Press L2L VPN, IPSEC, and L2TP PIX connections
Hi all
I'm trying to implement a solution on my FW PIX (pix804 - 24.bin) to be able to support a VPN L2L session with VPN dynamic user sessions where clients will use a mix of IPSEC(Nat detection) and L2TP. We have always supported things IPSEC and that worked great for many years. I'm now trying to Add L2TP support, so that I can support Android phones/ipads, etc. as well as Windows with built in VPN l2tp clients clients. Everything works well except for the new features of L2TP. Allows you to complete one phase but then tries to use the card encryption that is used for the VPN L2L. It seems to fail because IP addresses are not in the configured ACL to the crypto-map L2L. Does anyone know if there are any questions all these configurations support both. And if not can you see what I have wrong here, which would make it not work. Here are the relevant training:
C515 - A # sh run crypto
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set of society-ras-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac company-l2tp
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map company-ras 1 correspondence address company-dynamic
company Dynamics-card crypto-ras 1 set pfs
Dynamic crypto map company-ras 1 transform-set ESP-SHA-3DES ESP-3DES-MD5 company-ras
Dynamic crypto map company-ras 1 lifetime of security association set seconds 28800
company Dynamics-card crypto-ras 1 kilobytes of life together - the association of safety 4608000
crypto dynamic-map-ras company 2 address company-dynamic game
crypto dynamic-map company-ras 2 transform-set of society-l2tp
crypto dynamic-map company-ras 2 set security association lifetime seconds 28800
company Dynamics-card crypto-ras 2 kilobytes of life together - the association of safety 4608000
card crypto company-map 1 correspondence address company-colo
card crypto company-card 1 set pfs
card crypto company-card 1 set counterpart colo-pix-ext
card crypto card company 1 value transform-set ESP-3DES-MD5 SHA-ESP-3DES
company-map 1 lifetime of security association set seconds 28800 crypto
card company-card 1 set security-association life crypto kilobytes 4608000
company-card 1 set nat-t-disable crypto card
company-card 2 card crypto ipsec-isakmp dynamic company-ras
business-card interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
Crypto isakmp nat-traversal 3600
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 2
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
C515 - A # sh run tunnel-group
attributes global-tunnel-group DefaultRAGroup
company-ras address pool
Group-LOCAL radius authentication server
Group Policy - by default-l2tp
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
PAP Authentication
No chap authentication
ms-chap-v2 authentication
eap-proxy authentication
type tunnel-group company-ras remote access
tunnel-group global company-ras-attributes
company-ras address pool
Group-LOCAL radius authentication server
tunnel-group company-ras ipsec-attributes
pre-shared-key *.
type tunnel-group company-admin remote access
attributes global-tunnel-group company-admin
company-admin address pool
Group-LOCAL radius authentication server
company strategy-group-by default-admin
IPSec-attributes of tunnel-group company-admin
pre-shared-key *.
PPP-attributes of tunnel-group company-admin
No chap authentication
ms-chap-v2 authentication
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared-key *.
ISAKMP keepalive retry threshold 15 10
C515 - A # sh run Group Policy
attributes of Group Policy DfltGrpPolicy
Server DNS 10.10.10.20 value 10.10.10.21
Protocol-tunnel-VPN IPSec
enable PFS
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value company-SPLIT-TUNNEL-ACL
company.int value by default-field
NAC-parameters DfltGrpPolicy-NAC-framework-create value
internal strategy of company-admin group
attributes of the strategy of company-admin group
WINS server no
DHCP-network-scope no
VPN-access-hour no
VPN - 20 simultaneous connections
VPN-idle-timeout 30
VPN-session-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the IP-comp
Re-xauth disable
Group-lock no
enable PFS
Split-tunnel-network-list value company-ADMIN-SPLIT-TUNNEL-ACL
L2TP strategy of Group internal
Group l2tp policy attributes
Server DNS 10.10.10.20 value 10.10.10.21
Protocol-tunnel-VPN l2tp ipsec
disable the PFS
Split-tunnel-policy tunnelall
company.int value by default-field
NAC-parameters DfltGrpPolicy-NAC-framework-create value
Relevant debug output
C515 - Has # Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, Oakley proposal is acceptable
The outputs of two debugging who worry are the following: Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0 Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =... This seems to indicate that his NAT detection but then do not assign to the entry card cryptography because networks are encrypted are not in the configured ACL that is true. He needs to use dynamic input and it doesn't seem to be. I need to create another dynamic map entry to make it work instead of add lines to the same dynamic with a lower (higher) priority map entry? Thanks in advance for any help here. Hello That won't do the trick, l2tp clients are picky kindda, so you know if they do not hit the correct strategy first they just stop trying. Follow these steps:
correspondence from the company of dynamic-map crypto-ras 1 address company-dynamic No crypto-card set pfs dynamic company-ras 1 No crypto dynamic-map company-ras-1 transform-set ESP-SHA-3DES ESP-3DES-MD5 company-ras Dynamic crypto map company-ras 1 transform-set company-l2tp SHA-ESP-3DES ESP-3DES-MD5 company-ras
The foregoing will not affect existing customers of IPsec at all, these clients will not use the statement of pfs and will link even if the correspondence address is not configured (it is optional), besides Cisco IPsec clients will be affected first the mode of transport policy and fail however they will continue to try and hit another police PH2. Regarding your last question, I was referring specifically to the support of l2tp for android, and Yes, you will need to run one of these versions. http://www.Cisco.com/en/us/docs/security/ASA/asa82/release/notes/asarn82.html#wp431562 Tavo- Tags: Cisco Security Cisco ASA Site to Site VPN IPSEC and NAT question Hi people, I have a question about the two Site to Site VPN IPSEC and NAT. basically what I want to achieve is to do the following: ASA2 is at HQ and ASA1 is a remote site. I have no problem setting a static static is a Site to IPSEC VPN between sites. Guests residing in 10.1.0.0/16 are able to communicate with hosts in 192.168.1.0/24, but what I want is to configure the NAT with IPSEC VPN for this host to 10.1.0.0/16 will communicate with hosts in 192.168.1.0/24 with translated addresses Just an example: N2 host (10.1.0.1/16) contacted N1 192.168.1.5 with destination host say 10.23.1.5 No 192.168.1.5 (notice the last byte is the same in the present case,.5) The translation still for the rest of the communication (host pings ip destination host 10.23.1.6 N3 N2 not 192.168.1.6 new last byte is the same) It sounds a bit confusing to me, but I've seen this type of configuration before when I worked for the supplier of managed services where we have given our customers (Ipsec Site to Site VPN with NAT, don't know how it was setup) Basically we contact the customer via site-to-site VPN hosts but their real address were hidden and we used as translated address more high 10.23.1.0/24 instead of (real) 192.168.1.0/24, last byte must be the same. Grateful if someone can shed some light on this subject. Hello OK so went with the old format of NAT configuration It seems to me that you could do the following:
I could test this configuration to work tomorrow but I would like to know if it works. Please rate if this was helpful -Jouni Cisco's VPN IPSec client for LAN connectivity I've looked through further discussions and were not able to find a clear answer on this, so I apologize if this is a duplicate question. I have the client setup Cisco VPN on an ASA 5505 with tunneling split. I can connect to the VPN very well. I can access the internet fine. I can't get the LAN, however. I try to do a ping, telnet, rdp, etc devices on the side LAN of the firewall without a bit of luck. I have torn down and configure the VPN several times via the CLI and I even used various configurations by using the wizard, all this without a bit of luck. Any help would be appreciated. ASA Version 8.2 (2) ! hostname spp-provo-001-fwl-001 domain servpro.local activate the F7n9M1BQr1HPy/zu encrypted password F7n9M1BQr1HPy/zu encrypted passwd no names name 10.0.0.11 Exch-Srv name 10.0.0.12 DRAC name 10.0.0.10 DVR ! interface Vlan1 nameif inside security-level 100 the IP 10.0.0.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ServPro PPPoE client vpdn group IP address pppoe setroute ! interface Vlan12 nameif Guest_Wireless security-level 90 IP 10.10.0.1 address 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 switchport access vlan 12 ! exec banner * only authorized access *. exec banner * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. * connection of the banner * only authorized access *. connection of the banner * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. * banner asdm * only authorized access *. banner asdm * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. * boot system Disk0: / asa822 - k8.bin passive FTP mode clock timezone STD - 7 clock to summer time recurring MDT DNS lookup field inside DNS server-group DefaultDNS 10.0.0.11 server name Name-Server 8.8.8.8 domain servpro.local DRACServices tcp service object-group EQ port 5900 object EQ object of the https port EQ object Port 5901 object-group service Exch-SrvServices tcp EQ port 587 object port-object eq 993 port-object eq www EQ object of the https port port-object eq imap4 EQ Port pop3 object EQ smtp port object SBS1Services tcp service object-group EQ port 3389 object port-object eq www EQ object of the https port EQ smtp port object outside_access_in list extended access permit tcp any host *. *. *. * object-group SrvServices Exch outside_access_in list permits all icmp access *. *. *. * 255.255.255.248 capture a whole list of access allowed icmp Servpro_splitTunnelAcl list standard access allowed 10.0.0.0 255.255.255.0 inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.255.255.0 172.16.10.0 255.255.255.240 inside_nat0_outbound list of allowed ip extended access any 172.16.10.0 255.255.255.240 guest_wireless_in list extended access permitted tcp a whole guest_wireless_in of access allowed any ip an extended list NO_NAT to access ip 10.0.0.0 scope list allow 255.255.255.0 10.10.0.0 255.255.255.0 pager lines 24 Enable logging asdm of logging of information Within 1500 MTU Outside 1500 MTU MTU 1500 Guest_Wireless mask 172.16.10.1 - 172.16.10.14 255.255.255.240 IP local pool ServProDHCPVPN no failover ICMP unreachable rate-limit 1 burst-size 1 ASDM image disk0: / asdm - 625.bin don't allow no asdm history ARP timeout 14400 NAT-control Global 1 interface (outside) NAT (inside) 0-list of access inside_nat0_outbound NAT (inside) 1 0.0.0.0 0.0.0.0 NAT (Guest_Wireless) 1 0.0.0.0 0.0.0.0
static (inside, outside) *. *. *. * 10.0.0.11 netmask 255.255.255.255 Access-group outside_access_in in interface outside Access-group guest_wireless_in in the Guest_Wireless interface Route outside 0.0.0.0 0.0.0.0 *. *. *. * 2 track 2 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy AAA-server Exch-Srv Protocol nt AAA-server Exch-Srv (inside) host 10.0.0.11 Timeout 5 auth-NT-PDC SRV EXCH the ssh LOCAL console AAA authentication AAA authentication LOCAL telnet console AAA authentication http LOCAL console LOCAL AAA authentication serial console Enable http server http server idle-timeout 10 http 10.0.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outdoors redirect http outside 80 redirect http inside 80 No snmp server location No snmp Server contact Server enable SNMP traps snmp authentication linkup, linkdown cold start monitor SLA 124 type echo protocol ipIcmpEcho 4.2.2.2 outside interface NUM-package of 3 frequency 10 Annex monitor SLA 124 life never start-time now Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5 outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP outside_map interface card crypto outside Crypto ca trustpoint ASDM_TrustPoint0 registration auto name of the object CN = cisco.spprovo.com ServPro key pair Configure CRL string encryption ca ASDM_TrustPoint0 certificates certificate f642be4b 308202fc 308201e4 a0030201 020204f6 42be4b30 0d06092a 864886f7 0d 010105 311a 3018 05003040 06035504 03131163 6973636f 2e737070 726f766f 2e636f6d 31223020 06092 has 86 01090216 13636973 636f2e73 726f2e6c 65727670 4886f70d 6f63616c 31303034 30383230 35363232 30303430 35323035 5a170d32 301e170d 3632325a 3040311a 30180603 55040313 and 11636973 636f2e73 7070726f 766f2e63 6f6d3122 30200609 2a 864886 f70d0109 02161363 6973636f 2e736572 7670726f 2e6c6f63 616c 3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d 010a 0282 010100 has 5 b4646cde f981f048 efa54c8a 4ba4f51c 25471e01 459ea905 313ef490 72b4d853 4e95ab7d a8c1350e 5728dca6 a98c439e 2c12d219 06ee7209 9f2584d1 b2abf71c 31c0890f 3098533b 6bc3ad4b 3bcd8986 e70ca78e 07a749d6 ee4e0892 4fcb79b6 724f7012 9f42fc2f b80c17ed adb5d36b 67590061 453d9ae6 16583d 36 5a22b7c2 737fd705 94656f3f 578fb67f 79bd2a59 17522be3 d2386e22 2c62352f cda317b0 be805a04 76f19989 34031cbd a5fc62a7 1d9f52f3 00cf60b6 bbbdc4f0 fb651b82 b3e22a0a 718ff0b4 e213f4ac cdeb413b 9c4a47c3 9134d7a9 e8dcf2c5 c1cd4075 61d75e3a 475a17f1 2f955741 9ed2a8d6 c381eba3 247134e1 b5c33fac 7ae03d02 03010001 300 d 0609 2a 864886 05050003 82010100 f70d0101 156 5fde62c5 b4cbb0f4 0c61fab7 fae04399 27457ab7 9790c 3fac914d 70595db9 e69d3f19 3476dc51 32c885de b5904030 05624fe0 e8983e0a ab5527f3 8c5dd64a 1e1a6082 b6091657 8704c 539 a3c6be47 da2a871f 4fafe668 70db2c2b 573d47b2 7f3df02f c9d53a92 bcf5f518 9953e14c f957a6ca 279f9e9f ddbd2561 6e0503c2
