priner not selected on the computer

Similar Questions

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• The copy function blocks computer after an item is selected, and the computer is responsible for copy

  Original title: copy function

  The copy function blocks computer after an item is selected, and the computer is responsible for copy. It does not matter what size is the copy area. It usually requires a reboot hard to use the system.

  I tried to follow some of the instructions in a full Clipboard and unfortunately that is not the forms of the English spoken by them.

  Any help would be greatly appreciated.

  Denver

  d2n1cart@hotmail'com

  Hello

  We are pleased to know that the problem is solved. Let us know if face you any problem with Windows in the future.

• When you delete a file in Vista, the dialog box remove does not close until the computer is restarted

  When you delete a file in Windows Vista, the dialog box remove don't close until the computer is restarted. It is sometimes possible to remove it by closing tha task list. When this is done, the Explorer is closed and restarted.

  Hi Brian,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• Update is downloaded, do not re-start the computer.

  After that download of the update the computer remains frozen, it never restarts and if the pointer I can see my notifications and stickers.

  Hi Alex_enko,

  If you are unable to complete the installation of the El Capitan, here are a few things to try:

  Open the Mac App Store, click on the purchase tab and see what the status of your download.  If the download is interrupted, you can take.

  Once the download is complete, check to see if the file 'install OS X El Capitan' is in the Applications folder.  If this is the case, double-click the file to open it and run the Setup program.  This application is removed from the Applications folder once the installation is complete.

  If the installation does not complete, restart the computer using safe mode and try again.  Here are some links with information about these processes.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Resume interrupted iTunes Store downloads
  https://support.Apple.com/en-us/HT204312

  Try safe mode if your Mac does not end commissioning
  https://support.Apple.com/en-us/HT201262

  Take care

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Direct 3D is not available, because the computer is locked.fix it how? Installing ME2

  try to install ME2

  Hi MervH,

  Thanks for asking this question to Microsoft Community.

  If I understand correctly, you are not able to install ME2. Before we begin, I have to ask you a few questions.

  1. which version of the Windows operating system is installed on the computer?

  2. What is the exact error message you get?

  3 are logged as administrator?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Here's an article that talks of Direct 3D is not available. Go through it and tell us if it helps.

  If you perform the steps to start computer in a bun restart not forget return the computer to a normal start by following the steps described under How to regain a normal Windows startup mode.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help you.

• Digital mp3 player is not detected on the computer.

  Original title: my phone dosnt recognize my drive digital mp3. When I plug it into the usb port do not get an icon. so I can't load music can help you

  MY LAPTOP DOES NOT RECOGNIZE MY MP3 DIGITAL PLAYER. WHEN I PLUG IT INTO THE USB PORT I DON'T GET THE USUAL ICON. SO I CAN'T DOWNLOAD MUSIC ON IT. CAN YOU HELP ME PLEASE

  Hello

  Thanks for posting your question in the Microsoft Community Forums!

  If I understand the question, digital mp3 player is not detected on the computer. Please let me know if this is not correct.

  Before I continue with the troubleshooting steps I may need a few more details to better understand the issue.
  1. what operating system do you use?
  2. do you receive any error messages?
  3. are you having the same problem with other USB devices?
  4. have you tried plugging the machine into the other USB Ports?
  5. did you of recent changes on the computer before this problem?
  6. What is the serial number and model of the MP3 player?
  Method 1:
  We will first try to plug in other USB Ports and on another computer to make sure that there is no problem with the digital mp3 player.
  Method 2:
  If the first method does not resolve the problem, run the hardware and devices Troubleshooter and check if it helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
  For more information, please see the link.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Respond with the required information so that we can help you solve the problem.

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Lumia 710 Nokia is not recognized by the computer

  Lumia 710 Nokia is not recognized by the computer

  Hi sagarxx,

  Have you installed the Zune software?  Take a look on this link down:

  http://www.Nokia.com/us-en/support/product/lumia710/downloads/

  Keep in mind the following:

  Software Zune will not work on versions of Windows prior to Windows XP SP3. Download Windows XP SP3.

  I hope this helps!

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• suddenly, I could not print because the computer cannot identify the printer

  Original title: printers

  I have windows XP Professional and a printer is connected to my PC, all of a sudden I could not print because the computer is unable to identify the printer. I unplugged the printer and plugged again and I turned off the computer, as I went to adding hardware but without success. could you please tell me how to restore the printer connection. In addition, the printer icon appears at all when I plug the printer cable

  Hello

  I suggest you run the difficulty mentioned in the link below:

  http://support.Microsoft.com/mats/printing_problems/en-us

  Alternatively, you can follow the steps mentioned in the link below to fix the issue:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this helps