print on the side of 11 "paper instead of 8.5 side
Print on the side 11 "paper instead of top-down length 8.5. Should what progran I use to change the direction of printing?
You need to change your preferences to landscape to Portrait printer.
Tags: HP Printers
Similar Questions
-
OfficeJet 4500 printer prints on the side
my printer just started suddenly printing on the side instead of horizontally. Printing is much larger than what it can be. How can I change to print normally as it enables upwards & downwards on a piece of paper 8 x 10?
Hi Ray,
You can configure the printer to print the (horizontal) Portrait or landscape (on the side) in the default settings or for a particular document. The document level setting will override the default level.
Document level setting
You can select Portrait after clicking Print in the dialog box of the printer for a document level setting.
Setting the default level
Click on:
Start | Printers and devices. the icon of the printer (right click) | (left click) Printing options
Under Orientation, you can choose between Portrait or landscape mode, and then click OK. Don't forget and choose the regular printer and not the fax printer. Who help me?
-
HP 3550: Print on the side.
My printer prints on the side, how do I get it to print from top to bottom, I use it with my lenovo tablet, which is wireless.
Welcome to the Community Forum of HP.
Are you saying that your printer is printing in Landscape Orientation?
If this is the case, then perhaps the following will be helpful:
Manage the print with preview output before printing
See the section above on
You accidentally left the printing in Landscape Orientation options.
If this is the case, change your page layout tab > Orientation Portrait or automatic
Click on the Thumbs - Up Kudos to show that you appreciate the help.
Click on accept as Solution when the answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
Printer owner exactly six months and worked well. I have not changed the settings; still has ink in the cartridge; Do a test print - no problem; the cables and all connected. I click on print to the screen and the printer works and acts like it is printing, but the result when it's over is just blank paper. I tried other print jobs and got the same result - white paper
I connected the cables on another computer and got the same results. What could be the problem?
Welcome to the HP Forums, I hope that you are @lesleyco,
I came across your post about the printing of the white pages of your Officejet 3830 problem, and I wanted to tender hand for help.
Try the following steps please: impressions Printer Blank Page or not printing black or color ink
If pages continue to print Virgin, contact HP to discuss a replacement order. If you experience other symptoms, let me know and I'll do my best to help.
Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.
Have a nice day
HP technical support are available by clicking on the following link:
http://h22207.www2.HP.com/us-en/?openCLC=true
(1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
(2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
(3) Once finished, click the "Show Options" at the bottom right.
(4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.
-
Printer load the photo tray photo paper
My HP C7280 does not load paper photo 4 x 6 from the photo tray. The photo tray moves in direction the feeder, but fails to actually load the paper into the feeder. Any suggestions on how to remedy this? Thank you.
Mike
Hey,.
Please take some time and look through this document to make sure that you load the paper correctly,
http://support.HP.com/us-en/document/c01662562
These are the instructions of Macintosh, but measures to prepare for printing of the photo are the same, but they will on Windows just would ignore the instructions.
Have a great day. Getting back to me.
-
I have Vista 64 (2) operating system on HP Pavilion dv5 1125nr and prints wirelessly on a hp photosmart all-in-one 7280 printer color. Whenever I have print something, the printer sends a sheet, then printed and blank page, then prints. It's boring and useless. How can I fix it? It lasts for a long time now and I'm really tired of it. I tried so many times to solve this problem. Nothing I tried works. Help!
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
http://support.Microsoft.com/GP/printing_problems
Read the information above from Microsoft about fixing printer problems.
·
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
I have DL would be & installed the new version of BingBarSetup-partner. When I click on 'Activate' on the HP page for smart printing, the file tries to download me is "hpsmartprintbingbar_msi"! Note underscore instead of a point in the name of the file. Although IE won't let me DL the file because it does not have a legitimate file extension.
I tried several ways to get the file, but no joy!
I don't know this link, you download the .msi file, but you can get the .msi file to an average point round for download full software functionality from the link below, then simply by running the .msi. I would add as well the instructions for it below. Let me know what happens.
Starting a download:
1. run the disk cleanup on your computer
2. download and run the software and the drivers below.
http://goo.GL/jiHgM
3. once the download is done retrieve, cancel the download.
4. click on the start menu.
5. click on run.
6. type %temp% enforcement
7. Locate and open the folder starting with 7z (example: 7zS2356)
8 configuration open the folder
9. open the webprinting folder
10. run the smartwebprinting.msi -
HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?
HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change? I looked everywhere I can think of. You are my last resort.
Windows 7 ~ 64-bit
Hello
Unfortunately, this printer does NOT support duplexing (printing on both sides):
http://support.HP.com/us-en/document/c02231304
Kind regards.
-
HP officejet 4630 will not print on both sides of the paper
Unable to print on both sides of the paper. The backsideprints first, then wait for the ink to dry, front end starts to print then stops with a windows error message popping up on the screen saying cannot print the document.
I found that I can't print multiple pages either. For example, I decided to print the document of 4 pages in the form of simple pages only (since double-sided would not work) and the results were first page print second page prints on a third, and then just stop with error message this printer cannot print the pdf document. If I had to select each separately page to finnally get all four printed pages. HP print and scan diagnosis says theres no problem. Windows diagnostics says there is no problem.