ba59a165 055d697f dd028d00 5cc288c4 83ced827 9c82ef3e 7e67f2d2 6de573e3 42a0b6bf ef8d06ed cb9805f2 c38011d3 5263bc3f 5b68df7a bef36c40 8c5e33f3 26b02c27 63a9848c 8461738f cd19ae95 f059ee34 afe4bdbc 8d8d2335 751b 0621 65464b2c 4649779d 3ba01b69 8977 has 790 73815f8b 3c483f93 a5ca9685 04b6e18a quit smoking crypto ISAKMP allow outside crypto ISAKMP policy 10 preshared authentication 3des encryption sha hash Group 2 life 86400 No encryption isakmp nat-traversal ! Track 2 rtr 124 accessibility Telnet 10.0.0.0 255.255.255.0 inside Telnet timeout 10 SSH 10.0.0.0 255.255.255.0 inside SSH 0.0.0.0 0.0.0.0 outdoors SSH timeout 10 SSH version 2 Console timeout 10 VPDN group ServPro request dialout pppoe VPDN group ServPro localname *
VPDN group ServPro ppp authentication pap password username * VPDN * local store dhcpd outside auto_config ! dhcpd address 10.10.0.100 - 10.10.0.227 Guest_Wireless dhcpd dns 8.8.8.8 4.2.2.2 interface Guest_Wireless enable Guest_Wireless dhcpd ! a basic threat threat detection threat detection statistics a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200 NTP server 38.117.195.101 source outdoors NTP server 72.18.205.157 prefer external source SSL-trust outside ASDM_TrustPoint0 point WebVPN allow outside SVC disk0:/anyconnect-win-2.3.0254-k9.pkg 1 image enable SVC tunnel-group-list activate attributes of Group Policy DfltGrpPolicy Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn Servpro internal group policy Group Policy attributes Servpro Server DNS 10.0.0.11 value Protocol-tunnel-VPN IPSec svc webvpn Split-tunnel-policy tunnelspecified value of Split-tunnel-network-list Servpro_splitTunnelAcl SERVPRO.local value by default-field servpro encrypted NtdaWcySmet6H6T0 privilege 15 password username servpro username attributes type of service admin username, encrypted bHGJDrPmHaAZY/78 Integratechs password tunnel-group Servpro type remote access attributes global-tunnel-group Servpro address pool ServProDHCPVPN authentication-server-group LOCAL Exch-Srv strategy-group-by default Servpro tunnel-group Servpro webvpn-attributes enable ServPro group-alias IPSec-attributes tunnel-group Servpro pre-shared key *. ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras inspect the rsh inspect the rtsp inspect esmtp inspect sqlnet inspect the skinny inspect sunrpc inspect xdmcp inspect the sip inspect the netbios inspect the tftp Review the ip options inspect the icmp ! global service-policy global_policy context of prompt hostname call-home Profile of CiscoTAC-1 no active account http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email address of destination [email protected] / * / destination-mode http transport Subscribe to alert-group diagnosis Subscribe to alert-group environment Subscribe to alert-group monthly periodic inventory monthly periodicals to subscribe to alert-group configuration daily periodic subscribe to alert-group telemetry Cryptochecksum:52bca254012b1b05cca7dfaa30d1c42a : end Most likely you are behind a router PAT when you are connected to the VPN, so please allow the following: Crypto isakmp nat-traversal 30 Hello world I connected connection VPN IPSEC. Connection works fine. Here's the Setup program PC---R1---R2--R3---ISP---ASA I check on R3 The R3 CBAC is configured. R3 # sh ip inspect sessions | 96.51.x.x Inc. What vpn ipsec connection is established, it shows that it is plugged into the port 4500 not 500? What is default behavior? Initially when he formed theVPN connection it showed both udp, ports 500 and 4500. Concerning MAhesh It has NAT/PAT between R3 and ASA. like address (192.168.98.6) private IP allows you to configure the ipsec session. IKE detects NAT/PAT exist in NAT - D payload. IKE uses UDP 4500 to negotiate ISAKMP rather than UDP 500. Subsequently, the ESP traffic is also encapsulated in UDP 4500, in this way it can cross the NAT/PAT safely. If this behavior is expected. Tunnels of router that support s multiple VPN IPsec AND SSL VPN I have a main office and an office, each with a RVL200 connected via the IPSec VPN tunnel. We grow faster than we thought and add 2 more branches. Is there a router that is similar to the RVL200 can I put in my main office in support of multiple IPSec tunnels connected to RVL200 in branches, but also keep the SSL VPN? It seems that the Cisco ASA 5505 will do. VPN IPSEC and area based on FW I'm having some trouble running a box FW my SRI. 3945. I have a tunnel VPN site-to-site built between the router and an ASA. With on the firewall zone base all come well and I can't to host both sides of the tunnel. When I apply the zone based firewall I can always raise the tunnel but then can ping only interfaces of router ISR across the tunnel, but nothing else on internal networks. I guess that's because SRI interfaces are in the 'self' area is why I can always reach them and tunnel ends on my interface physics envy. config is below. any help would be appreciated. type of class-card inspect correspondence inside-outside-vpn-cmap tcp protocol match match icmp Protocol udp Protocol game game group-access 111 type of class-card inspect entire game inside-outside-cmap dns protocol game http protocol game https protocol game ftp protocol game match icmp Protocol ! ! type of policy-card inspect the inside-outside-vpn-pmap class type inspect the inside-outside-vpn-cmap Pass class class by default drop type of policy-card inspect the inside-outside-pmap class type inspect the inside-outside-cmap inspect class class by default drop And action must be 'inspect' instead of 'pass ': type of policy-card inspect the inside-outside-vpn-pmap class type inspect the inside-outside-vpn-cmap Pass must be: type of policy-card inspect the inside-outside-vpn-pmap class type inspect the inside-outside-vpn-cmap inspect Hope that solves this