Printer HP Photosmart D7360

Similar Questions

• is the driver for win 8 for the printer photosmart D7360 RGB or CMYK?

  Hello

  I'll use Lightroom 4.2 (under win 8 64) and will have calibrated the monitor and the printer (HP Photosmart D7360) by colormunki photo.

  When the printer profile is generated by colormunki, according to the real printer driver, they will be RGB or CMYK profile.  Apparently, 4.2 LR will only show printer profiles to use if the printer driver is of type RGB.  So if it's CMYK, I would not be able to use the printing profile in LR.

  Is someone can you please tell me if this printer driver is RGB or CMYK?

  Any help will be greatly appreciated!

  Kind regards

  The pilot waiting for RGB data.  The real color in the printer inks use CMYK, but managed by the driver, applications need to send RGB data to the driver.

• Two printers HP Photosmart D7360 print suddenly all green!

  I have a HP Photosmart D7360. My husband has one too. We bought at the same time over 2.5 years. Mine worked fine until yesterday, when he began to print everything with a green tint. I did all the HP site and forums suggest, clean the print head, installed all new HP Vivera cartridges, and I use HP paper too (always did that). Always green printing. To exclude a hardware problem, I removed the printer from my computer, uninstalled all the software, etc., then hung and installed the printer from my husband. Hers is too green print on my computer. Two printers print perfectly on his computer. Obviously, the problem isn't with the printers but with a setting or something like on my computer. I tried everything, different applications of printing, different settings, no solution. The only thing I did is "calibrate the color" - because I don't have this option! I click on the HP, then the printer Toolbox Solution Center, but it gives me only four options: to clean the print head, in order to align the printer, to print a diagnostic page, and print a test page. NO 'calibrate color"everywhere there... Please, help me, I'm at my wits end with! Thank you!

  UPDATE:

  I think that this problem is caused by a defective paper. I bought a new pack, the first two pages came out very well, so - same story once again, all green. There is no problem when I print other documents (plain of HP, HP Everyday, Kodak Ultra Premium and Epson photo paper).

  I'm really upset about it. I know defective paper has guaranteed and can be replaced. but who will replace the ink of this time and constly? Where is the quality control?

• My computer freezes when I turn off the printer. HP D7360, Windows Desktop.Photosmart 7

  When I turn my printer off the computer crashes.  HP desktop computer.  Windows 7.  Photosmart D7360.

  I reinstalled the drivers.

  Have you tried a different usb cable? It could be that the usb cable is grounded on which could be a short circuit in the usb cable, or the printer port. Although it is also possible that this is the USB controller on the motherboard of your computer to try another cable is fixed not try with another computer if possible. If the other computer does not have any problems, then it's HP desktop computer. When you do that, you are out of my field of expertise friend . (In other words, if this does not work, try your luck on the forums of office or by calling the 1-800-474-6836)

  I hope this helps!

• HP Photosmart D7360

  I'm working on a Photosmart D7360 printer.  'Training' rollers do not turn for the supply of paper for printing.  When you try to print a test page, no paper is 'loaded '.  Finally, the error returns "on paper", even though a large paper is in the tray.

  Any advice/suggestions are appreciated.  Thanks in advance.

  Taking roll can be released.  There are a few things to try before you look for in a replacement.  First follow step 3 in the section Solution 2 in this paper to clean the printer rollers.  If your still having the problem, try to do a hard reset to clear the glitches in the firmware that could be the cause.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug everything up and turn on the printer.
  6. See if it will print.

  That's all you can do.  If it still doesn't work after the hard reset, you will need to replace the printer.

• Photosmart D7360: Photosmart D7360

  Every time I have to send anything to the printer it just guard crushing the paper up to cancel printing.  Each book has 1 small line of different characters in the upper left corner... Black triangles for most & squares, but also * and ^.  Everyone?

  Hello @pastel,

  Welcome to the Forums of HP Support!

  I understand you get text truncated when you print from your Windows 7 computer to your HP Photosmart D7360 printer. I would like to help you to solve this problem today. There are a few different things that can cause the truncated text and symbols to print from products, they include network problems, printer hardware problems or conflicts of driver on your computer. Please follow the steps below to resolve this issue.

