Printer Canon does not respond.
This Folio HP with Windows 7 does not detect my Canon MX726 more. It is used to do it until yesterday... The other PC (XP) I have no problem, so I know that the printer wireless connectivity is OK. He tried several fixes as reinstalling the drivers but still can not detect. I tried the Canon IJ tool but the printer is not found. If I put a USB cable, then it is fine. I really wonder what is the question.
I thank Naman. I hesitate to reinstall the printer because, during the installation, it will ask you to connect to the printer (via WiFi), and if she can't do it, I'll be stuck.
What I understand, that's why I can't ping the IP address of the printer on my network SSID... I know the address through the other XP PC. On the other PC, no problem at all when you type the IP address in a browser. On this one, ping displays no value, it is not detected. Which can block the IP address to be detected, so that was the case days ago? Any piece of networking?
Your
Alain
I solved the issue after reading on the networks. It was a network problem. This PC is connected to a relay router that I use for the second floor (I realized that when it would be only ping LAN connections but not wireless devices and also it has lost its internet connection when I disconnected the main router LAN cable). I disconnected from the PC to the router and removed this network. The printer is now online again. I don't know why the children upstairs which always connect to the relay have no problem but I am not an expert in network... I'm happy that I'm not following advice from here.
Concerning
Alain
Tags: Windows
Similar Questions
-
My canon iP4300 not work on64 bit XP said ' print spooler does not.
I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?
Hello
Step 1: I suggest you to download and install the driver appropriate from the following link:
http://software.Canon-Europe.com/products/0010386.asp
Step 2: Try the procedure described in the following article:
"You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894
-
Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.
Is what brand and model of printer?
I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.
-
Canon mp530 printer/scanner does not work since the latest version of windows update
from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.
any ideas?
Hello
After windows update did you check in Device Manager is there any yellow mark on any driver?
Go to the device by right clicking on computer Manager and manage
Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID
Let windows to be opened and take note of the VEN ID and DEV ID
Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required
Look for the driver at Google or bing or other for a good
-
My canon printer mx420 does not see my router to access point
My canon printer mx420 does not see my router to access point. What can I do about it.
Hello Rick,
I went online on the website of Canon, and there were 25 games for "printer sees router access point; you might want to try this page: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx420?CMD=MIXED_SEARCH&mName=PIXMA+MX420&mType=PIXMA+MX&pageKeyCode=ekbresults&searchString=doesn't+see+router+access+point&BASIC_SEARCH_CURRENT_TOPIC_ID=1076&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false .
If you have no luck after visiting the Canon site, post back here with what you tried, and we'll go from there. I hope this helps you.
Kind regards
BearPup
-
I requested a copy of the document, but the printer does not respond.
HPofficejet5610all-in-one, I placed a doc in demand, but the printer does not respond. My icon shows document it and printer status says ready. I even changed the ports, but nothing happens. When I checked on what Control Panel first shows for printers, it showed 4 printers (1 copy), then a fax (copy1). I went to default the copy1 (that computer (windows 7) placed the doc in and still does not have the printer.) The usb cable be bad?
Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.
-
HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake
Hi all
Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.
But... When I try to do something after the machine is in "standby mode" everything goes wrong.
1 - printing takes longer path to front.
2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.
3 - wireless devices sometimes have trouble with the connection to the device.
4 - access to the machine via the web interface content (yet) is slower, if not impossible.
When I manually reboot the printer (using the power button) the machine works fine again.
But I can't immagine what how HP intends to use the machine.
Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?
Also is it possible to disable the sleep mode at all?
Thanks in advance.
Kind regards
By Duringshoff
The program installation/Specs:
The printer that is connected to a switch. Connected to the router (wireless).
Printer is not directly connected to any computer over the network.
On the printer, I put 'Sleep delay' to '1 hour '.
On the printer, I set 'Auto Power' down on '' never. ''
MacBook Pro 13 "under OS X 10.9.1"
Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)
IPad IOS 2 7
IPhone 4 running IOS 6
router: Cisco EPC3925
switch: Netgear GS108
Thanks for letting me know Per_Duringshoff.
I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.
10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.
Let me know when had time to try the steps listed and if it helped.
Have a nice weekend!