problem. problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only. I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run. the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed. I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure. but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up. I wish I could have these laptops to operate normally and time to time be able to turn on virtual machines with vpn servers and test as dfs things and replication active directory as if they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites. laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec. is there something I'm missing here with the installation of the vmware bridge network? Oh I forgot to mention, I test using pptp and ms-chap v2 I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau. now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict Hi all Could you someboy help me on that? I have a network like this: Internet Internet | | router VPN - 3005 | Internal I can set up Lan to Lan VPN 3005 and other PIX aside, but I can't ping internal network with the back of my internal network. I've already put the static route to the subnet of setbacks in the router and my subnet route internal VPN. What should I do? Thanks in advance. Banlan in fact the 3000 can do a ping will depend on your network-lists / lists access so that my not be a relevant question. Disable ipsec for l2tp vpn connection? Hello How can I disable ipsec for l2tp vpn connection? I use a linux vpn that offers only l2tp. I remember doing this with winxp in regedit. [HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/RasMan/settings] "ProhibitIpSec" = DWORD: 00000001 How is it possible in win7? Thank you. Thank you for visiting the Microsoft answers community site. The question you have posted is related to Linux and would be better suited to the community network. Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads Access via L2L AnyConnect VPN IPSec Post edited by: Shawn Barrick - line breaks It seems good Shawn but I just noticed an error on the asa-wal, you have a vpn-filter applied on the DfltGrpPolicy and since you have not any value defined the strategy of Wal-AnyConnect group then will inherit the DfltGrpPolicy vpn-filter, don't forget that the vpn filters should be applied to the incoming direction, I mean pool resources you want them to have access to. It's the ACL you have for the filter: NO_NAT list extended access allowed anyconnect vpn - ip 255.255.255.0 everything This isn't in the inbound direction, increasingly looks like you want to allow access to what it is as long as the traffic is coming from the 192.168.238.0, if that's the case, you can do this: attributes of Group Policy DfltGrpPolicy VPN-filter no Do not forget to disconnect and reconnect after the above change... If you really need to be more specific, allowing traffic for clients then apply the inbound rules, for example: Your pool is here 192.168.238.0/24 and the local subnet is 192.168.138, to this effect, the 192.168.137 is considered to be local too because of the perspective Anyconnect we'll see in the room even if it is a remote network accessible via a L2L tunnel of the Anyconnect client does not. The following AS will allow the Anyconnect Telnet client for local networks: permit access-list vpnfilt-ra 192.168.238.0 255.255.255.255 192.168.138.0 255.255.255.0 eq 23 permit access-list vpnfilt-ra 192.168.238.0 255.255.255.255 192.168.137.0 255.255.255.0 eq 23 The following ACE will allow local networks of Telnet for the Anyconnect Client: permit access-list vpnfilt-ra 192.168.238.0 255.255.255.255 eq 23 192.168.138.0 255.255.255.0 permit access-list vpnfilt-ra 192.168.238.0 255.255.255.255 eq 23 192.168.137.0 255.255.255.0 Note that the two first ACE will allow LAN launch connection to the Anyconnect client on any TCP port if he uses a source 23 port while the last two ACEs allow the Anyconnect client connect to networks the on any TCP port if he uses a port source from 23. Kind regards Tunnel VPN IPSEC Gre of the router in the branch office by Pix to the router HQ Hi all I tried to get this scenario to work before I put implement but am getting the error on router B. 01:05:38: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode failed with the peer to 83.1.16.1 Here are the following details for networks Router B Address series 82.12.45.1/30 fast ethernet 192.168.20.1/24 address PIX outside the 83.1.16.1/30 interface eth0 inside 192.168.50.1/30 eth1 interface Router Fast ethernet (with Pix) 192.168.50.2/30 address Loopback (A network) 192.168.100.1/24 address Loopback (Network B) 192.168.200.1/24 address Loopback (Network C) 192.168.300.1/24 address Is could someone please tell me where im going wrong as I read the explanation of the error and it points to political unmaching. This has confused me like the two counterparts seem to have the same settings. Config router B ====================== name of host B Config PIX ==================== PIX Version 7.2 (4) When you create a GRE tunnel between two routers, there should be a routing decision to reach the Remote LAN through local (rather than exit directly the physical interface) tunnel interface. This could be accomplished by EIGRP, but you can check if the adjacency is built. As a test, what happens if you add a static route saying (reach remote LAN, sending traffic to the tunnel interface). Check if the GRE tunnel comes up with sh interface tunnel Federico. Cisco VPN Client and Windows XP VPN Client IPSec to ASA I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config. PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems? Config is: ! interface GigabitEthernet0/2.30 Description remote access VLAN 30 nameif remote access security-level 0 IP 85.*. *. 1 255.255.255.0 ! access-list 110 scope ip allow a whole NAT list extended access permit tcp any host 10.254.17.10 eq ssh NAT list extended access permit tcp any host 10.254.17.26 eq ssh access-list extended ip allowed any one sheep access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0 tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0 flow-export destination inside-Bct 192.168.1.27 9996 IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0 ARP timeout 14400 global (outside-Baku) 1 interface global (outside-Ganja) interface 2 NAT (inside-Bct) 0 access-list sheep-vpn NAT (inside-Bct) 1 access list nat NAT (inside-Bct) 2-nat-ganja access list Access-group rdp on interface outside-Ganja ! Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2 Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1 Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1 Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1 Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1 Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1 Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1 Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1 Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1 dynamic-access-policy-registration DfltAccessPolicy Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT Crypto ipsec transform-set newset aes - esp esp-md5-hmac Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans Crypto ipsec transform-set vpnclienttrans transport mode Crypto ipsec transform-set esp-3des esp-md5-hmac raccess life crypto ipsec security association seconds 214748364 Crypto ipsec kilobytes of life security-association 214748364 raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1 card crypto interface for remote access vpnclientmap crypto isakmp identity address ISAKMP crypto enable vpntest ISAKMP crypto enable outside-Baku ISAKMP crypto enable outside-Ganja crypto ISAKMP enable remote access ISAKMP crypto enable Interior-Bct crypto ISAKMP policy 30 preshared authentication 3des encryption md5 hash Group 2 life 86400 No encryption isakmp nat-traversal No vpn-addr-assign aaa Telnet timeout 5 SSH 192.168.1.0 255.255.255.192 outside Baku SSH 10.254.17.26 255.255.255.255 outside Baku SSH 10.254.17.18 255.255.255.255 outside Baku SSH 10.254.17.10 255.255.255.255 outside Baku SSH 10.254.17.26 255.255.255.255 outside-Ganja SSH 10.254.17.18 255.255.255.255 outside-Ganja SSH 10.254.17.10 255.255.255.255 outside-Ganja SSH 192.168.1.0 255.255.255.192 Interior-Bct internal vpn group policy attributes of vpn group policy value of DNS-server 192.168.1.3 Protocol-tunnel-VPN IPSec l2tp ipsec Split-tunnel-policy tunnelspecified Split-tunnel-network-list value split tunnel BCT.AZ value by default-field attributes global-tunnel-group DefaultRAGroup raccess address pool
Group-RADIUS authentication server Group Policy - by default-vpn IPSec-attributes tunnel-group DefaultRAGroup pre-shared-key *. Hello For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key. Please see configuration below: http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
or Please see the section of tunnel-group config of the SAA. There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name. So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client. Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA. "crypto isakmp nat-traversal. Thirdly, change the transformation of the value raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map Let me know the result. Thank you Gilbert VPN/IPSec-L2L - Question? Hello! Recently, I was doing some troubleshooting on a connection VPN/IPSec Lan-to-Lan between a Cisco PIX515E and a Linux firewall. My question concerns the configuration and is not the problem itself. Traffic interesting (encrypted traffic) defined and configured the LAN of PIX (inside) and the distance public IP? Which means that the Peer IKE and the interesting remote control LAN/IP are the same... and it works! Any ideas? Thank you JP As long as you source the package from the local network of Pix to remote public IP, the tunnel will work well and works :-) So, if you really look at the fluidity of the traffic, you're sourcing traffic from Pix LAN intended to public IP remote that corresponds to the defined access list. Thus, the pix knows he has encrypt traffic and now seeks the cryptographic endpoint points (pix outside IP public IP remotely) and sends the encrypted packets. So, this configuration works perfectly. In fact, Pix will not allow Telnet the external of the pix interface unless the traffic is through an IPSEC Tunnel and it was one of the establishment who gave a telnet access to the external interface of the Pix, it's LAN to the public IP of Pix through an IPSEC Tunnel. Kind regards Arul * Please note all useful messages *. Router vpn site to site PIX and vpn client I have two on one interface on the pix vpn connections that terminate VPN. client vpn and VPN site-to-site have passed phase one and two and decrypt and encrypt the packets. However as in another post I can not ping through the l2l vpn. I checked this isn't a nat problem a nd two NAT 0 on the pix and the NAT on the router access lists work correctly. ISAKMP crypto RTR #show its IPv6 Crypto ISAKMP Security Association local ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0) local crypto endpt. : 89.x.x.x, remote Start crypto. : 66.x.x.x SAS of the esp on arrival: the arrival ah sas: SAS of the CFP on arrival: outgoing esp sas: outgoing ah sas: outgoing CFP sas: Expand the IP NAT access list I looked on the internet and that it points to a routing error when packets are being encrypted and decrypted, but you can't do a ping on the binding. However when I test the connection I did not enter any of the static routes that networks are connected directly on each side of the pix and the router. any help would be a preciated as I think there's maybe something is blocking the ping to reach the internal network at the end of pix with a configured access list. is ping failure of the only thing between the site to site VPN? and assuming that all other traffic works fine since it decrypts and encrypts the packets. If it's just ping, then activate pls what follows on the PIX: If it is version 6.3 and below: fixup protocol icmp If it is version 7.0 and higher: select "inspect icmp" under your political map of the world. Config complete hand and on the other could help determine if it's a configuration problem or another problem. ASA 5505 VPN to IPSec website DOES NOT CONNECT I spent 2 days already to try to get 2 ASA 5505 to connect by using an IPSec vpn tunnel. I can't understand what im doing wrong, I'm using 192.168.97.0 and 192.168.100.0 as my internal networks that I am trying to connect via a link directly connected on the outside with 50.1.1.1 and 50.1.1.2 interfaces such as addresses (all 24). I also tried with and without active NAT. Here is for both of the ASA configs, the vpn config was conducted by the ASDM, but I also tried the approach of the command-line without success. I followed various guides to the letter online, starting with an empty config and factory default. I also tried the IOS 8.4. ASA 8.3 Version (2) ! VIC hostname activate 8Ry2YjIyt7RRXU24 encrypted password 2KFQnbNIdI.2KYOU encrypted passwd names of ! interface Vlan1 nameif inside security-level 100 IP 192.168.97.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 IP 50.1.1.