printer Envy 5660: matter of envy 5660

Similar Questions

• 5530 multifunction printe envy: want to set up the remote printer 5530

  Hello

  I have a printer Envy 5530 (new, never used or put in place) and I would like to use it to print remotely from my tablet. My tablet is running Android 4.2.2.

  I DO NOT have a computer and would like to know if there is a way to set up this printer to print remotely from my Tablet without needing to use a computer in the configuration.

  My tablet is currently connected wireless to my router which is not vacant ports Ethernet open if they needed to be able to print (although do if completely wireless would be preferred.)

  Thanks for any help anyone can give me.

  Hello

  You can attach your printer HP Envy 5530 to your existing wireless network, and then

  (a) use Google Play/store to install HP ePrint app on your Android device to print when the TWO are on the same network.

  (b) that your printer is also an ePrint printer. You can send an email to the email address that you want to print (supported file formats) when you are away from home

  Copy the following information to connect to your wireless network

  www.YouTube.com/watch?v=kOUA2t7lJlk

  Kind regards.

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• HP Envy 5660: cannot send mail on printer Envy 5660

  A new HP Envy 5660.  Almost too fancy for me and little info screen requires the steady hand and a stylus.  I tried to send an email and when I finally got my email address to she wanted a PIN and I do not remember if I never took one and if I did I forgot.  Don't know how to get information or change the pin code.  If I could do it on the computer maybe I could read.  My question is how can I get a PIN, if I can use my email?

  Hello @rmill777,

  Thank you for joining the Forums of HP Support!

  I understand that you are having problems with the Email scanning function on your new HP ENVY 5660 e-all-in-one printer as you are be prompted to enter a PIN that you do not. I want to help you with this issue today.

  How to set up scan to Email in profile:

  To use the E-mail scanning feature, you must first define a mail profile.

  1. on the printer control panel, press the Scan icon (), and then tap send.

  2. on the Welcome screen, press continue.

  3 touch inside the Email: area, enter your e-mail address and then press done.

  4. press to continue.

  5. a PIN is sent to the e-mail address entered. Touch continue.

  6. tap PIN, enter the PIN code , you have received in your email and then tap fact.

  7. press on the Email to store or Automatic connection, depending on how you want the printer to store your login information.

  8. Select your type of scan by touching the Photo or Document.

  9. check the e-mail information and press continue

  10 touch Scan to Email.

  11. press OK when the scan is finished, and then tap Yes to send another email, or No. to finish.

  Once the scan to E-mail has been implemented, you can change your e-mail account settings scanning if you wish:

  1. on the printer control panel, press the Scan icon (), and then tap email

  2. on the display panel, tap the account you want to editand then tap Edit.

  3. Select among the following settings that you want to change, and then follow the prompts on the screen.

  • Auto-login

• Printer Envy 5660: How can I have a different destination after a scan

  How can I have a different destination after a scan so profile Windows my wife she will have to go to its documents and on my profile do go to my own documents

  Hi @drmarcLB,

  Welcome to the Forums of HP Support!

  I understand that you need help save the scans on different destinations on your HP Envy 5660 printer. I'd be happy to help you with this.

  Here is a document that I recommend that you try, HP printers - Scan using Full Feature HP Software (Windows 7).

  For example:

  Scan the document

   

• ENVY 5660 All in One: internet access HUGE in 4 hours of printer ENVY 5660

  Hello

  I had a hard time with my brand new (3 days old) want 5660 Iin all-in-One. He had a rash of sleep/wake/restart Issus where I worked through--with little success.

  However - today I saw a HUGE increase in my use of the internet just in the last 4 hours. I installed this printer on 7/25 - use of the internet was normal on this day and on 7/26 - nothing more than my usual consumption - and I was playing around with the printer for the most part of these 2 days. Today I turned it on and within 4 hours, I had used close to a GIG and a half - usually in a day I don't use only about 250 MB (a GIG and a half is about 8 days for me).

  Everything was normal - unauthorized access to my signal, nothing extraordinary for the use - computer actually very little use at all - just this printer. Any ideas of what could be the cause? Something went wacky within the printer itself?

  I have little confidence in this printer now - and if it's really going to use all my monthly allowance of the internet (I don't have unlimited access) - I can't keep him. It is now OFF until I followed my use some time - which is not helping me to solve the other problems he has.

