Printer not visible when you try to add

Similar Questions

• C drive is not visible when you try to defragment

  Original title: errors of Volume disk, drive C is not visible when you try to defragment drive C in the maintenance of the system

  I tried to do a regular defrag of my C drive and received a message that there is Volume disk errors. The utility asked to reboot the system and clean the C drive. But when I access the defragment utility, drive C is not present there to use the application... suggestions?

  Hi Dante62,

  I suggest trying these steps provided below and check if the problem is resolved.

  Step 1:

  a. right click on the c drive.
  b. Select Properties.
  (c) under the Tools tab.
  d. Select Defragment now under defragmentation.

  Step 2:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Error: Windows print spooler is not running when you try to add the HP printer wireless

  I'm trying to start the Windows printer spooler and do not know how.  Can anyone help?

  Thank you

  Original title: I TRY to ADD a PRINTER of HP WIRELES in MY PORTABLE AND I GET AN ERROR MESSAGE THAT SAYS THAT my WINDOWS PRINT SPOOLER NOTR IS RUNNIN'.  How can I START THE SPOOLER?

  Hi Samsodano,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit to the below mentioned link and check if it works.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

   

  Method 2: You can consult the following Microsoft article Knowledge Base and follow the steps in the article to resolve the problem.

   

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP

  http://support.Microsoft.com/kb/324757

  Let us know if it helps.

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Player 11 says disc not empty when you try to burn

  When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc.  Sometimes, it will finally work after multiple attempts; sometimes not!

  Hi doodle75,

  You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?

  If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.

  To resolve this problem, save the data to a new CD - R or CD - RW.

  Reference:

  You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11

  http://support.Microsoft.com/kb/930370

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".

  http://support.Microsoft.com/kb/927814

  Please see the link below for more information

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  Hi Meenakshi,

  Thanks for getting back to me. The problem is solved now. We had to reinstall Acrobat DC who, for some reason, had disappeared.

  Regards, Randy

• my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  Return to the previous MAC OS until it's resolved.

  Lightroom and El Capitan | Mac OS 10.11

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.