printer does not print with Vista

Similar Questions

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP4050 does not work with Vista.

  I did all the uninstall/install as shown in several places and nothing won't print. I get just "printing error" in the status area.

  This worsens the problem as it used to work fine. It got to where I could unplug/plug in the printer so that it and the laptop, or restart the laptop and the dependiing overnight, one of them would solve the problem. Then, it is to reinstall the drivers, and it worked for a while before returning to the steps of the power.

  Now, it does not matter. No printing. No "job processing" flashes on the printer, only "printing error" when I opened the Printers folder.  I'm on the good (and default) printer and the correct port. All connections are good and the printer works on an old laptop w / XP and ALLOWS to work on my other laptop, also with Vista. Now it does not work it reliable either.

  Using the correct driver for Vista 32-bit, so it isn't.

  It is a great printer and buy another isn't on the horizon of affordability.

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printing problems? Try the Windows HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02726548&cc=us&DLC=en&LC=en

• WLAN manager does not work with vista 64

  Hello

  Recently I've upgraded to Windows Vista 64 bit because I bought the additional RAM. I downloaded the drivers for my USB wireless adapter (which is a WUSB54GR), but they do not come with Wlan Manager. I tried to install the WiFi Manager since XP drivers, but it won't work.

  The reason why I want this to work is that there are several SSID on my network with the same name, and I want to choose the best of them. Vista indicates the name once only and does not automatically select one that suits, and now I have lag spikes in games like World of Warcraft.

  A good third work program would also work I guess, or a vista/hotfix patch for it.

  Need help please, I searched the internet for this many times with no effect

  Thanks in advance.

  Thanks for the reply. After some research more, I found out it was something else that caused the lagspikes.
  Windows Vista checks to see if there is a best available wireless connection every minute or so.

  I downloaded a little program called WLAN Optimizer .do, it runs in the background now and my connection works great.

• TomTom GPS unit does not connect with Vista?

  I have a TomTom ONE XL 325SE v9.  I'm trying to connect it to my PC and when I put it in the USB port, the computer resumes that I plugged in new hardware, click on search and install drivers, and it tells me to insert the CD that came with it (it is not a), so I click on "I have not a CD show me more options» so I click search for drivers and it tells me that the driver is not found.  I called TomTom and they told me where to download the TomTom software, I did. I made sure that all my windows updates were updated, I tried again and it still does not! TomTom told me to get a new computer! lol I also went into the control panel and to the pilots and made everything thing that TomTom told me to do and that does not work either. I googled the problem and it seems that I'm not the only one, but I still can't have a solution! PEASE please help! I'm going nuts!

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Age of Empires II does not work with Vista or Windows 7

  I could not get Age of Empires II working on my laptop - first with Vista and now Windows 7.

  It installs OK and when you go to launch the small graphics launch box comes up, then the screen becomes phsychedelic before returning to normal and nothing more.

  It is a Compaq Presario with a chipset Mobile Intel R45.

  Any advice?

  RusFry,
  If you weren't able to get the game to run in that same laptop with Vista or Windows 7, it seems that there is a conflict of material with this game.  I see that this game was for older systems and only supports graphics 800 x 600.  You can turn your the desktop resolution to 800 x 600 with 256 colors, and then run the game.  If this does not help then you may install DirectX 9 and see if that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• U3 USB stick 4 GB does not work with Vista

  Hello

  I bought a new toshiba 4 GB USB but it did not work windows Vista and an update is not available. Can someone tell me if there is another solution for my problem.

  Sorry for my bad English, I'm German

  Tried this stick with another computer? The stick is may be defective and you need to exchange it by your distributor. Just try it and let me know what happening.

  See you soon

• Toshiba secured 500 GB does not work with Vista 64 bit

  I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
  On the box says it works at least with Vista, but I can't install it.
  When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.

  Now, I've read that this device must be compatible with 64 bit OS
  http://APS2.toshiba-tro.de/KB0/OPT1103320000R01.htm

  What can I do to make it work?
  Why Toshiba still sell this device if it is not compatible with the current operating system?

  Is it possible to update the digital firm pilot?

  PS.

  The security problem is on:
  Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security

  Hello

  Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
  The software is updated

  As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
  Should work

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX

• Dynadock does not work with Vista

  Press releases USA Toshiba the Dynadock was WXP and compatible with Vista, but it's NOT.
  Nobody knows when it's released software / or ways to get the Dynadock to work with Vista?

  Hi Stuart

  I put t know how it works in the United States, but here in Europe, according to the specification Dynadock, it only works with Windows XP SP2 home edition. I don't think someone can give you info on support for Vista especially here in the user forum.

  Try to learn more, contact your local dealer or partner authorized in your country.

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Sky wireless broadband does not connect with Vista

  I just changed my BT broadband to Sky.It works fine on my Mac but not connecting with my roommates PC that uses Windows Vista.After calls long with sky they said there is a problem with the DNS. I tried to call Microsoft, but they want to charge me which I am unwilling to do. I can connect to the internet on the pc with the thin Ethernet cable. In the center of network share, I have a cross between the network and the help of Internet Icon.Please as it should be sorted as soon as POSSIBLE and I cannot believe with such a company big as the sky that has thousands of customers, they say that it is a known issue and there is nothing they can do... So basically they say that anyone with Vista cannot use their wireless computers!

  Help, please...

  Hello pookieboy140,

  I suggest that you start with the management of Network Diagnostics on the computer that will help you in error, like why you are not able to connect to the Internet.

  You can refer the link that will give you information about this below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Since you are not able to connect to the Internet, the best way to solve this problem is to contact your service provider.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• use dreamweaver mx does not completely with vista

  New computer received as present, have windows xp on the last computer, like dreamweaver compatible with it. When I tried with vista it doesn't let me insert tables, etc. Simple suggestions please?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• Panasonic DP150 fx printer does not work with Vista

  I bought a printer cable adapter to change it to USB of the old broad decision-making in 2001.  The printer test page print sometimes, not always, and then it goes again quiet. I found a new driver for Vista 2008 Server, is this different from Vista Home?

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.