Printer HP Photosmart C3180 - new computer

Similar Questions

• Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57

  Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find

  am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.

  Hello

  • What happens when you try to install the drivers?
  • You receive an error message?
  • What version of the Windows operating system do you use?
  You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.

  To see how to perform the clean boot, click the link below.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.

  You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept.

• Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180

  
  

  • Description of the problem - unable to connect to the printer, unless you restart printer
  • -Printer HP Photosmart C3180 all-in-One Printer model
  • (Including service pack revision) operating system - Mac OS X 10.6.2
  • -Wireless connection method
  • Error - could not connect. Photosmart C6100 series (C8897C) is currently unavailable. Please check is it is on and connected, or try again later.
  • Using the latest version of the drivers for HP 2.3 Apple updates and the latest version of the bundled software HP 4.4.3 utilities.

  I was able to solve the problem by reading the comments of others and came across the solution.

  By turning on the printer press and hold keys # and 3 which resets the printer as a warm reboot. Hold the keys down until the main menu appears on the screen (it took awhile so be patient).

  Return to the Mac and remove and re-add the printer via system preferences > printer and faxes (-/ +). However, there is no need to restart the printer twice until it was added back successfully.

• Photosmart 3210xi Printer-cannot install the new computer Win7

  Hello

  I just got a new computer which has Windows 7 as operating system, previously using Win XP.  I have the original installation disc, but when I try to install my HP Photosmart 3210xi printer, it tells me that it is incompatible with my operating system.  How do I overcome this?  BTW, I can just plug in the printer and it will work, but of course I want to install it so I can use the scanner program and others.  I am not a novice, but I'm not a computer programmer that so keep that in mind!

  Debbie

  Hello

  Download and run the installer printer HP rom www.hp.com/go/tools

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• Photosmart 6520: New computer, Windows 8, need to put a shortcut on the desktop just to scan

  I just installed my printer on my new computer, windows 8.1 software.  I want a separate desktop icon just to access my scanner.  How can I do that.  I had a separate on my Vista Home Premium.

  Help!

  Hello

  Open Windows Explorer and navigate to the C drive.

  Navigate to C:\Program Files Photosmart 6520\bin for a 32 bit OS, or C:\Program Files (x 64) \HP Photosmart 6520\bin for a 64 bit OS.

  Right-click on the HPScan.exe file and then click Sendto > o your Office Desktop, a shortcut will be added.

  Kind regards

  Shlomi

• HP Photosmart c410a: new computer will not let me install the photosmart software... 'enable usb in BIOS '.

  What a waste.  Just bought a new computer with Windows7 Pro descktop installed.  Could not load the HP software by using the cd or download from HP. I get the message below.  New computer and all the usb ports work.

  ANYONE?

  Photosmart c410a

  NMR SDGOB-0826

  p/n is not found

  Thank you

  USB drivers "this computer has no USB software necessary support to allow for the completion of an installation of the USB." The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. To install this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. »

  A USB device "this computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. In order to install this as a USB device, see your computer documentation or documentation for more information USB expansion card. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  In fact his problem with the installation.

  Extract the exe file in a folder using 7zip

  Then delete usbready.exe

  And run setup.exe

  I had this exact error and solved with these exact steps on a new installation of windows with asus motherboard with all the usb ports on work.

  For some reason any the usbready.exe is just trash in some installations and does not correctly detect the usb ports.

  Edit: You can also follow these steps if you do not want / can not install 7zip

  From Windows Explorer type folder in the address bar and press ENTER.

  Locate and open the most recent HP installation folder, which begins with 7z (e.g. 7z1234a).

  Open the installation folder.

  Locate the file named usbready.exe, rename it to usbready1.exe or delete it.

  Go back up a level and start the Setup.exe program.

  Now follow the installation and check the differences.

• Cable printer LaserJet 1100 and new computer

  My company bought a new computer for me that has any LPT port.  For my LaserJet 1100 printer cable is a cable LPT. I've seen some off-brand cards online but prefer to have a HP cable that will work with my printer and the USB connector on the computer.  If so, where can I find one?

  The cables in the posts tagged here are reported by users to work in Windows 7.

• b & w print fail photosmart C3180

  I changed the black cartridge because printing was getting faded and now won't print in b & w.  Fine color prints.  Have you tried both cartridges are nothing new.  No warning lights/check the lights of ink at all.  Any help?

  My bad.  I read about the warranty for cartridges, and mine were all out from 10/2010.  I put another cartridge, and it worked fine.  I didn't know that the life of the ink was over.  Thanks anyway!

