Similar Questions

• HP Deskjet 3050 a J611n: scan of the computer is no longer available since windows 10 download

  After downloading windows 10 to my laptop last week surprise, I can't scan from this upgrade and get the message that the scan to the computer is no longer available. I tried different routes to make it work again in settings, but I can't get the article that will allow me to choose scan of the computer. I also seem to have something in 10 called windows webscan, I can't activate it either. Any ideas how to resolve this would be greatly appreciated.

  @loki4

  I'm sorry it doesn't - there are perhaps other issues (HP or Microsoft drivers and software) preventing to install printing software and works as expected.

  Migration from one operating system to another can be brutally hard on the file system.

  Going to bed.

  A few random ideas:

  When you try again - restart all:

  • Shut down / off everything, including the router (and all connected mobile devices) >
  • Leave the router (in condition off the coast) a few minutes > bootstrap router > wait a minute >
  • Start or computers on the network > mobile devices from start > printer start

  Remove any program of printing of programs and features

  Make sure that your Adobe Reader DC is on the latest version (and Flash, too)

  Printer's happiest with an Ethernet - and a static IP address if you have stability issues

  Run Windows updates several times after a migration; There are sometimes more than one session so that everything is loaded.   Check to see if you are ready to install the "other Microsoft" software with your Windows updates.  View history.  He tells you?  Not sure - always good to know what Microsoft adds to your system...

  Start (screen) > settings > update and security > Windows Update > Advanced Options

  If you are running McAfee security - you might need to update, reinstall it, or disable it temporarily.  (I don't really know this; I guess.)

  Switch your UAC (User Account Control) to "notify me only when apps to try to make changes...» "(slider / option second from the bottom):

  Control Panel > display icon > user accounts <> change user accounts control settings

  The troubleshooting Section:

  Occur after Windows 10 upgrade, printer problems

  User Guide

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP TouchSmart 520-1030: recovery of the disks are no longer available from the HP Support

  I am trying to help a friend who's HP TouchSmart 520-1030 hard disk is dead.  I have the HP support site, fill out forms to buy 5 DVD System Recovery Disk Set Kit for this system. He even asked for my credit card information. Only after that I entered all this information, the system told me that the recovery kit was no longer available for this system. I tried to download a Windows 7 from Microsoft, but because the key of Windows 7 has been an OEM key, they told me I'd get from HP. I called HP support and they said that they could not get the kit. I asked them if I bought a new copy of Windows 7, the drivers would be available at HP. The phone technology said he didn't know. I asked him if he could tell me how I could know, he says 'No, good night' and hung up. I was not rude or anything. Very professional, in my opinion. In any case, I'm stuck. I know that my friend should have the recovery disks, but it didn't. Does this mean that he should throw a 3 year, $750 all-n-one computer? Does anyone have any suggestions? Thanks in advance!

  If HP does no more, it is available here:

  http://www.computersurgeons.com/p-22059-Windows-7-64-bit-recovery-kit-a7c03av-for-HP-TouchSmart-desktop-PC-model-number-520-1030.aspx

• How can I check to see if my system and components are compatible with VISTA, given that the counsel is no longer available and my office will take too many changes to make it compatible with WIN 7?

  I am running WINDOWS XP on my desktop and would like it ungrade to WINDOWS VISTA, but I don't know if all my devices are compatible with WINDOWS VISTA! I would like to upgrade my desktop computer for WIN 7, but it would take too many changes, so I'm going to update my laptop for WIN 7 and I have another laptop running WIN XP! So basically I want to have at least one of the three operating systems (XP, VISTA and WIN 7) on my different computers! WIN XP on my laptop older, WINDOWS VISTA on my desktop (currently in XP) and WINDOWS 7 on my laptop latest (running VISTA)! I just want to know how to find out if there is a way to see if all my components on my desktop are compatible with WINDOWS VISTA, but the Advisor WINDOWS VISTA is no longer available? I used the WIN 7 Advisor to check what is required for me to upgrade my desktop PC to WIN 7 but there are too many changes that need to be done! I also used the WIN 7 Advisor on my new laptop and it has only a few changes that need to be done and that is why I want to upgrade my laptop to WINDOWS 7 and my desktop for WINDOWS Vista!

