIRED)
  {} public void createUsers (< user > list of users)
  INSERT INTO user WHERE...
  }
  }
  
  @Stateless
  @TransactionManagement (TransactionManagementType.CONTAINER)
  / public class QueryBean implements Query {}
  @Override
  @TransactionAttribute (TransactionAttributeType.NOT_SUPPORTED)
  public int getUserNumber() {}
  SELECT COUNT (*) FROM user
  }
  }
  
  @Stateless
  @TransactionManagement (TransactionManagementType.CONTAINER)
  / public class UpdateBean implements {update
  @Override
  @TransactionAttribute (TransactionAttributeType.REQUIRED)
  {} public void updateUsers (list < user > users)
  UPDATE user SET logindate = xxx WHERE...
  }
  }
  
  Insert and update requires a transaction and not the query. If there is a method of bean called as:
  
  InsertBean.createUsers (users);
  int n = QueryBean.getUserNumber ();
  UpdateBean.updateUsers (users);
  
  In this case, that the level of transactions for getUserNumber() request method must not be 'NEVER', only 'SUPPORTED' or 'NOT_SUPPROTED' is reasonable. But 'NOT_SUPPORTED' is more effective. So can I use level 'NOT_SUPPORTED' for all methods of query?
  
  If sometimes the query method must be in a transaction could you share?
  
  Thanks in advance.

  When the query is running for a long time and you who call inside the transaction, the transaction may time out.
  In this case you would go non-supported, so that this transaction manager can take the action when the method
  is called within a transaction. Otherwise it does not really matter.

• A recipe for writing equals method: use getClass() or instanceof?

  Hello
  
  At page 195 of the Core Java: volume 1, basic principles, 8th edition, there is a recipe for writing
  the method equals perfect. Section 4 says:
  
  Compare classes of this and otherObject. If the semantics of equals flexible in
  subclasses, use getClass test:
  
  

  if (getClass() != otherObject.getClass()) return false;

  If it has the same semantics for all subclasses, you can use an instanceof test:
  
  

  if (!(otherObject instanceof ClassName)) return false;

  My question is what it means by "If equals flexible semantics in.
  subclasses?
  
  Thank you in advance for your help!
  
  Eric

  Glad to be of assistance.

• Code error: invalid line number 1 for class RowSet method GetRow PCPC:67

  People,
  
  Hello. I am writing PeopleCode to manipulate data in the scroll bar on level 1. My component has 4 pages and its Structure is as follows:
  
  Scroll - Level0
  JournalHeader
  JournalLine
  JournalTotal
  JournalError
  
  Scroll - Level1 primary JournalLine1 Record
  
  While JournalLine1 is inside the JournalLine page and its fields are 'Account' and 'amount '. The page 'JournalTotal' field is 'amount '. My job is to add up all the numbers in the field "Amount" of "JournalLine1" and assign the total amount for the field 'Amount' of the page 'JournalTotal '. My PeopleCode is as follows:
  
  
  All local & RS lines;
  Local Row row & total;
  Local Record & rec;
  Local Field & field;
  
  & RS = GetLevel0() (2). GetRowSet (Scroll.JournalLine1); / * JournalLine is on the 2nd level 0 * /.
  & line = & RS. GetRow (1); / * What a "JournalLine1" line on level 1 * /.
  
  For & I = 1 to & row. RecordCount
  & rec = & rank. GetRecord (& I);
  & field. Value = & on the ground. Value + & rec. GetField (Field.Amount). Value;
  -End;
  
  & total = GetLevel0() (3); / * JournalTotal is on the 3rd at level 0 * /.
  
  and total. GetRecord (Record.JournalTotal). GetField (Field.TotalAmount). Value = & on the ground. Value;
  
  
  
  The PeopleCode above is compiled. But when I run the component in the browser, I got this error:
  
  "Invalid line number 1 for the class method GetRow PCPC:67 RowSet. Component.GBL.JournalLine1.Amount.FieldChange. A PeopleCode program called an object method with an invalid value for the line number parameter. The line number must be in the range of lines present in all lines. »
  
  I think this error is called "& rank = & RS. GetRow (1); "Because there is only one line"JournalLine1"in level 1, it seems correct to use GetRow (1). I also tried ' GetRow (0) ' and ' GetRow (2) ", but got the same error.
  
  Why do '& rank = & RS. GetRow (1); "get such a mistake? People can help solve the problem?
  
  
  Thanks in advance.

  Try to make it simple;
  & total = 0;
  & RS_LEVEL0 = GetLevel0();
  & Row_LEVEL0 = & RS. GetRow (1);
  & RS_LEVEL1 = & Row .getrowset (Scroll.JournalLine1);
  For & I = 1 to & RS_LEVEL1. Activerowcount;
  & Row_LEVEL1 = & RS_LEVEL1. GetRow (&I);)
  & Record_LEVEL1 = & Row_LEVEL1. GetRecord (Record.JournalLine1);
  & Field_LEVEL1 = & Record_LEVEL1. GetField (Field.Amount);
  & Amount = & Field_LEVEL1. Value;
  & Total = Total & + &Amount;
  -end;

  Your_Level_0_Record_Name.LEVEL_0_TOTAL_FIELD_NAME. Value = &Total;

  I hope this will work!