  Any ideas on what the question might be - something to check or disable - would be greatly appreciated.

  Thank you!

  AMT

  Hello @TNorth,

  Welcome to the HP Forums, I hope you have a pleasant experience with us!

  I understand that you have some doubts about the internet usage of your e-all-in-one printer of HP ENVY 5660. I want to help you with this.

  First, while the printer connects to the internet, none of its functions could use the amount of data you describe. So, I do not exclude the possibility of an unauthorized access to your network.

  You use the printer for ink snapshot? Otherwise, you can actually turn off the function of web services on the printer and it does not connect to internet at all (you will still be able to print good wireless).

  If you want to keep the web services that are running, try to disable the feature of automatic update for your printer:

  1. Drag to the left on the printer homescreen and select Setup.
  2. Select printer Maintenance.
  3. Select update from the printer.
  4. Make sure that the Automatic printer updates is set to OFF.

  If you still have problems with the printer after these steps, I recommend to contact our telephone support of HP Cloud Services at 1-855-785-2777.

  I hope this helps!

  

• Why is trying to connect my printer Envy to Facebook?

  I just put my all-in-One HP Envy 114 printer and it prints, scan and connect to wireless internet but when I select the Facebook app and put the code in the page of device Facebook nothing happens.  I use a Macbook Pro with OX 10.6.8. Where can I activate, Facebook, HP, or Apple?

  Unfortunately, it is not big thing to do from the computer for that matter.  I'm sorry.

  You can try to contact Facebook support as the behavior is between the browser and the site.  We already did all that we can from the side browser that leaves the site.

  The Facebook app would only print photos on your facebook account.  If you need a quick way to print photos of the printer, you can try to use Snapfish.  This will require a few extra steps if Snapfish is not already configured.

  If you are interested in using the Snapfish application, you must first create an account on Snapfish.

  Once created, transfer photos to your Snapfish account.  More information on this process can be found here.

  The next step from here would be to open the Snapfish application on the printer and connect.  From there, your photos should be listed and you can print from the printer as long as the pictures are on your Snapfish account.

  I know that this alternative method is not ideal because Facebook is already installed, but I wanted to give another method, as the Facebook page of the device does not behave correctly.

• Printer Envy 7460: How Hackable is my Envy 7460 printer?

  The recent attacks denial of Service distributed on the main websites used a large number of pirate designs accessible Internet, including printers.  How hackable is my Envy 7460 printer?  Can I change the password?

  Thank you.

  Not very hackable.   Change the password?  Of course, change your SSID and password of your router.  Not go back and reconnect again SSID with password.

• Printer Envy 5540: 5540 Envy will not identify paper

  My HP Envy 5540 printer was working fine, then stopped due to out-of-paper message. It is not paper. What can I do so that he can recognize there is paper?

  Hi @Dayala11,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer all-in - One HP ENVY 5540 who not print because it says it's "on paper." I would like to help with that.

  Here is the document of support with this problem - shows "on paper" and did not choose the printer paper.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• 5660 want: Fast/Economical printing want 5660

  We wanted the 5660 only about three months and were broadcast through extremely fast ink while printing very little.  We tried to change the print preference settings, but the preference for economy printing is locked and unavailable.  I tried to create a new shortcut to preference impression with the draft definition, however he continued to print with the same resolution as the normal setting.  Is there a way to change this?

  Hello!
  Welcome to the HP community @dentistom,

  I saw your post on trying to change the print settings for book on ink and wanted to tender hand. My best advice would be to check the image/link below and select the steps to "change the default for all printing print settings', allowing that each work is printed in draft mode without returning to print in 'normal' after each use. If you have already tried to do as a result, of course the printer is directly connected to socket, avoiding bars power and surge protectors. If you think there may be a hardware defect, contact HP to inquire about a replacement unit.

  Changing the settings to print in Windows 7

  
  
  If you have trouble, let me know and I'll do my best to help.
  
  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!
  
  We wish you a wonderful day

  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Want 5660: want manual user for printer HP 5660

  I just got this printer and would like some instructions on how it works.  That is to say: how to change printer of color to B & W or vice versa.  How to set up for printing images on smaller print - etc.

  Hello

  Copy the following pdf file:

  http://h10032.www1.HP.com/CTG/manual/c04425658.PDF

  Several manuals:

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6809225/model/6809226/manuals/

  Kind regards.