  Hello

  I already gave you advice available to upgrade to Vista in your other thread earlier in this forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/how-can-i-check-to-see-if-my-system-and-components/7e626228-5572-E011-8dfc-68b599b31bf5

  You should check with the manufacturers of hardware and program

  and use the Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  and read the vista system requirements

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

• How can I check to see if my system and components are compatible with WINDOWS VISTA, given that the counsel is no longer available?

  I use WIN XP as my main OS and I want to ugrade it for WIN VISTA Home Premium, but the ADVISOR WINDOWS VISTA is no longer available! How will I know if all my components are compatible with WINDOWS VISTA before I buy it?

  Hello

  You should check with the manufacturers of hardware and program

  and use the Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  and read the vista system requirements

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  __________________________________________________________________

  But Microsoft sells more than Vista.

  They switched to Windows 7

  If you are lucky, you could always find a copy of Vista to your local computer repair store

  ___________________________________________________________________

  Why not see if your device is Compatible Windows 7

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

• How to ignore the images are no longer available for licensing?

  About 80% of the images I tried to examine are marked "Licensing for this image are no longer available." Is it possible to avoid wasting so much time clicking to select and clicking to accept that the image is not available? If there were one or two, I could live with it, but respond MOST of the images in this way, so it's a huge barrier looking for usable stock.

  Thank you

  Allen

  Hi Allen,.

  If you run through this new try clear the cache of your browser and then restarting him. Let us know if it does not help.

  EBQ

• 7410 HP all-in-One: analyze the function is no longer available in the preferences using 7410 HP all-in-One

  I have a Mac Book pro running OS 10.9.5. When I select Printers and Scanners in my all-in-one HP 7410 preferences no longer displays a selection of "scan" on my Mac Book. It only shows "Open Print Queue".

  It prints very well and I know that he used to show both the choice 'print' and 'scan '. I don't know when this capacity disappeared. Does anyone know what I need to do to get this feature? I am not real computer savy if I appreciate all the help I can get.

  Hello

  Click on the Apple icon, then about this Mac, and then select software update.

  Allow it to 30 seconds, and then click the Store menu and select reload the Page.

  If there is no HP or Apple update available insall, restart your Mac and check if you can scan then.

  If the same persists, install the following package and check again:

  http://support.Apple.com/kb/dl907

  Shlomi

• Where is the installation of the previous version, which helped save the content and saute upward during the restart, is no longer available?

  During the closure of Firefox version 4 it "just closes", no option to save the displayed pages or multiple windows in... alternative now use to 'crash' the computer as the installation of "restore" then click in but frankly it is a bad option... Please bring back the option 'Save' and will bring up when the next time you use Firefox...

  Firefox 4 saves the previous session automatically, so it is no longer necessary for the dialog box asking if you want to save the current session.
  
  You can use "Firefox > history > restore previous Session ' to get the previous session at any time.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox (Tools) > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• HP 4510: Scan of the computer is no longer available on HP 4510

  My HP 4510 worked printing and scanning on my wireless router. Now, I can still print wireless but cannot scan more even if I connect cable. I tried everything I found on the internet: Uninstalling the software, scan, doctor, etc... Please notify. Mazen

  I did it. I have also directly connected to the power outlet, but did not work. I tried again after 1 hour using the power strip and it is scanning. Mazen

• Stop synchronization of windows with the file is no longer available

  How to prevent synchronization of windows trying to sync with a folder that no longer exists? I'm working on a windows XP computer that had a network folder shared on our old domain controller. It was created to "work offline". This former DC has since died, but the XP machine is still trying to synchronize with him whenever he disconnects or connects.

  I tried to delete all the files temporary/offline, I tried windows Explorer and go to tools > Synchronize and then unchecking the file that does not exist. I tried to go to the configuration of the synchronization and UN-checking the folder to synchronize when connected to the LAN. Nothing seems to prevent synchronization attempt. There are also other folders that exist that I want to keep the synchronization with, so I don't want to completely disable synchronization. Does anyone know how to make so that he can stop sync with just this file?

  Hello

  You can try the troubleshooting steps provided in the link below in case you haven't tried them already.