  To begin, please can I you click here. Once the support document opens, select the drop-down list for Windows 7 and Windows Vista. Please follow the Solutions listed for this problem.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Photosmart D7360 ink system failure error: 0xc18a0206

  I tried to print a doc then do not use this printer for over a year. The ink system failure message appeared when I turned on the printer, so I replaced all the old cartridges with new ones. The message persists, and I can not print even a sample or Test page. My page to print remains in the queue. I tried to reset several times with the method of disposal of recommended power cord. Always with the same result, ink system failure error: 0xc18a0206. This machine is maybe just too old. After spending over $ 100.00 on new cartridges that would be very disappointing. I use a Sony Vaio under Windows 7 Home Premium laptop, but since I can't print a test or sample, according to me, that question must be in the printer.  I'm holding off on the sledge hammer method for now. Help, please.

  Hey hphippie,

  I see that you are faced with an ink system failure error code on your Photosmart D7360.  Looks like that sitting for a while can be brought to shame in the printer.  I recommend following the steps outlined in the document below link for troubleshooting an ink system failure error code.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Let me know how it goes,
  Jason

• Photosmart D7360 suddenly doesn't recognize my network

  I have my Photosmart D7360 connected to my desktop pc, and I am running wireless, through a FIOS router to my laptop.  Everything worked fine, until today.  Suddenly, my laptop cannot send a print job on my printer.  It appears as queued on my pc, even if it shows itself as being sent on the laptop.  Printer sharing are enabled, with the same name of the printer by default on both PCs.  I hope that someone will have an idea.  Thank you.

  Sometimes I feel as if I have gremlins in my computer.  Yesterday, several times, I tried a reboot to see if it will prepare the icon, with no luck.  At the end of the day, I stop the pc.  This morning, I start it upward, and the icon has disappeared.  I don't know what fixed it, but its running OK now.  Thank you.

• Printer HP Photosmart 8750 on Windows XP, do not print within the frame.

  Printer HP Photosmart 8750 on Windows XP does not print photo correctly and cannot be adjusted manually to print in time. Printing is too high or off the coast on one side or the other. How can I fix this?

  Hello
  
  Try to download and run the doctor print and scan located here:
  
  http://support.HP.com/us-en/document/c03275041
  
  It can fix its own much and if not to give a better idea of what is happening.
  
  Good luck!

• HP Photosmart 7660: Need 10 Windows driver for printer HP Photosmart 7660

  After having read the HP - compatible printers Windows 10 printers list @ http://support.hp.com/us-en/document/c04658195 , it says that my HP Photosmart 7660 is not supported by Windows 10 and there is no additional options.

  Does anyone know of an HP generic or other certified printer driver that will work for the printer HP Photosmart 7660 with Windows 10?  I got my printer HP Photosmart 7660 since 2004 and it is the best printer I've ever owned, and I hate the idea of not being able to use this printer if I upgrade my computer to Windows 10.

  Thank you in advance for your help!

  ghudson wrote:
  

  After having read the HP - compatible printers Windows 10 printers list @ http://support.hp.com/us-en/document/c04658195 , it says that my HP Photosmart 7660 is not supported by Windows 10 and there is no additional options.
  
  Does anyone know of an HP generic or other certified printer driver that will work for the printer HP Photosmart 7660 with Windows 10?  I got my printer HP Photosmart 7660 since 2004 and it is the best printer I've ever owned, and I hate the idea of not being able to use this printer if I upgrade my computer to Windows 10.
  
  Thank you in advance for your help!

  Finally, I bit the bullet and upgraded my computer Windows 7 HP for Windows 10. None of the suggestions listed in the HP forums to be able to use another driver with Windows 10 has worked for me. Some got to the printer, but any suggestions that would get to the printer the printer print pages additional and acting as a print job was sent to the printer. Then I tried something different and it worked!

  Here are the steps I took to get my old HP Photosmart 7660 printer yet faithful to work properly with Windows 10.

  Since the page devices and printers in Control Panel...

  1) click on add a printer

  (2) click on the printer that I want isn't listed

  (3) select Add a local printer with manual settings

  (4) select use an existing port and change the option in USB001

  5) click the Windows Update button to update the list of drivers and printer available

  (6) Select manufacturer: Hewlett-Packard

  (7) select Printers: series HP Photosmart 7760

  (8) enter the name of the printer: HP Photosmart 7660

  It works for me with Windows 10 and the bonus is that the advanced options are more that you want or need. No thanks to HP for not providing a suggestion valid works to their customers who need a Windows 10 print driver to use with their old HP Photosmart 7660 printer.

