print quality problem

Similar Questions

• Print quality problems

  I have a Photosmart HP 5510 e-All-in-one printer - B111a and currently in print quality problems.

  Whenever I have print anything print quality is terrible, but if I print a print quality diagnostics page, it is perfect. Any ideas? I finished all the diagnostic tools and cleaning tools on the printer, but it just isn't the problem.

  Hi thighto,

  My apologies, these measures failed to solve the problem for you!

  In my view, that a reset of the printer is the best thing to try. Please read this privacy statement for HP: http://bit.ly/pCUQT7 and continue to check your Inbox for the resetting.

  If the reset does not solve the problem, I would recommend that you call HP Technical Support for your area and inquire about what they can do for you at this stage.

  Have a wonderful evening

• HP LaserJet CP1525nw color print quality problems

  I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

  Hello Graf213,

  There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

  Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

  Solving print quality problems

  Perform the steps, and I would like to know the results.

• HP BIJ 2800 Win7 print quality problem

  My HP BIJ 2800 had problem on Windows 7.  This is the driver does some necessary content types of paper to select for print. As HP photo paper, inkjet paper, more and more. I can't drive by a print quality...

  Hello Zergen,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  Hope this helps, have a good!

• General photos of troubleshooting for print quality problems

  Click here to see the detailed description of the following topics for Diagnostic tools and maintenance to get the best photo prints.

  What is a quality Print diagnosis report?
  How to print a Diagnostic print quality report
  Potential problems that could appear in the report
  What to do if you see flaws on the report
  Example: Printing is spread?
  How to clean your print heads
  How to align your printer
  Find a printer HP Photosmart printer tools

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• Z5200: Q5669-67070 high corner to Z2100? Print quality problems

  Ive got a Z5200 on the bench, and he is smearing ink a litle on the edge of the paper which an effect of bands. The effect comes and goes

  I came across this Q5669-67070 part and Q5669-67075

  It is is a 'wdge extra-high PRS.

  I find no what he does - but this will help fool the problem or what will be?

  What is doing?

  Thanks Peter

  Hello

  Which is used to increase the height on the transport.

  Is recommended when using very thick media.

  First of all make sure that the media you use is supported by the printer

  Make sure that the selected media to match to the paper.

  If the thickness of the WAD is your problem.

  Also consider

  -Delaminated print heads

  -Contaminating Station Service print heads

  -Media curling upward due to its normal curvature. (If this is the case, use a new roll)

  -Spittoon left contaminant of the print heads

  -Detector Ful drop ink

• LaserJet P2055DN print quality problems

  Hi all

  New to the forum but plan on using it quite frequently as I am responsible for a large group of HP printers.  The problem I have is with a printer HP Laserjet p2055dn pritner.  I feel some ghosting along the right and left a few impressions I did some research and I * think * the fuser unit is at fault, but I wanted to ask before ordering this part.

  I ran several pages of cleaning with this printer because the problem started, and although it seems to help a little, the problem never goes away completely.  It started a few months ago and the prinouts were originally just Sales, but now they're starting to ghost.

  Hello

  The problem of ghosting is caused by the fusion station most of the time. The roll of the main user has a coating Teflon preventing toner to stick, when the door of coating you starts to become the ghost of impression that you are experiencing. You can get furnaces replacement online from many sources, just do a Google search for Fuser P2055DN.
  OR you can search the HP shopping for the same site and order it.
  http://www.shopping.HP.com/en_US/Home-Office/-/static/page-customer-services

  I hope this helps!

• m251nw: print quality problem

  I have horizontal red streaks across the top and the bottom of my printing page.  I'm only printing in black.  I tried the cleanup utility and have had no success

  Lol once it the wiper inside a toner cartridge blade breaks the toner may not be fixed.

• Printing printer F2480 problem

  Hello

  I am using HP Deskjet F2480 and problem on printing. I used the HP Print and Scan Doctor 4.6 software to diagnose the problem.

  The printing result is as below:

  

  The words, black gradient and the black lines are having to "shadow".

  I hope someone can guide me how to solve this problem.

  Thank you.

  Hi @noname9,

  Welcome to the HP Forums!

  I see that the words, black gradient and black lines have a 'ghost' with your HP Deskjet F2480 effect. I'm happy to help you!

  I suggest to go through the steps in this guide, HP Deskjet F2400 all-in-One Printer Series - troubleshooting print quality problems.

  I hope it's useful!

• want to 7640: very poor print quality photo

  Photos printed on our 7640 desire come out cloudy even if they were taken with a quality camera and displayed on the computer screen into bright colors. We have installed new ink cartridges and verified that the photo paper is loaded correctly. Are the only parameters that seem to affect the photo printing quality (normal selection or the best gives the same print quality) and "sharpen for printing" (checking and unchecking this box will give the same result). What other options are there to improve the photo print quality?