• trying to install printer hp photosmart c5280 on computer vista, no internet access

  Error 1935.  An iccurred errir during the installation of Assembly 'MICROSOFT. YC80, Processor Architecture = "X 86", public key token = "1f8b3g9a1e18e3b", version = "WIN32". Please see Help & Support for more information.

  Please to http://www.hp.com/support for troubleshooting information about "FATAL ERROR" and "MSI. Scan.

  I suggest do you what he says and contact HP technical support and see what they have to say.  They added that the message, unless they thought that ITI was important for them to get involved quickly and at the beginning and before you try anything on your own that might interfere with their ability to solve the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers

  Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download

  * original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1146331&LC=en&cc=us&DLC=en&submit.y=5&submit.x=4&lang=en&cc=us

  Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1146331&LC=en&cc=us&DLC=en&submit.y=8&submit.x=5&lang=en&cc=us

  Installation, configuration, etc. info at the link above.

  For any other questions about your printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• Office jet 6500 HP has more: printer is not compatible with the new computer

  Hello!

  I recently bought a HP Pavilion desktop computer and connected to my all in one HP officejet 6500 a more printer. I tried to use the scan function and a message informing that no computer has been detected.  I tried to install the CD however, a message appears indicating that the operating system on this computer was not supported.  Message continued, "the software can be installed on computers running the following systems, Windows XP, Windows Vista or Windows 7" (my old computer that was connected to the printer work with Windows Vista). The message advised me to upgrade the operating system on this computer or install this software on any other computer system.  I don't know what to do to get this printer compatible with my new computer.  Is this possible?  Help, please!

  Hi there lavlock, RnRMusicMan is absent today. With 48 hours removed from this post, you are still in place and scanning? If so, I've always been a strong supporter of, 'if it ain't broke, don't fix it. "

• PhotoSmart C3180: Warning incorrect PhotoSmart C3180 disconnected

  I had to reinstall the printer software and updates.

  The printer works now much time printing and scanning, yet when I call the HP Solution Center

  a warning that the unit is unplugged.

  Troubleshooting routines do not indicate any problem.

  How can I rturn warning off?

  Hi @Clawinus,

  Welcome to the Forums of HP Support! I see that you are able to print and scan using your HP Photosmart C3180 with computer running Windows 8.1 operating system. However, shows the status of the printer in the solution center as disconnected.

  I would like you to go ahead and start printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  What is the PSDR? Do you still see the error message?

  When you upgraded to 8.1 Windows operating system you also update the software and drivers for the C3180 PS?

  Are there Windows updates that must be installed?

  Please get back to me with the information requested.

  Thank you for being a part of the community of HP. If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Photosmart C3180: Parse error! 8, [(4.0,-2147417851)]

  Scanning problem!

  I can make copies, but I can't scan!

  There is no connection problem...

  I have updated software...

  I checked with the tool hp applications...

  I tried in several PCs...

  I have read the HP forums and anyone ever responded in the same error issues

  I encounter this error in the two printers all-in-one Deskjet 2050a and C3180!

  @DSpa,

  Welcome to the community of HP,

  I hope I can help you with the error scan "8, [(4.0,-2147417851)]" you note on your computers. I have a few in mind thinking about you to start troubleshooting the concern. I would like to answer you to me when you have completed the steps and I would like to know what happened please!

  1. uninstall the printer softwarefor the printer Deskjet 2050 a via the Control Panel, and then restart your computer.

  2. complete a level 3 Uninstall to uninstall the C3180. There are 2 ways to complete uninstallation, please take the steps appropriate to your situation:

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open "Computer", and then right click on CD drive and open

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe.

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads .html

  9. open again the temporary folder and delete temporary files

  10 download the drivers and full software features: here: all-in-one printer, HP Photosmart C3180

  11 start the download to reinstall the printer

  12 install the printer Deskjet 2050 here: HP Deskjet 2050 A all-in-One Printer - J510g

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe.

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads .html

  9. open again the temporary folder and delete temporary files

  10 download the drivers and full software features: here: all-in-one printer, HP Photosmart C3180

  11 start the download to reinstall the printer

  12 install the printer Deskjet 2050 here: HP Deskjet 2050 A all-in-One Printer - J510g

  Good luck! I hope to hear the results

  If you want to thank me for my answer a helping hand of loan, click on the below!

• lost my installation cd and now have a new computer

  How to install my printer/copier on my new computer?

  Here is the link for your drivers, just select your operating system.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/