  How to use offline files in Windows XP
  http://support.Microsoft.com/kb/307853

  For more assistance, you can publish the isuse on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• The photos are no longer available. Just happened lately. Inadvertently to uninstall a program that is necessary for them to display?

  tried to enter in the properties > systems advanced settings > advanced > settings > Performance > Visual effects but found nothing except something thumbnails cachein.  Tried, but nothing helped. I cleaned my computer lately by some programs to uninstall.  Maybe I uninstalled that badly.

  Hello Rayshanbev,

  Welcome to the community!

  Verify that your Folder Options are set to capture the photos. You can do this:

  ·         Click Start

  ·         Click on Control Panel

  ·         Open Folder Options

  ·         Click the view tab

  ·         Uncheck the box to not cache thumbnails

  ·         Click OK

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Possibility to change the brightness of the screen is no longer available in the control panel

  original title: I cannot adjust the brightness of the screen more! Why this option disappeared suddenly from the control panel? It was fine last week.

  Every night, I turned off my screen. Suddenly last week, this option disappeared.

  Hello

  You did material recent or changes to software on your computer before this problem?

  Step 1: If the computer does not display the option to adjust the display brightness, check with the manufacturer of the computer for a BIOS updated to support this option.

  You can also try to update the drivers for hardware from the computer and check.

  BIOS WARNING
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: You can also try the system restore feature and restore so far when you were able to see the brightness of the display option in Control Panel.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  I hope this helps.

• The manuals are no longer available from the Dell Support for my ' M17x... ?

  For a long time now, I have noticed that under what support I left dell/site support when entering my service tag that details under section of manuals / the manual for my m17x had gone missing and was there is always the manual but for servicng my m17x.

  But now I see even this repair has also been removed is there anyone who knows why it happpened thanks.

  Now all of a sudden the repair appeared and so I answer my own post it seems incredible things: P

• Suddenly, Windows NOT simply allow me to create a new folder - the choice is NO longer available when I "right-click" - what happened?

  Suddenly and without any warning, I can't create a simple "new folder"; an attempt to 'right click' offers me only: 1) a folder compressed (zip), or, 2.) a Briefcase.   Why the simple "new folder" disappeared off the coast of the menu list, and HOW do I get BACK?

  If I open Explorer and try to create a new folder from there, I can "click"New folder"button all DAY, but it does NOTHING.

  What happens here?

  I am running Windows 7 and so did 15-16 months, without any real problem, so far.

  If anyone can help with this, I would CERTAINLY appreciate it.

  John Gosselin

  What happened a bit in the past, but we see a lot more often recently. Here are two options.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
  
   

• Import the link is no longer available

  As I wrote in http://communities.vmware.com/thread/289643 , I was able to resolve a previous question but remove a virtual machine from the database and then import once more.

  I had a similar problem today so I wanted to try this option first. Delete the virtual machine of the inventory was no problem, but its importation... :-(

  When I go to the data store several VMware files are only shown as type 'file', including the vmx file. When I right click on the vmx file there is no import option. :-(

  I did some update on the vCenter system but it is still a vSphere Client 4.1.0 (build 258902). In the plugin Manager, I see the vCenter converter 4.2.0. as allowed it. I have also the vCenter Converter Standalone 4.3.0 on this machine so if it's a quick fix... But how?

  Anyone know what I have to look?

  Bonno

  To make sure that this is not a problem of vCenter server, please connect to a host ESX (i) and open the browser to store data there. You get the item "Add to inventory" when you right click on the vmx file.

  André

• The page of my extraction option is no longer available, whats going on?

  The option from the page is no longer available, Im the latest pro XL. Where at - it go?

  Hi upmc.

  It should be there in the Pages pane in the tools Panel (on the right side of the application window). But, if you want to appear in the toolbar at the top of the window, then try this:

  1. Choose View > tool sets > manage sets of tools.
  2. Click on manage sets of tools.
  3. Select default tools and click on modify.
  4. Click on the Pages to expand this category and then click on the tool extract Pages.
  5. Click the 'more' in the middle of the dialog box add to the toolbar.
  6. Click Save.

  Please let us know how it goes.

  Best,

  Sara