Obviously there is a problem can offer advice and the solution?
Thank you
Kimoho
To all,
Thanks a lot for your suggestions. I would like to point out that the problem was solved and printer works fine.
The solution is one of the two things?
First, I opened the windows firewall and allows all applications and processes to pass through. There may be a few dozens of them, some have been verified and how some have been blocked. I checked all except those who started with 'remote '.
Second, I went on the printer software and returned the IP address of the printer. It was the same as the IP address, but somewhere on the microsoft blog, I read that windows and routers sometimes lost the IP address. That's why I'm re-entered.
I don't know which of these fixed the issue, but one of them did.
Thanks again
Kimoho
-
How to print on both sides of the paper with deskjet 9800
Hello
I'm trying to print on both sides of the paper. I have a deskjet 9800. I select two sided, but it will print one page after another. Even pages are 'upside down '.
Would appreciate help with this.
Hello
I think that it is an old printer and it MUST have a duplex unit to be able to print both side automatically if yu have to print manually (turn inside papers yourself):
Kind regards.
-
print on both sides of the paper
I have a Brother printer that is capable of printing on both sides of the paper. I have 10 Windows and the version of Adobe Reader X installed 10.1.15.
My function for printing on both sides of the paper is no longer appears on my screen printing options. I can do this on other applications, Word etc.
Any help would be appreciated
Hey leathac52847786,
Do a selection for printing on Both Sides option is the features of your printer, no drive.
You may need to make sure your printer supports duplex printing and this feature is not cut.
Please consult the following KB link doc and see about the same:
Double-sided printing. Acrobat, Reader
Let me know if this helps.
Kind regards
Ana Maria
-
When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed. I tried to shake the black toner, but nothing has changed... Should I replace the black toner?
Hey @candreas,
Welcome to the Forums of HP Support!
I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.
If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.
Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
Print on both sides of the page
For printing on both sides of the page, the instructions say to FLIP on LONG EDGE or RETURN on SHORT EDGE. WHAT WOULD BE THE CRITERIA FOR THE REVERSAL OF ONE WAY OR THE OTHER? I'm printing docs on 8-1/2 x 11 paper. 1 set of docs is 14 unique pages that I could turn it into 7 if I could print on both sides.
Instructions more tell - printer is will automatically load the back paper to print on the other side. Someone please help me understand these instructions? Thank you. Judy
> to FLIP on LONG EDGE or RETURN on SHORT EDGE.
This difference is important if you want to print portrait vs landscape.
For the first case, you usually run flip on the long side, on the side.
-
Designjet t520 36inch spit long paper instead of print
Product is HP Designjet T520 36 "tracer. 36 "roll paper installed. Printing from Adobe Acrobat, maps of large size, print to 35 "x 60". Sending of print on the drawing board causes the plotter spit a large white paper instead of print. Do you receive an error message.
Help ~ it's wasting a whole roll of paper! There is no way to cancel or suspend the plotter when it feeds large blank sheets instead of print.
We tried different settings. Updated the firmware today. Very frustrated ~ can someone help please?
I solved my problem by determining there was something wrong with this particular PDF. As another PDF of the same size and similar content files have been feeling very well, I'm focused on PDF export process.
This 'problem' PDF was created in ArcGIS. To resolve this problem, I have re-exported a new PDF, using graphics tablets vector (deflation LZW) and rasterize all symbols; the new PDF print very well.
ALSO, for anyone who uses Pipelogix with ArcGIS, make sure that your toolbar does not work properly. If you get the toolbar alerts, remove the toolbar and start a new session, before exporting a PDF file. This may sometimes cause the problem I mentioned above.
-
HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.
We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.
Any help would be appreciated.
CRI_IT_guy
When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem. To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer. If it works, then your issue is network or linked servers. Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.
Maybe you are looking for
-
Scuba diving between 0 and 50 m with Watch series 2
Public documents for diving with Apple Watch series 2 is a bit contradictory. All the data I can find claims that it is resistant to 50 m, but you shouldn't use it for scuba diving. Note 1 to the foot of the http://www.apple.com/apple-watch-series-2/
-
How can I remove the Option of address book ALL my address books?
I start a business of pharmacy of my pc, run two other e-mail accounts. Recently, I have now all address books with my total emails all handsets. THAT I'M NOT AT ALL.My address books worked as I am satisfied that three separate address book now they
-
OfficeJet Pro 8600 Utility does not show my Mac computer in the scanning settings
I use Mac Lion 10.7.4 and am unable to set up the scan function in the HP utility. Screen says no computer not connected and there is no option for a computer in the scanning settings utility. Connection to a printer is wireless.
-
Ends of updates of security with code error 80070490
Lately, all security updates installation fails to install with error code 80070490 (unknown error). Heard somewhere that it is caused by a corrupted file and can be solved by reinstalling Vista from the desktop... Tried to reinstall Vista connected
-
Of the Side-Scrolling Action-Arcade game has encountered a problem
I use Windows XP Professional Edition Service Pack 2 and that I was using this game for many years and recently I formatted my PC and now the game I am playing does not. I have uninstalled and reinstalled the game and tried everything what mentioned