Print area setting of the printer - brightness slider module

Similar Questions

• Thunderbird displays only the text in the messages received or sent, even if the options are set for the HTML pages.

  Using Thunderbird 25.6.0, running on W7 - 64-bit.
  Have used the T-bird constantly since it was morph'ed from Netscape Communicator, so feel I understand basis, including the specification HTML or text/HTML options.

  A user Windows, Thunderbird account works perfectly, for the second user of Windows, all Thunderbird email accounts (4-a profile of T-bird) suddenly transformed to send and receive all messages in text only.

  I regularly compose messages in HTML format, using the wide range of fonts, colors, embedded graphics. The compositions remain intact (HTML) until the moment where I send them. The copy in my "sent" folder is in the text; one of the graphics incorporated in my original will be attached, and all the others will be gone. If my recipient respond or forward the message to me, all of my original material is text, as well as all my recipient adds to his response.

  In addition, all original incoming messages of my correspondents are in simple text. Not a sign of HTML anywhere unless I have to compose a message, or a message saved in my drafts folder.

  What is the problem and how can I solve this problem?

  Dean Jones

  NO, I ask a question. I was NOT choosing my question as a solution to my question.

  Usually, when I start new topics, I am taken in part because it's something twice 6 months ago.

  I have no solution. I have a problem. I'll start a new topic

• Latency of PE T320 Hyper-V hosts that are set by the BIOS update to the host

  Twice now, I got the prompt Exchange 2010 on my W2K8 Standard Server with Hyper-V suddenly suffer a massive amount of latency and become virtually locked out of the blue.  After hours of troubleshooting, restart and research - as a last-ditch effort I noticed that the BIOS is outdated.  I update of the BIOS and then as magically everything works again.

  Anywhere from 2 to 4 months to go and rinse & repeat.

  I'm going out on a limb here, but I suspect that there is something about the system that gets flushed out during an update of the bios that is the cause of the problem, but I am at a loss to determine what is.  I want to avoid proactively with the server my client Exchange fail, but it goes against my better judgment to apply updates BIOS proactively.  We had the motherboard already toggled because of a bad DRAC, and the problem continues to be.

  I could use help to identify what I can do to prevent this from happening in the future.  TIA

  Well we have not seen the question back at all since we changed the system of "Performance per Watt" profile to 'Performance '.  I would start there first.  It is three months and none of our T320 do more.  We are sure, it's the 90 percent solution.

• Change the color setting for the monitor at a resolution of the screen

  Why have I not change the colors to true color (32 bit) to high color (16 bit) in order to have a clear view for some of the programs?

  Hello

  Your problem with clear display is not related in large part to the quality of the colors

  I guess you have Win 7. Let's check some settings of

  • Your resolution is set correctly? Go to display properties and check the resolution are set at the recommended.
  • Set your level of color quality 32 bit true color
  • Click on Start, and then click Control Panel option. Click view to open the options screen to change the size of screen text on Windows 7 operating system. Check if Smaller - 100% (default) is selected.
  • Check the ppp settings go to set custom text (PPP) size and check if the value is 100%, and use Windows XP style DPI is checked.

  What programs do not display correctly?

  Please publish results.

  Best regards

  Andrew

• right side of the document will print all the text. All the margins are set to zero

  Right side of the document (last 1/2 ") does not print the text. All margins are set to 0.

  Please help my overwhelmed brain. Thank you

  Your printer can also be limited you.

  You could reduce your page and see if it picks up all this.

  See also, perhaps questions

  Cannot change margins in page 5.2

  Why can't I change the right margin in the Pages?

• cartridge Q7516A: new cartridge Q7516A print in grey color. Is it possible to set on the body of the cell?

  New cartridge Q7516A prints light grey color. Is it possible to set on the body of the cell? The previous cartridge printed in black.

  Even if the results are evidence of failure with new toner cartrdiges, but it is best validated once the same thing with the help of your regional HP technical supports that will also help you open the request of changing cartridge toner under the applicable warranty.

• All-in-one HP Deskjet 2541: whenever I have something to print there are spaces at the end of the paper.

  So I had this problem since I bought the printer. Whenever I print photos or documents, anything, there always seems to be a white border at the each end of the paper in a horizontal position. a bit like the printer just abandoned at the end of printing. I tried to align the cartridges, but this does not seem to work and even tried to change the setting. The print alignment page prints nor for the right proportions. Sort can help guys?

  Hello

  The specific model does not support printing without margins (edge to edge), minimum margins are as follows:

  

  As you can see, 1.45 cm from the button is not a printable area and it is an expected behavior for the printer.

  You can find the specifications of paper below output:

  http://support.HP.com/us-en/document/c03811750

• Cannot print after you set up the printer

  Original title: printer

  I thought that I just installed a HP Laserjet P1102w printer. I went through all the steps in my Windows 7 under "add a printer". I went to print a test page. Nothing. I get the notice to solve problems. I went through the troubleshooting process. No problem is listed as a problem. I try to print a test page once again, nothing happens.  I get the need to solve to find them again. ??? Can / will help you?

  Hi Clinton.

  I'll be happy to help you set up your printer and I appreciate your efforts to solve the problem.

  Many printing problems are caused by material which not is not set up quite right. Here are some ideas to solve common problems with the hardware of the printer.

  I would ask to refer to the article below which will help you to configure the printer from the start and you should be able to print it after.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• New computer Windows 7 keeps waking my Brother printer, do not own, all the settings are correct on the printer?

  My new Acer computer with Windows 7 continues to wake up my Brother MFC J625DW printer, has done that with my old XP unit, does not not a clean place and all the printer settings are correct and identical forward can help them a whole?

  Hello

  I have a Brother printer and for now, it is not the same installer and it lights up occasionally. I think so
  This cleaning the inkjet.

  Mine is an all-in-one Brother MFC-J825DW.

  Maybe there is a setting in the Setup/properties of the printer driver be awakened.

  The answer will come from brother.

  Rob - SpiritX

• HP Officejet Pro X476dw: Printer will print-elements are sitting in the queue, but the unit stops before printing

  The printer starts as it will print but then stops. The elements are sitting in the queue, so they are sent to the printer. I turned on and out and unplugged to reset. No error message. Connection to the local network.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi