HP officejet 6600: print head seems to be missing, not detected, or incorrectly installed

Similar Questions

• HP Officejet 6600 print head error message

  Recently had an electrical storm and power neighbor hood was off briefly. Though even my printer is plugged into a surge protecter, I now have an error message on my printer that reads...

  "Missing or faulty print head".

  ceyan, magenta, yellow, black

  the print head seems to be mjssing, not detected, incorrectly installed, or incompatible"

  Before the storm, I had installed 2 new ink cartridges. My troubleshooting efforts consisted of unplug the printer from the power source and plug back and removing ink cartridges / resettlement. I always get the error message "printhead".

  Hello

  I think you did everything I would have tried.

  Even if unplug you the printer, I wonder did you leave it unplugged for more than 15 seconds.  See the link

  http://support.HP.com/us-en/document/c03750651

  If this does not resolve the problem then I think it would be appropriate contact HP because this printer is probably still under warranty.

  Hope this helps somehow.

• OfficeJet 6600: print head

  I'm having with my printhead on my Officejet 6600 I bought a little over a year.  I had to replace the print head twice on my last HP printer.  Is this a common problem with Officejet printers?   I don't know if I should replace the print head or buy another printer from another manufacturer?

  Hello

  OfficeJet 6600 doesn't have a replaceable print head.

  IAM surprised to read in your post that you had replaced the printhead twice.

  Problem with printhead would lead to service the printer.

• 8610: print head seems to be missing

  Hi all.

  I have an about 10 months and not particularly heavy 8610 AIO printer used.  Now, I get the error "Is missing or has no print head -" error 0xc19a0003.  I reinstalled the cartridges and out of the 3 times print head according to the HP KB, but nothing helped.

  Can I imagine that this part is under warranty and if so someone knows how can I communicate with HP that I have trouble finding their the United Kingdom phone number and/or e-mail address.

  TIA

  Kenny

  Kenny try this link .

• HP Officejet 6700 Premium - printhead seems to be missing

  Seems to be a common problem with these printers - me too I got the error message "the print head seems to be missing, not detected or badly installed"-I tried all the suggestions of troubleshooting with no results.

  I have never had any problems with HP in the past, and since 1999 have bought only products HP - when things had to be repaired under warranty, that these were always made in a very quick way - HOWEVER...

  This time is a totally different story - please someone at - he found a solution yet or is that a case of replacing the printer - can someone help!

  Welcome to the @debz143 forums, I hope you're well

  I read your post about the error "Missing or has no print head", you receive on your Officejet 6700. If you have tried all the troubleshooting, including a power reset (see below), give us a call directly to see what your replacement of the printer or trade options are with HP.

  A "Missing or doesn't have a printhead" Error Message is displayed on the printer or on the computer

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday!

• OfficeJet Pro X476W - missing 0xc6fd0013 message, or incorrectly installed print head not detected,

  Hi, everything has been good with this printer up to a couple of days. Whist, the right kind of noises - it just stopped printing, or sometimes {in response to requests for print) spat a blank page or both.

  I tried to clean the print head, but he travels just a loop and does nothing, if the wall point, deleted and reinserted cartridge, removed market turned and replaced the duplex roller, blah blah - all the usual stuff.

  But... I've never seen such a script error before - this is worrying. The printer just died on me?

  If so, is it possible to replace the printhead on one of them?

  No indication of how to solve the problem please?

  Thanks in advance...

  I couldn't find a service manual for the OJ Pro x476w or the other.  It is usually the case for OfficeJet products but I was under the assumption that HP was poised to release a service manual for the X Pro series since his business are more than the normal OJ.

  I also don't seem to be able to view the guide to normal use of the HPs site right now.  My hope was to search through it for clues as to how to complete the resettlement of the print heads, as there is usually a section small maintnenance included in the documentation.

  Given the nature of this problem and what I heard of HP engineers that the printhead from the printer table must have a life that survives to the printer.  It is supposed to be enough printheads on eachother table backup in the case of breakdowns that users are not supposed to notice the difference.  Even through the printer is out of warranty HP may be interested in helping you with the picture of the print head.  I give them a call and see if they can offer any assistance.

  Another idea would be to find a seller of parts and ask them if they have an array of replacement for your printer print head.  If they could have some instructions on how to install that you could use to reinstall your current table.  Googling autour, I was not able find parts online so this is perhaps a good reason to call HP and ask for suggestions on where to find spare parts.

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• OfficeJet 6500: Print head cleaning Cycle - why not choose a color?

  I'm having a problem with a single color (magenta) print does not correctly. I've had problems before with black. Why the prinhead cleaning cycle does not allow the selection of a single color for cleaning? Why should I lose the other colors of ink when there is only one that needs to be cleaned? I know that HP wants to sell ink, but be reasonable! That I had problems that appear only after you HAVE installed a new ink tank. And it has not shown using a cartridge to power after best-use-by-date. My guess is that if the ink cartridges are not stored properly the use-by-date means nothing.

