Printer Devicehpd2600 not resopnding, says unknown

Similar Questions

• "Print cartridge missing or not detected" says my Photosmart C4250 of HP all-in-One error

  My all-in-one HP Photosmart C4250 error is 5 years old.

  This week, he stopped printing with a message saying that it could not detect the ink cartridge.  The cartridge was low, but non-empty, so I asked a geek friend to take a look but no problem was found.  Today, I just bought and installed a new cartridge.  Still will not work.

  This printer has been reliable so far.  Any ideas?  I am unemployed and a new printer is certainly NOT in my future.

  Thank you!

  Here a link to a document that addresses the error message that you receive on this printer model. It will provide a troubleshooting to try in an attempt to clear the error message. If we filled all solutions in the document and continue to receive the error message, would seek to substitute.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!

• 8600, connected HP says there is a problem but the printer does not work

  I try to use a 8600 e - all - in - one. It replaced a 8500 who has never had a problem with eprint to an email address or as a printer of google cloud.

  With the new printer, when I get it in hpConnected correctly identifies the printer and it's e-mail address. He says he's online. It also gives me the warning sign of exclamation to a printer problem. When I click it says that there is an unspecified error and see the front panel of the printer. No error on the front panel of the printer.

  If I send print jobs via the address hpeprint, it works every time.

  Because hpConnected said that there is a problem: the page of the google cloud reports that the printer is offline.

  Connection is complete Hughesnet, so that might be a contributor to the problem.

  I finally solved this problem. I reinstalled an old Windows laptop-based printing software and now hpConnected said there is no problem. It's strange because the printer is not physically connected to any PC. It is wireless only.

  To solve the google cloud printing problem, I disabled the Web Services and then reset the default wireless property. When I went through the Setup Wizard again, it gave me a new code of acceptance. I got to hpConnected and then added the printer to the Google Cloud Print/HP dialogue page.

  Now, things work as expected.

• stopped printing, the error message saying there is not connected

  do you have a reboot once (power supply is to unplug for 15 seconds) who worked for impressions of 1-2, then the same error again.

  bought the machine three days ago

  I need detailed help. Tried to get it from online contact, but made a mistake by entering the product number. He wouldn't let me edit/correct, if I get no response this way.

  There are two cables in the box with the new printer. I heard him say I should use one or the other. Should I have used both? I don't have. I have an assortment of things on the spot, but since I don't know what the problem is, I don't know about taste.

  ignorant here 72 years old computer. Really frustrating. I usually have no problem setting things - have done so several times - and that they install and work as advertised. Have installed webcams, printers, monitors, simple stuff like this - has never had this kind of problem. I don't know what to do and have now idea how to fight my way through real support of HP.

  Please forgive my whining and simple if possible assistance.

  Sharon

  Hello
  
  Thank you for using the HP forum.

  It would help us if you can provide the printer model (NOT serial numbers), operating system and how you want to connect your printer (USB cable, wireless etc.)

  In the meantime, you can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU
  
  Hope that helps.

• El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  Open Printers & Scanners, select the Pro 100 and remove it from the list of printers by clicking the button "-". Then click on the button "+" to add the Pro 100 again.

  If wrong you again then try to print a reset of the print system. Note This action will remove all devices breeders & Scanners, but not supported drivers, so you just need to add the printer again. To reset the printing system, open Printers & Scanners and rest the mouse pointer over the list of printers. Then right click on (or hold down the command key, then) and select Reset from the context menu that appears. You will be asked to enter your password for the process to continue.

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?

  My HP Photosmart Premium is saying "preparing the printer can not be interrupted.  Please wait... "What is happening?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-premium-error-message/TD-p/1470957

  HP support

  Edit:

  I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.

  I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge).  I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely.  This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges.  She also told me that there is a paper jam, even when there is no paper in the machine.  I even let the maintenance run all night without success.

  Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.

  above compositions of this thread:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/HP-OfficeJet-Pro-8500A-plus-printer-is-stuck-in-maintenance-mode/TD-p/1207907

• I can't print anything I have a window saying, the coil of the printer does not work

  I had a recurring problem with random periods where my printer does not print and I get a message saying that my printer spool does not work.  How can I fix it?

  Hi LoraSwander,

  · What is the number and model of the printer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the full error message that you receive with the error code as appropriate?

  For now, try to run the fix it from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/en-us?entrypoint=lightbox

  With regard to:

  Samhrutha G S - Microsoft technical support.

• printer says PSC 1200 Series: 'out of paper', but printer is not paper.

  Printer sucked into a pile of leaves, when I started to print a document, rather than a single sheet.  After removing the paper, I have re-load of paper to try new print job, but printing failed info and printer for this device says "on paper."   I was not able to clear this error despite the many re - start, re-loading paper, etc.

  I wonder if the paper sensing switch was damaged when it sucked up so much paper?  If so, actually that now require repair factory?    All possible solutions if it is that or something else?

  Okay - the printer is fixed, but not by me.  My brother took a glance and first determined that there always pulls paper in copy mode.  Who determined that it was not a hardware problem but a software problem.   I don't know the exact details of what he was doing then, but I think he has reinstalled the driver after uninstalling it and/or the software of the printer.   He started again, and Windows 7 has recognized that the pilot and that solved the problem.

  Technical support did not come to the top with that answer - they said it was a faulty sensor and that it could not be repaired and I have to buy a new printer.

  Thank God we don't listen to HP technical support.

• I am not able to connect on one of my computers, my network error message saying: unknown username or bad password.

  Journal of the network questions

  I am not able to connect to my network to one of my computers.  I enter the username and password (same as to log the computer - correct?), and yet I get the newspaper no failure message saying unknown user name or bad password.  What can I do?

  go to the Properties window (right click computer and select properties) is the only registered owner your name on the first pc and your first and last on the second?

• my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  original title: printer driver

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  Is what printer? Where did you get the driver?

  That you download and install the * good * driver for him? It must be for Windows 7 and Windows 7 32-bit or 64-bit Windows 7, depending on what you are running.

• my printer does not, print says no driver found and implemented to update spooler.

  Original title: all of a sudden my printer does not print says no driver found, went to the website of downloaded lexmark driver but still does not print. conjecture.

  I try to print, but it seems that the computer and the printer are not on the same page.
  This just started about 4 days ago.
  Spooler has something to do with it, I got a pop for updating the spooler or not and not clicked by chance do not know how to find it so I can update.
  Not really in all the tech stuff, any help would be grateful.

  Hello

  Do you remember the full error message with spooler?

   

  Method 1: Run the following fix - it:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: See the following article:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 3: As it happened four days before, restoring the computer to a date where it worked fine before.

   

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Printer does not print because it says I have an expired cartridges

  I have a HP C5180 printer. Just replaced ink Magenta cartridge about 2 weeks ago. Printer does not print not even black only because of the alert, saying that the light blue and magenta cartridges are expired and can damage the printer if continue to use. What is everything?

  Contact HP for more details on what it's all about.  Go to their Web site, go to the help area and support, enter the model number of your printer and away from the search.  It is not a Windows problem and you or Microsoft can do that will fix it.