• range of HP envy 7645 printers: printer envy 7645

  I have a printer of hp Envy 7645 and off color. I want to now turn the color option and have not been able to do. Help, please.

  Hi joanne3, I would like to help you get your color work again.
  
  If you disabled color by adjusting the settings of the printer, you can learn how to set this option returns with the manual for this model here.
  
  Try clicking on Print, Scan & Fax, and then set the preferences. You can adjust your default settings here. Refer to page 28 of this manual for more information on the configuration of your default settings.
  
  I would like to know if this helps - happy to solve problems more if it's not.

• Printer Envy 5542: Envy 5542 printer Scanner does not

  When I try and scan shows that the scan on the printer screen, but still like that - nothing happens.  How to operate?

  Hi @Kingy1,

  Thank you for reaching out to the HP support forums for a solution to your printer problem.

  I understand that you use a HP ENVY 5542 e-all-in-one printer with a Windows 10 computer when you try to scan the printer shows 'scanning' on the screen of the printer, but nothing happens. I would like to help with that.

  Is there an error message that appears after the printer is finally that the scan will not happen?

  You connect with a USB cable or via a wireless network?

  I would like to start by making a power reset the printer just to erase an error status, just in case it is in one.

  

  Then I download and run the HP print and Scan Doctor. This tool can diagnose and fix many printing and scanning of the questions.

  Please let me know how printing HP and doctor Scan is going, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• HP 4520 ENVY: Printer Envy HP4520

  My desire 4520 won't print in black. I have downloaded the Print and Scan Doctor posing some problems and the so-called fixed. I ran the test print and darker band in the black section is missing. The ink levels are OK and I ran the head of the vacuum. I restarted it Print and doctor Scan which didn't say now no problem. The test page I was yet no more dark black band. Youn can help?

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4520-all-in-one-printer-series/5447920/model/5447921/document/c04710072/

  Let us know.

• printer Envy 4504: envy - 4504 printer

  I just bought a HP Envy 4504. the first document I sent to the printer has been a problem.

  the paper continues to print without interruption. more than a 100 pages should be printed. There is a botton cancel on the printer Panel, but pressing it doesn't make any difference. no other print jobs print only the first task that has been sent to the printer.

  are there any action on the computer screen that I can go to cancel printing or to see the queue?

  Hey @paul-anthony,.

  Welcome to the Forums of HP Support!

  I would like to help you today with this copy multiple print jobs which continues to print from your HP ENVY 4504 e-all-in-one printer.  However, in order for me to provide you with a precise support today, I must say if your printer is connected via a USB Câble connection or the network connection to your computer Windows 10?

  What is important is because it will help us to identify this problem. If networked, the router can constantly send the signal 'print' your printer to print several times that the job. If USB connected, the print job may be "stuck" in the print spooler on your computer and which is the cause of print without interruption. The print spooler is the printing system integrated into Windows computers. It controls all of the printers for printing, regardless of the brand or model. The print spooler to be corrupted, impression of the problems, as you are having, can occur.

  NOTE: To cancel the print jobs to the computer, if a print job in the print queue you will see the printer icon on the task bar of your computer down at run time. Double click on this icon to view the print queue and cancel the job manually. If no icon print, open devices and printers. Right click on your HP Envy. Left click on see what's printing. The print queue is now open.

  For now, please power OFF your printer. If networked, can you please disconnect the power cable from your router. If connected via a USB cable, please unplug the cable USB from the printer and the computer.  Once disconnected please follow the steps below to ensure your computer's Print Spooler Service.

  • Step 1: Check print spooler:
  1. Click Start
  2. 'Ask Me anything' enter run.
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here
  • Step 2: Check the spooler folder:
  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder
  • Step 3: Start Spooler and audit dependencies: 
  1. Open the Services window we previously minimized
  2. Click print spooler to highlight
  3. Click Start in the upper left corner. If you get an error message please take note of it
  4. If the print spooler starts successfully you will see "stop and restart" as your options at the top left
  5. Close the Services box

  Once the print spooler has been started, please turn on your printer. Then, plug the router or connect the USB cable. The printer must stay in the ready state. If the printer is in ready state, please send a test print from your computer to your printer.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please specify how your printer is connected to your computer. I look forward to hear from you!