  Do not no matter what declearation will be declared automaytically.

  Thank you
  Amit

• String error 42 - VI method for controls server Unflatten

  Try to use the VI-server method to save and retrieve values from control. Get a generic error 42 when using the name "minimum value" but the Vi works fine if you use a name "minimum values" conrol Vi clos can pass (using S1) between two control names to show that the error is in the difference in name. Is there a way to solve the problem or if another method to save and retrieve orders be used.

  Attached VI is in LV2010 sp1.

  Thanks for your help.

  One thing you can try is to disable the option "Convert EOL" functions to write to a file text and reading of text file.  As you save binary data as a string, you want to ensure that binary data is stored.  It may be better to use the binaries, instead of text files, because you are trying to save and load binary data.

  Chris M

• Method for controlling battery Microsoft acpi disables my battery on update.

  Hello

  
  I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.

  If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.

  As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.

   

  Hello

  I suggest you to perform the following methods.

  Method 1:

  To enable or disable Windows Update driver manually on a single computer to research

  1. Click Start, right-click computer, and then click Properties.
  2. In the tasks list, click Advanced system settings.
  3. On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers when I connect a device.
  5. Click OK twice, and then close the System dialog box.

  Method 2: install the latest drivers for chipset for laptop and the Coachman.

  If the problem persists, contact Lenovo support for assistance.

  Hope this helps!

• Capture of the error for w/o methods return values

  I wrote a script to stop groups of virtual machines in my cluster. I get a view of a VirtualMachine object, check the value of the guest.toolsRunningStatus property, and then call ShutdownGuest() if the tools are running.

  Sometimes the property guest.toolsRunningStatus is set to 'guestToolsRunning', even if the tools do not work, for example when the VMware Tools Service is stopped in a virtual Windows machine. In these cases, the SOAP Fault ToolsUnavailable messages are printed to stderr. How can I capture these flaws without redirect stderr and analyze messages? ShutdownGuest() returns nothing.

  Hello

  you do stupid things, see the following code:

  My $blah = undef;

  {eval

  $blah = guest.toolsRunningStatus ();

  };

  {if($@)}

  print 'your Exception ";

  }

  When in the block eval occurs an error that is channeled into stderr, error message will be driving in $@.

  So when $@ is defined in $@ will be the SoapFault object.

  I hope this will help you.

  Henning

• What is a good code of vi for control of pulse

  Hi, I just write a simple code to generate two pulse; the first pulse is output 5V to 200ms then stop and wait for 4 seconds. After that, another 5V pulse is on for 200ms then turned off. That's essentially what I must control relay. Relay toggle and disable type. The code seems inadequate, is there a better approach? I use USB-6008, thank you

  just a few minor changes:

  • Keep create and destroy outside loops. DAQmx tasks must be created once - preferably during development and registered to the MAX or your project.
  
  
  • Keep a handy customized with vi waiting to avoid these structures seq who botch to the top of the BD of error handling
  
  
  • 500mS pending is in parallel with the structure of the seq and does nothing but deal with 1 thread for 1/2 sec so that the structure is running.

  See revised code:

  

  This isn't very scalable.  For adaptabiity, it must be converted into State or QMH machine with "Init (Task), waiting (waiting time), write (Bool), and Exit" States.

• pair of value/label for control dynamicallly ring populated from database column

  Hi all

  I have a control of the ring in my UI that I need to dynamically fill columns from the MS SQL database. I can get the result of the database and line-by-line reading. So to create a table with the pairs value/label and pouplate control of the ring using InsertListItem? or is there a better way to do it?

  Thank you

  Kanu

  I'm not aware of a method to populate one control ring other than a loop in your table and by calling InsterListItem for each element of the array.

• Capture WebCenter Enterprise - where newspapers are written for Java script to Capture Client

  Hello

  I work in a development task to Webcenter business Capture 11.1.1.8.0. I wrote some java scripts to Capture Client Profile for validation in the field.

  According to my experience earlier version (ODC - 10 gR 3), I used to debug the coding for the control of any question, but I couldn't find any process debugger of the WEC - 11 g.

  Even I put some function like:

  function BatchScanBegin (event) {}

  println ("BatchScan begins");

  }

  But I don't know where the exit is printing. I have not found in any server logs capture.

  Can someone help me on this, like where I can get the println function display or is there any javascript debugging process.

  Kind regards

  Shad

  Go to the control panel. Click on Java. Click the Advanced tab. In the Java Console, set the property as see the Console.