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 Shutdown ! interface Ethernet0/3 Shutdown ! interface Ethernet0/4 Shutdown ! interface Ethernet0/5 Shutdown ! interface Ethernet0/6 Shutdown ! interface Ethernet0/7 Shutdown ! boot system Disk0: / asa832 - k8.bin passive FTP mode pager lines 24 Within 1500 MTU Outside 1500 MTU ICMP unreachable rate-limit 1 burst-size 1 don't allow no asdm history ARP timeout 14400 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-registration DfltAccessPolicy Enable http server http 192.168.97.0 255.255.255.0 inside No snmp server location No snmp Server contact life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association Telnet timeout 5 SSH timeout 5 Console timeout 0 a basic threat threat detection Statistics-list of access threat detection no statistical threat detection tcp-interception WebVPN ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters maximum message length automatic of customer message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras Review the ip options inspect the netbios inspect the rsh inspect the rtsp inspect the skinny inspect esmtp inspect sqlnet inspect sunrpc inspect the tftp inspect the sip inspect xdmcp ! global service-policy global_policy context of prompt hostname call-home Profile of CiscoTAC-1 no active account http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email address of destination [email protected] / * / destination-mode http transport Subscribe to alert-group diagnosis Subscribe to alert-group environment Subscribe to alert-group monthly periodic inventory monthly periodicals to subscribe to alert-group configuration daily periodic subscribe to alert-group telemetry Cryptochecksum:4745f7cd76c82340ba1e7920dbfd2395 ASA 8.3 Version (2) ! hostname QLD
activate 8Ry2YjIyt7RRXU24 encrypted password 2KFQnbNIdI.2KYOU encrypted passwd names of ! interface Vlan1 nameif inside security-level 100 IP 192.168.100.1 address 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 IP 50.1.1.2 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 Shutdown
! interface Ethernet0/3 Shutdown ! interface Ethernet0/4 Shutdown ! interface Ethernet0/5 Shutdown ! interface Ethernet0/6 Shutdown ! interface Ethernet0/7 Shutdown ! passive FTP mode network of the SITEA object 192.168.97.0 subnet 255.255.255.0 network of the NETWORK_OBJ_192.168.100.0_24 object 255.255.255.0 subnet 192.168.100.0 outside_1_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 object SITEA pager lines 24 Within 1500 MTU Outside 1500 MTU ICMP unreachable rate-limit 1 burst-size 1 don't allow no asdm history ARP timeout 14400 NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 static destination SITEA SITEA Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-registration DfltAccessPolicy Enable http server http 192.168.100.0 255.255.255.0 inside No snmp server location No snmp Server contact Server enable SNMP traps snmp authentication linkup, linkdown cold start Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association card crypto outside_map 1 match address outside_1_cryptomap card crypto outside_map 1 set pfs Group1 peer set card crypto outside_map 1 50.1.1.1 card crypto outside_map 1 set of transformation-ESP-3DES-SHA outside_map interface card crypto outside crypto ISAKMP allow outside crypto ISAKMP policy 10 preshared authentication 3des encryption sha hash Group 2 life 86400 crypto ISAKMP policy 65535 preshared authentication 3des encryption sha hash Group 2 life 86400 Telnet timeout 5 SSH timeout 5 Console timeout 0 a basic threat threat detection Statistics-list of access threat detection no statistical threat detection tcp-interception WebVPN tunnel-group 50.1.1.1 type ipsec-l2l IPSec-attributes tunnel-group 50.1.1.1 pre-shared key *. ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters maximum message length automatic of customer message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras Review the ip options inspect the netbios inspect the rsh inspect the rtsp inspect the skinny inspect esmtp inspect sqlnet inspect sunrpc inspect the tftp inspect the sip inspect xdmcp ! global service-policy global_policy context of prompt hostname call-home Profile of CiscoTAC-1 no active account http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email address of destination [email protected] / * / destination-mode http transport Subscribe to alert-group diagnosis Subscribe to alert-group environment Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration daily periodic subscribe to alert-group telemetry Cryptochecksum:d987f3446fe780ab5fbb9d4213b3adff : end Hello Mitchell, Thanks for letting us know the resolution of this topic. Please answer the question as answered so future users can learn from this topic. Kind regards Julio I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear? Satellite M645-6114 - ECO utility/media buttons not working not My toshiba satellite M645-6114 is about a month.Yesterday, I realized that the media buttons is no longer give me a symbol on the screen when I disable or turn off the wifi. In addition, the place of the arrow button no longer turns the lights on the Find the time delay between two signals In this code, I sent you a pulse in the acquisition of data using labview. The pulse triggers a thermistor to another analog input input data. I want to find the delay between the time of the positive edge of the switch, and the exact time of the DAQ A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175) Ask to install after being installed. When I start my PC, I get a message that windows update takes place with 0% complete. This display remains unchanged in the 0% complete, 10 minutes and finally this process seems to be abandoned and I am able to login normally. When I turn off, I a
Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE SA proposal # 1, turn # 1 entry IKE acceptable Matches # 3 overall
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, status of automatic NAT detection: remote endpoint IS behind a NAT device this end is NOT behind a NAT device
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, previously allocated memory of liberation for permission-dn-attributes
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, PHASE 1 COMPLETED
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, for this connection Keep-alive type: None
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, Keep-alives configured on, but the peer does not support persistent (type = None)
Sep 03 02:09:33 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, timer to generate a new key to start P1: 21600 seconds.
