printer cartridge missing not detected

Similar Questions

• Print cartridge missing or not detected C4585

  Hello

  I have a photosmart C4585 printer all in one, for a long time, I used hp cartridges-it worked fine until recently when the "print cartridge missing or not detected" message appeared.  I Googled it and found a video on YouTube showing how to remedy this with a particular sequence, which only worked to a print.  Then the error message returned.  I replaced the "truant" cartridges with HP authentic and still always get the same error message.  I am at a loss to know what to do, really can't afford a new printer, my daughters will be lost without a printer for homework!  Please can someone offer me advice?

  Thank you very much in advance.

  Vinia, I understand that you use genuine HP NO ink cartridges. Usually, this creates a problem at the beginning. Even if you were able to print before, using the correct cartridges is the best way.

  Here is a link that might help with this problem.

  http://goo.GL/BI5MB

  I hope this helps, please do not hesitate to ask questions. Thank you

• Print cartridge missing or not detected message

  Hi - have a HP 4280. I just started to receive message "print cartridge missing or not detected". Have replaced the cartridges with new HPs and no dice. Always get the message. Have restarted printer and still no hemp. Any ideas?

  After cleaning, resets, etc., I got to work by installing the cartridges on the tenth time VERY strongly in their slots... I'm sure this isn't the approved view of HP, but it worked!

• HP officejet 6600: print head seems to be missing, not detected, or incorrectly installed

  does not print hp officejet 6699 - gives message "print head seems to be missing, not detected or installed incorrectly."

  I unplugged the instructions and it does not work.

  I replaced all the cartridges, and it does not work.

  It is more than one year warranty and I do not know where to take.

  I didn't have to buy a new one immediately.  The life expectancy of an all-in-one now is about 2 years old?   Can someone tell me what to try?  Thank you!

  He looking as if the printhead has moved or is not seated correctly in the printer? Try to gently move it and it sits evenly.

  There is an update to the firmware of your device which can help. You can find it here.

  Thank you very much

  Michaele

• "Print cartridge missing or not detected" says my Photosmart C4250 of HP all-in-One error

  My all-in-one HP Photosmart C4250 error is 5 years old.

  This week, he stopped printing with a message saying that it could not detect the ink cartridge.  The cartridge was low, but non-empty, so I asked a geek friend to take a look but no problem was found.  Today, I just bought and installed a new cartridge.  Still will not work.

  This printer has been reliable so far.  Any ideas?  I am unemployed and a new printer is certainly NOT in my future.

  Thank you!

  Here a link to a document that addresses the error message that you receive on this printer model. It will provide a troubleshooting to try in an attempt to clear the error message. If we filled all solutions in the document and continue to receive the error message, would seek to substitute.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• HP C4280 printer device error: print cartridges missing or not detected

  My printer has message 'Lack of cartridges print or not detected' sometimes it will print fine, sometimes msg appears. I cleaned the cartridges without result.   What should I do?

  Something to try would be to clean the contacts of the cartridge with a pencil eraser. Then it blow out with compressed air.

  I hope this helps.

• Print cartridge missing or not detected

  I have a HP Photosmart C4280 running on Windows XP.  Whenever I try to print, I get the message "Missing cartridge printing or undetected"... it seems to be the cartridge three colors, the origin of the problem.  I have taken the cartridges out and then put them, I turned off the printer and then turned back on... the only thing that seems to work is to go into my HP Solution Center, select my printer, select settings, select printer Toolbox, select Services of devices and finally click on print a Diagnostic Page.  Will then and only then the printer print my document - then it prints a page of diagnosis.  I do whenever I want to print something... any suggestions?  I'm wasting ink and paper...

  Hello Loggin

  You use genuine HP cartridges? The article below covers the cartridge for the Photosmart C4280 problems. You recently moved to another country? Sometimes new regions have different cartridges.

  "Incompatible cartridge" or "print cartridge is missing, improperly installed, or not intended for your device.

  Have you tried a new HP ink cartridge yet? In this way, you can locate the problem.

• Cartridge (still) not detected on Photosmart C4280 of printing

  The message on the Photosmart C4280.  I tried reinstalling, cleaning contacts.  Then I bought new cartridges of HP brand to replace the cartridges (non-empty).  None of this makes no difference.  I always get a "missing or undetected print cartridges" showing on the device.  Any thoughts?

  Hello

  Try the steps in this document of the

  One of these solve the problem?

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• New printer cartridge does not.

  Original title: I jst has installed a new cartridge in my printer and it stopped working. Why? I think that I have not completed installation correctly.