  Welcome to the community @mmk1034 HP

  I read about the problems of print quality, you're facing your craving and I wanted to burst to share my suggestions that should help you. See the link I posted for you below and try all the steps. If the quality does not improve, then dial the hotline to discuss replacement or the printer with them scoring. I'll leave the details below.

  Solving print quality problems

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• Out poor print quality

  I just bought the HP OfficeJet 6700.

  The print output is horrible.

  When I print or copy pictures or whatever it is colored, it prints very pixilated and dark.

  Does anyone else have this problem? Y at - there a solution or is this a bad printer?

  I always had HP printers and loved it... I don't like so far.

  If you are having print quality problems, it could be caused by a number of things.  I suggest trying this document.

  Let me know if it helps.

• Color LaserJet Pro 200 M251nw: bad Color Laserjet Pro 200 M251nw print quality

  Hello

  I've owned the above printer for 1 month and for the first two weeks, it worked fine. On his return from a week leave. When I now print the image resembles what I can only describe as if someone has dribbled water down causing the toners to face each other.  I cleaned and followed all the troubleshooting of things without success. I also checked the toner drums and they appear fine. Any help would be appreciated as I now seem to have a printer expensive usless

  Thank you

  Alan

  Hi @Al24,

  I read your post and see that when printing now, the image looks as if someone has dribbled water down causing him the toners to face each other. I will definitely do my best to help you.

  You use Genuine HP Toner?
  What are the levels of toner?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Run the printer calibration.
  On the configuration of the system key touch printer, print quality, color calibration calibrate now.

  Print a diagnostic Page to see if you have the same results. Trying to determine if it is a hardware or software problem.

  Go to Setup, reports, arrow down and select diagnostic report.

  

  I have a document with several steps to run a clean and check the settings of the printer driver.

  Troubleshooting print quality problems.

  Make sure the paper type is selected and no paper said.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  The test pages come out the same?

  What kind of paper do you use?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet CP1215: Color CP1215 print quality - Windows 8.1

  Systematically print very dark colors.  I printed from Word, Adobe PDF viewer and Photoshop all with the same results.   I installed new cartridges and have installed the latest driver.  Since there is no available since Windows 8.1 Toolbox - have not found any way to print the configuration page - hold the results just RESUME button in the gree light of power is flashing but nothing prints.  It seems not to be possible to print a cleaning page.  I'm at a loss what to try to fix this.

  I have downloaded and run the HP print and Scan Doctor 4.6 and everything out OK, the test print that comes out seems OK for me but I don't know what it is supposed to look like.  The cyan block seems a little light.

  Hi dsouleles,

  I see that you have problems with the dark printing. I'd love to help you.

  You can adjust the brightness in the application you are printing from, if this isn't a problem with the hardware with the printer.

  You use windows built in driver or did you download the Plug-and-Play drivers?

  HP Color LaserJet Plug-and-Play package.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Solving print quality problems. Go to eight Solution: print a configuration page. Is it printed correctly then it would be software related. Let me know the results and how to print the configuration page. Please go well the steps contained in the document. Unfortunately, you'll skip the steps of the box tool.

  If the problem is still related software, you can continue with the following steps:

  Make sure that the correct paper type is selected in the print driver and he is not in default to unspecified.

  Here is a document for the different features in the print driver. Use features in the Windows printer driver.

  What kind of paper do you use?

  Print and Scan doctor, you may have the option in the upper part, in one of the menus to run a diagnostic test, possibly cleaning and calibration of the printer. Try printing Scan Doctor for Windows and HP. Under how to use diagnostic and printer cleaning services?

  Have a great day!
  Thank you.

• Print cartridge problem

  When I print, I get these pink stripes on every inch around the page on the right side of the paper.  I cleaned the roller at the back of the printer and the cartridge is new.

  Hi fb13,.

  By your post, I see that with the new toner, you get pink on each thumb around scratches in the page on the right side of the paper.
  I'll be happy to help you.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.

  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.

  4. If you see the scratches, fingerprints or other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it.

  Print a few pages to see if the problem is resolved.

  Have you tried different paper. A bit of paper causes this.
  Use paper that is designed for use with laser printers. Don't use paper that is designed only for use with ink jet printers.
  Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

  I have provided a document through the steps to see if it will solve this problem.

  Solving print quality problems.

  Make sure you do six/eight/nine/ten of Solution.

  Run a cleaning page through the printer. Just use regular paper.

  In the Windows notification area, right-click on the icon of the device settings, and then click the name of the product.

  NOTE: The Windows notification area is at the bottom right of your computer.

  Click the device settings tab, and then click cleaning Page.
  The cleaning process takes about two minutes.

  The cleaning page periodically stops during the cleaning process.

  Do not put off the printer until the cleaning process is completed.

  You need to repeat the cleaning process several times to clean the printer.

  What are the results of the report printing configuration? (stripes pink)

  What are the colors for the pink and in front of the pink squares squares, they are orange?

  What kind of paper do you use?

  Are you using genuine HP Toners?

  Please let me know the results.

  Thanks for posting on the HP Forums.
  Good day!