  There are a few components of the automatic cleaning cycles.  There are a set of wiper rubber that moved across the printhead to wipe or scrape debris from the print head.  All wiping little ink is spit of each nozzle to lubricate the wiper and help clear the clogged nozzles. The wiper is built on a unique sled with a motor that moves the wipers back and forth.  Allowing single color cleaning would require a much more complicated mechanical system, with four distinct and motors wipers to control.  (The wipers should be dedicated for each color.  She would cause the nozzle clogging if the black ink is allowed to mix with the color and would cause if different colors used the same color mixing wiper.)

  Similarly, for your Officejet 6500, there is a pump system for a more energetic cleaning or for initial priming of printhead.  If it was designed for a single use of color, then a more complicated system, with four independent pumps and controls.

  A Mater of reliability and economics, it is not practical to have separated in level printers cleaning cycles.

• compatibility issue with my HP Officejet 6600 printer and my Samsung laptop

  I have a problem for my printer HP Officejet 6600 to be compatible with my new laptop. The laptop is a Samsung with Windows 8.1 and when I try to configure the printer with it, the printer says that I have Windows Vista, Windows 7 or Windows xp with service pack 2 or better.  Should not work with a computer with an operating system update there? How can I get the printer to work with my new laptop?

  Hello

  Your printer is in the following list:

  http://support.HP.com/us-en/document/c03168175

  Please download a tool and run it on your new computer while BOTH computers and the printer is online.

  Kind regards.

• OfficeJet 6830: Print head Error Message

  Obviously, there is a problem with many people.  While I remember just when I bought it, and it is even possible that I had for 6 months or a year, this print head thing is a problem, and so far, the machine worked perfectly.  I wouldn't have to go buy another when it's clear, there is a malcunction with the machine that is so widespread.

  I need my printer to my job every day. Which caussed cela and have the rest of you is also the woman who had been his machine for only 30 days?

  mjwhearts

  You will need to contact HP for a replacement.  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• OfficeJet Pro print heads

  What are they and what are doing. When they need to be replaced?

  The print head is the distribution of ink system and is responsible for the ink being sent to the current page. Older printers integrate the print heads (IPH), meaning that the print head is part of the cartridge. Separated ink print heads to prolong life, because it allows the ink supply remaining a fixed position and allows a greater amount of ink to be stored in cartridges.  It also means that since they are not included as in older printers that if a print head needs to be replaced that ink will not be thrown.

  If a print head needs to be replaced there will be an error message, or print quality is unacceptable even after everything from troubleshooting to solve the problem have been tried. most printers have the ability to print a page of diagnosis with test models to assess the health of the print head and if cleaning must be performed.

• OfficeJet HP 6600: printhead missing, not detected or ill-posed

  Ink is not empty and is correctly installed, but above message continues to appear and it give no details about the problem.

  In the paper here troubleshooting steps can help solve the error message print head on your Officejet 6600.  Unfortunately, the print head on Officejet 6600 is not removable, and if the troubleshooting steps do not resolve the problem you contact HP to service.

• HP Officejet cannot print my membership cards for a not-for-profit organization

  Product number B4L03A warranty status covered under the warranty end date 2015-07-05 (YYYY-MM-DD)

  I am running Windows 7

  "I have a special form that I need to print for our not-for-profit organization. It's a membership card. "I get the map in PDF format and print is that the paper is 8 x 10, but it is printed on a 'card', is the size 8.5X4 5/8, can I get the printer to print on the card that is not the size of the paper in the PDF file.

  Hi, the 4630 cannot create a custom paper size.

  You can try using a spare printer driver that will allow you to create the custom paper size you need.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list
  9. Select Deskjet 450 in the second.
  If the 450 driver is not there, use the Deskjet 990c printer driver.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• printer cartridge missing not detected

  Hello

  Just installed the cartridge a few weeks ago. Goes very well and everything suddenly this message on printer says cartridge is not detected/missing. Can anyone help?

  Hi Lee,.

  Cache files are files that enter your system through some examples of websites: to open some website there is some animation or graphics that must be downloaded and it will do in the background so it will download. You must clear these either once a week or once a month, as it will increase the speed of navigation as well... it might make your computer slow. They are sometimes called the temporary files and history, internet files temporory, cookies and other...

  Incase so if there is some unwanted files that could block the web page and you will see some gibberish Articles there... so please clean internet explore once a week... and all of these files...

  Who is the borwser you use Internet expolrer (IE) or Google chrome. to navigate on the internet... On the top browsers you will have the menu file, tools, help options listed in IE

  Step is to remove this is go to tools in Internet Explorer and select internet options and there will be a pop up inside the tab general, you have the options to clear the history and once you click it, it will remove all the things that would have creeped in own (computer) system...

  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

  Concerning

  Aneesh

  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...