  I just installed a new cartridge in my printer a Lexmark 1270, and it has stopped working.  Why? I think that I him have not finished properly.though installation I'm absolutely certain that this is the right cartridge, a 17. Thanks for your help.

  Hello

   
   
  1. what operating system is installed on your computer?
  2. is it a network printer or a local printer?

   

   

  Follow these methods mentioned below and check. (troubleshooting steps apply to Windows 7 and vista)
  Method 1: Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Method 2: Follow this link to install the print cartridge:
  Install the print cartridge
  http://www.Lexmark.com/publications/pdfs/910/macxug/Eng/InstallPrintCartridges.html
   
  
   
  Reference: what to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  You can also contact the Lexmark support for assistance on this issue.
  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

   
   
   
   

• Black print cartridge does not print

  Inserted a new black cartridge on the Photosmart HP 5510 printer.  Ink level display shows black to 100%.  However, when you print, black does not show up/print.  Played "print head cleaning" alignment, all the various option of maintenance under the Tools section of the printer control.  No luck.

  The sugggestions

  Thank you

  Hello @psts and welcome to the Forums of HP!

  I would like to see if I can help with your Photosmart 5510 does not print black ink. The private message will follow if the document fixes the problem

  Please, try the steps in this printer prints blank Page or document did not print black or color ink. If these steps do not resolve that question please let me know which country you are, and whether the printer is in or out of warranty, thank you!

• Black print cartridge will not print.

  All of a sudden my impression fades.  I looked at the levels and he showed the photo and the very low black cartridges.  I changed both.  so I got a new photo cartridge and a new regular black ink cartridge in the printer (in the correct space).  When I printed the impression was very thirsty again.  I did a check for level and it shows the right amount in each cartridge except black regular shows empty.  just a bar empty.  No help for it?

  564XL is the number of cartridge.  Use a photosmart 7510 printer all-in-one.  Windows 7.

  e-mail: * address email is removed from the privacy *

  Thank you.

  Hello

  Troubleshooting print quality problems

  When you are trying to clean the printer & cartridges nozzles, once you have activated the printer off, unplug the computer and outlet.  When you are ready to turn back, reconnect the appliance to the wall socket, and then the computer.

  Try printing again

• Photosmart HP 6520: For HP Photosmart 6520 black print cartridge does not print

  My printer suddenly decided to not print black ink, the indicator showed still had about 30 percent ink left, but when making the diagnosis of quality black ink pring was incomplete printing.  I did an alignment of the printer and cleaned the printheads, still nothing, black does not print clearly.  I bought a new ink cartridge, of the March 2017 expiry date, did the same steps as above and nothing.  The black box is now completely empty.  My previous printer was a 6510 HP which has begun to do this, and after losing a ton of ink clean print head, etc., I ended up buying just the 6520.  It is now out of warranty as of October 2014, but black ink does the same thing as ink color on the 6510.  I watched throughthe for answers forums, tried to soak the cartridge in case it has been clogged, etc..  None of the above helped me, and I am not interested in buying ANOTHER printer.  Any thoughts?

  One of the questions forum indicated that l ' turn off from one day to the next, sometimes worked.  I turned it off last night and just turned on today, and works in ink!  Not sure if it was the rest overnight or clog with water, but today he works.

• hp6520e black print cartridge missing or failed, although it is new

  I got an error message saying that my black cartridge was low, while he didn't, so I replaced it.

  I also replaced the othe so colors, but I always get the message

  Printer is still under warranty, but I managed to solve the problem by resetting the printer (did not know that you had to leave unplug all cables, then wait 15 seconds for this)

• G85 Print cartridges do not line up

  My G85 printer has indicated that the black cartridge is low and must be replaced.  After you have inserted a new cartridge, the cartridges doesn't have to line up despite several attempts to complete the alignment process.  I removed and reinserted the black cartridge, but the alignment process has always failed.  I remove and reinsert the black cartridges and color, but that did not give positive results either. I reinserted the original black cartridge, yet once nothing helped.   At this point, I'm running out of things to try.

  Is it a hardware failure and can be that after repairing the printer will work or does have a suggestion that I could try before I give up?

  John Stallone

  [text removed for privacy]

  The automatic alignment process requires that the black cartridges and color work properly.  If the alignment page printing in both black and color (yellow or cyan, I don't remember for this model), it is possible that the sensor alignment is fogged. You may be able to solve this problem by cleaning the lower part of the sensor with a cotton swab.  The sensor is a small black protrusion on a 1/4 "wide and 3/4" deep which is connected in the bottom right of the cart near the back.