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, detected L2TP/IPSec session.
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, QM IsRekeyed its not found old addr
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =...
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa181b866).
Sep 03 02:09:33 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, case of mistaken IKE responder QM WSF (struct & 0x501c1f0)
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, peer table correlator Removing failed, no match!
Sep 03 02:09:33 [IKEv1]: ignoring msg SA brand with Iddm 204910592 dead because ITS removal
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, Oakley proposal is acceptable
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE SA proposal # 1, turn # 1 entry IKE acceptable Matches # 3 overall
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, status of automatic NAT detection: remote endpoint IS behind a NAT device this end is NOT behind a NAT device
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, previously allocated memory of liberation for permission-dn-attributes
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, PHASE 1 COMPLETED
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, for this connection Keep-alive type: None
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, Keep-alives configured on, but the peer does not support persistent (type = None)
Sep 03 02:10:05 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, timer to generate a new key to start P1: 21600 seconds.
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, detected L2TP/IPSec session.
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, QM IsRekeyed its not found old addr
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =...
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa5db9562).
Sep 03 02:10:05 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, case of mistaken IKE responder QM WSF (struct & 0x501c1f0)
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, peer table correlator Removing failed, no match!
Sep 03 02:10:05 [IKEv1]: ignoring msg SA brand with Iddm 204914688 dead because ITS removal
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa5db9562).Similar Questions
65719DB4 (192.168.98.6:59936)-online (96.51.x.x:4500) SIS_OPEN udp sessionI'm trying to connect two ASA 5505s for a IPSec L2L VPN. They can connect, but not pass traffic from the AnyConnect subnet. I've added the config from ASA-2, with the LAN subnet of 192.168.138.0 and a subnet of 192.168.238.0 for AnyConnect client. I'm trying to get the AnyConnect Clients access to the 192.168.137.0 LAN behind ASA-1 at 1.1.1.1. Having both 192.168.238.0 and 192.168.138.0 both access 192.168.137.0 is acceptable. There's probably a lot of cruft in this config, as I've been reading all over forums and docs without much success. Can someone point me in the right direction? : ASA Version 8.2(1) ! hostname asa-wal names name 192.168.238.0 anyconnect-vpn ! interface Vlan1 nameif inside security-level 100 ip address 192.168.138.1 255.255.255.0 ! interface Vlan11 mac-address c03f.0e3b.1923 nameif outside security-level 0 ip address 2.2.2.2 255.255.255.248 ! same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service Munin tcp-udp port-object eq 4949 object-group service Webmin tcp port-object eq 10000 access-list inside_nat0_outbound extended permit ip 192.168.138.0 255.255.255.0 any access-list icmp_ping extended permit icmp any any echo-reply access-list icmp_ping extended permit ip 192.168.138.0 255.255.255.0 any access-list split-tunnel standard permit 192.168.138.0 255.255.255.0 access-list 100 extended permit icmp any any echo-reply access-list 100 extended permit icmp any any time-exceeded access-list 100 extended permit icmp any any unreachable access-list NO_NAT extended permit ip anyconnect-vpn 255.255.255.0 any access-list NONAT extended permit ip 192.168.138.0 255.255.255.0 anyconnect-vpn 255.255.255.0 access-list outside_access_in extended permit tcp any interface outside eq ssh access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit tcp 192.168.137.0 255.255.255.0 anyconnect-vpn 255.255.255.0 access-list outside_1_cryptomap extended permit ip anyconnect-vpn 255.255.255.0 192.168.137.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 192.168.138.0 255.255.255.0 anyconnect-vpn 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip anyconnect-vpn 255.255.255.0 192.168.137.0 255.255.255.0 access-list LAN_Traffic extended permit ip anyconnect-vpn 255.255.255.0 192.168.137.0 255.255.255.0 access-list vpn_nonat extended permit ip anyconnect-vpn 255.255.255.0 192.168.137.0 255.255.255.0 ip local pool AnyConnect 192.168.238.101-192.168.238.125 mask 255.255.255.0 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 2 access-list vpn_nonat nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface ssh 192.168.138.4 ssh netmask 255.255.255.255 access-group icmp_ping in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 2.2.2.1 1 dynamic-access-policy-record DfltAccessPolicy network-acl inside_nat0_outbound network-acl NO_NAT aaa authentication ssh console LOCAL http server enable http bobx-vpn 255.255.255.0 inside http 192.168.137.0 255.255.255.0 inside http 192.168.1.104 255.255.255.255 inside http 192.168.138.0 255.255.255.0 inside http anyconnect-vpn 255.255.255.0 inside http redirect outside 80 no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set Wal2Box esp-aes-256 esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 98.110.179.36 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map Wal2Box 1 match address LAN_Traffic crypto map Wal2Box 1 set peer 98.110.179.36 crypto map Wal2Box 1 set transform-set Wal2Box crypto map Wal2Box interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 5 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 10 authentication pre-share encryption des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 22 telnet timeout 5 ssh 192.168.138.0 255.255.255.0 inside ssh timeout 30 console timeout 0 management-access inside dhcpd dns 8.8.8.8 8.8.4.4 dhcpd auto_config outside ! dhcpd address 192.168.138.101-192.168.138.132 inside dhcpd dns 8.8.8.8 8.8.4.4 interface inside dhcpd lease 86400 interface inside dhcpd domain inc.internal interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 129.6.15.29 ntp server 129.6.15.28 prefer webvpn enable inside enable outside anyconnect-essentials svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable tunnel-group-list enable group-policy DfltGrpPolicy attributes vpn-filter value NO_NAT vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-network-list value split-tunnel webvpn svc compression deflate group-policy Wal-AnyConnect internal group-policy Wal-AnyConnect attributes split-tunnel-policy tunnelspecified split-tunnel-network-list value split-tunnel tunnel-group DefaultRAGroup general-attributes address-pool AnyConnect default-group-policy Wal-AnyConnect strip-realm strip-group tunnel-group AnyConnectClientProfile type remote-access tunnel-group AnyConnectClientProfile general-attributes address-pool AnyConnect default-group-policy Wal-AnyConnect tunnel-group AnyConnectClientProfile webvpn-attributes group-alias AnyConnectVPNClient enable tunnel-group 1.1.1.1 type ipsec-l2l tunnel-group 1.1.1.1 ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic ! ! policy-map global-policy class global-class inspect pptp ! Cryptochecksum:762f0186ad987cda4b450f6b4929cb60 : end
!