Thank you. -
Brother HL-2070N mono laser do not print and does not meet orders
Original title: printer will not print. Just to sit down and idling, computor can see the printer, but the printer does not respond to commands
Brother HL-2070N mono laser printer
Hi BillSpiers,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
3. you receive messages or error codes?
You can check out the following link and check if it helps to solve the problem.
Hope this information is helpful
-
I'm unable to install a printer - print spooler does not
I have a problem with the PC. No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work. Can I also book error code: "error 0x000006e". I tried all the usual bugs without success. Gives the print spooler to think it's on; I have reset several times and it shows, but the message I get when trying to add a printer says that it does not work. I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.
The laptop can find the printer, a Canon Pixma MP 550 and it works well but the PC just cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few. The home network seems fine and both recognize each other and I can access files on the other computer. But on the PC, there is no printer on the network.
Grateful for the advice. All the usual bugs have been tried.
Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics. It did not find the printer even when it is plugged directly into the PCUSB slot. This could be a problem of LPT 1? So, I don't know how to access the LPT to reconfigure.
I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.
Grateful for any help here.
Concerning
I found this link to Arthur Xie that worked:
It seems that there are some conflicts of registry HiKey. Following his procedure got all printers on the control panel/devices and printers screen and allowed me to download the current driver.
Thanks to all who have helped me to the right solution. Restore point created now.
Grateful and TY Arthur Xie.
-
Thunderbird starts by does not respond after the update to version 38
I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?
> I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.
This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General
-
Print Help does not help me open downloads on my android
Cannot retrieve or open downloads. Printed text does not help because I can't find the button
You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.
In the menu, you should find under Tools downloads.
In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).
A little luck?
-
Epson printer driver does not appear in the printer &; Scanner window
I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?
Mark Romine wrote:
How ca I add the driver to my preferences printers and Scanners?
You do not add a printer driver for printers and Scanners. You add the printer itself.
The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:
(I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)
The Artisan 50 printer seems (but not scanner) software in the Apple driver:
Printer and scanner software available for download for your Mac - Apple Support
Therefore, follow the instructions here:
-
Add-on for Print Edit does not work
I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?
Hello
Did you mean this extension:
The contact details are on the right side of the page, next to the section 'on this add-on.
-
29,0 Firefox, print 'selection' does not work.
When I select a section of a page, then use the "print" button, the 'selection' print option does not work. It is not highlighted in the print menu.
The button "print" 'action' in Firefox 29 differs from earlier versions. Now, he opens preview print rather than going directly to the box of "native print dialog. That breaks the ability to print a 'selection '.
My advice is to highlight the selection , then use {Ctrl + P} to start printing until Mozilla fixes the action of the "print" button in a newer version of Firefox.
-
Satellite A210 - 17l - keyboard does not respond
Hello
I have a problem that is driving me crazy.
When I press F2 or F12 to switch on the keyboard behaves as it should.
However if trying to load a Boot CD or Usb car via the options F12, the device is recognized
but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.
What makes strange, is that an external keyboard is recognized but the mirrors one internal.
I have the latest version of the bios update.F2 in the bios - ok keyboard.
Start in win7 - keyboard ok.
Insert bootable back disk via F12 option-charges but no keyboard reagent.
I think a partial corrupt bios
Someone has ideas about problem or even a solution.And what should happen on this stage?
For me, this looks like a problem with your startup disk.
I installed OS using different disks of Microsoft or USB recovery media and all you have to do is click on most of the time on the button NEXT.If the keyboard works in BIOS and Windows, I see no problem with the keyboard there.
Maybe you are looking for
-
Satellite M50-130: no display after the passage of the external display in main monitor
I have a very strange problem.My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen... Well, any help
-
I was curious office depot on this desktop computer and I was told the oveheats cell phone when an external monitor is hooked up to it and I was wondering why there is a vga first port if that's the question
-
my password does not work, but I could connect before
my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.
-
I have a hotmail account, * address email is removed from the privacy *, someone sends emails on my behalf to everyone on my contact list. It's an email to check a web site. What happened and how it stop?
-
problem reports and solution:
my window vista show me problem reports and solution, but it doesn't give me any solution. Tell me how can I solve this issue?