  For those of you who have found this post and if my suggestion also works for you... Enjoy!

• No ability to scan with printer HP Photosmart D110a

  With the recent updates, I lost the ability to scan my printer HP Photosmart D110a model.  I tried to re - load the disc where I initially installed the printer.  I also tried downloading and updating online services.  I have a PC HP Pavilion Elite HPE running the Windows 7 operating system.

  What can we do?  What else is there to do!

  Rudy1906,

  I uninstalled the existing software, installed the downloaded version of the most recent features complete drivers for the D110a, then reloaded my original installation on download CD, and now it seems to work.  I can now go to the center of Solution and I guess that all other errors are "supported".

  The only thing I did differently in this re - install was re - load the CD on the download.

  Thanks for the help...

• Printer HP Photosmart 7525 Wizard is not found

  I need help to find my HP Photosmart e - all in a Wizard of the printer.  I want her to be as an icon on my desktop.  (Like Solution HP) used to do.

  I want to scan multiple images at once/harvest/and save each to a different file.

  Help

  emgerald

  Emgerald,

  Welcome to the HP Forum.

  Please keep with steps you have already done...

  First you must have installed full feature software.

  General instructions to install the printer software

  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  ·         Open e-all-in-one printer, HP Photosmart 7525 drivers

  ·         Enter your operating system from the menu drop-down

  ·         Click NEXT and scroll down

  ·         Find the category driver - software product installation

  ·         Select the base driver, e-print, or a full features software

  ·         Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·          On the bottom half of the main Web page for your printer, you can find some helpful videos to help with the installation of the printer software.

  ·          Scroll down the list of videos back until you find the video that best fits your situation.

  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.
  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Setup software printer should provide an icon Printer Wizard on your desktop that you can use to "scan a Photo Document or".

  Shortcut:

  If the printer icon Wizard is not placed on the desktop during installation, then you can search for the program Assistant printer on your computer.

  Assuming that the printing software full feature software properly installed, you just find the program you can make your own shortcut to the printer for your Office Assistant.

  The following CAN help...

  • Open a Windows Explorer window
  • Go to C:\Program Files *
  • You might find a folder named for your printing software (photosmart 7525)
  • Navigate to the Bin subfolder
  • Search for a program called OR similar
  • NOTE: The program will NOT be appointed Assistant printer
  • Right click on this program > select send to desktop to make a shortcut

  ** Windows 7 may be different - look in C:\Program Files (x 86) \HP if you must, although I suspect the only program you will find there the scanner program...

  ============================================================================

  Multiple scan / crop to save a characteristic single file:

  There are two ways to end up with what you want, even if I have not found a way to get the 7520 (very similar to your model) to do what I think you are looking for.

  I agree that it is useful to have.   If we have zillions of old photos to scan, need to scan a photo at a time - or their cropping manually - can make your brain freeze.

  If the feature is available on your model, the magic is in the analysis in the Assistant printer model - and relaxation is perhaps not too much harder that separate the pictures far enough part to trigger the sensor reads what is on the glass.  It's been a while since I've done this - but I'm sure it was pretty straightforward (from the point of view of the user).

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

  With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

  What operating system do you use?

  What did you do to make them reappear, or just is it?

  Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?

• Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

  My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

  Hello

  Software for Win 8.1 can be downloaded from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

• Scan multiple pages to a PDF file on a printer HP PHotosmart 6525

  I just bought printer HP PHotosmart 6525 and I can't seem to understand how to create a PDF file of several pages of analysis.

  I checked this forum using web and couldn't find the answer.

  Once the page is scanned, I gives me an option to save the file. The only other option is "Cancel".  After saving the file, I was able to scan another page, which is saved in a different file. How can I keep other pages of analysis without saving the file?

  The parameters of scanning as follows:

  Article type: Document
  Type filey: PDF
  The option to save each page in its own file is not checked.

  I use my computer HP software. I tried the digitization of the document of the control panel of the pronter with the same results. No possibility to scan several pages.

  I use Win 7/64-bit.

  Hello

  Open the HP software and select scan a Document or Photo.

  Select the PDF option.

  Be sure to check the preview Scan and set the resolution to 300 DPI or below.

  Click Scan and use the pages add to scan additional pages.

  Once completed the analysis, click Save.

  Shlomi