Select the 5 secret goat.
!
username 7 privilege 15 password badger badger
iomem 15 memory size
IP subnet zero
!
!
no ip domain-lookup
IP - test.local domain name
!
property intellectual ssh delay 30
property intellectual ssh authentication-2 retries
!
crypto ISAKMP policy 5
md5 hash
preshared authentication
Group 2
ISAKMP crypto key VPN2VPN address 83.1.16.1
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp - esp-md5-hmac VPN
!
crypto map 5 VPN ipsec-isakmp
defined by peer 83.1.16.1
PFS group2 Set
match address VPN
!
call the rsvp-sync
!
interface Loopback10
20.0.2.2 the IP 255.255.255.255
!
interface Tunnel0
bandwidth 1544000
20.0.0.1 IP address 255.255.255.0
source of Loopback10 tunnel
tunnel destination 20.0.2.1
!
interface FastEthernet0/0
Description * inside the LAN CONNECTION *.
address 192.168.20.1 255.255.255.0
IP nat inside
automatic duplex
automatic speed
!
interface Serial0/0
Description * INTERNET ACCESS *.
IP 88.12.45.1 255.255.255.252
NAT outside IP
VPN crypto card
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
Router eigrp 1
network 20.0.0.0
No Auto-resume
!
overload of IP nat inside source list NAT interface Serial0/0
IP classless
IP route 0.0.0.0 0.0.0.0 Serial0/0
no ip address of the http server
!
!
NAT extended IP access list
deny ip 192.168.20.0 0.0.0.255 192.168.200.0 0.0.0.255
deny ip 192.168.20.0 0.0.0.255 192.168.300.0 0.0.0.255
deny ip 192.168.20.0 0.0.0.255 192.168.100.0 0.0.0.255
ip licensing 192.168.20.0 0.0.0.255 any
list of IP - VPN access scope
permit ip host 20.0.2.2 20.0.2.1
!
!
pixfirewall hostname
names of
name 20.0.2.2 B_LOOP
name 88.12.45.1 B_WANIP
!
interface Ethernet0
Description * LINK to ISP *.
nameif outside
security-level 0
IP 83.1.16.1 255.255.255.252
!
interface Ethernet1
Description * LINK TO LAN *.
nameif inside
security-level 100
IP 192.168.50.1 255.255.255.252
!
passive FTP mode
the ROUTER_LOOPS object-group network
network-object 20.0.2.0 255.255.255.252
access allowed extended VPN ip host 20.0.2.1 B_LOOP list
access-list extended SHEEP permit ip host 20.0.2.1 ROUTER_LOOPS object-group
Access ip allowed any one extended list ACL_OUT
pager lines 24
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global (1 interface external)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 192.168.50.0 255.255.255.252
NAT (inside) 1 192.168.50.0 255.255.255.0
Access to the interface inside group ACL_OUT
Route outside 0.0.0.0 0.0.0.0 83.1.16.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-md5-hmac VPN
86400 seconds, duration of life crypto ipsec security association
VPN 5 crypto card matches the VPN address
card crypto VPN 5 set pfs
card crypto VPN 5 set peer B_WANIP
VPN 5 value transform-set VPN crypto card
card crypto VPN 5 defined security-association life seconds 28800
card crypto VPN outside interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
tunnel-group 88.12.45.1 type ipsec-l2l
IPSec-attributes tunnel-group 88.12.45.1
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
66.x.x.x 89.x.x.x QM_IDLE 2001 0 ACTIVE
Remote ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
current_peer 66.x.x.x port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 23583, #pkts encrypt: 23583 #pkts digest: 23583
#pkts decaps: 18236, #pkts decrypt: 18236, #pkts check: 18236
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 40, #recv errors 0
Path mtu 1380, ip mtu 1380, ip mtu BID Dialer0
current outbound SPI: 0xC4BAC5E (206285918)
SPI: 0xD7848FB (225986811)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 3, flow_id: Motorola SEC 1.0:3, card crypto: PIX_MAP
calendar of his: service life remaining (k/s) key: (4573083/78319)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE
SPI: 0xC4BAC5E (206285918)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 4, flow_id: Motorola SEC 1.0:4, card crypto: PIX_MAP
calendar of his: service life remaining (k/s) key: (4572001/78319)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE
10 deny ip 192.168.2.0 0.0.0.255 192.168.10.0 0.0.0.255 (21396 matches)
20 permit ip 192.168.2.0 0.0.0.255 everything (362 matches)
Expand the IP VPN_ACCESS access list
10 permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255 (39724 matches)
ASA 1 Config
Config ASA2
Maybe you are looking for