Printer problems - HP 5150 printer fails to print

Similar Questions

• I have a problem of "Secure connection failed", access to an HTTPS site.

  I have a problem of "Secure connection failed", access to an HTTPS site. It is of this type:

  Your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number.
  

  (Error code: sec_error_reused_issuer_and_serial)

  OK, I have not read the support article carefully enough - it even says that this dialogue cannot be exceeded by adding an exception.
  you are most likely right that this problem arises because the same cert is used for different sites. this support article describes a work around, but it is probable, not applicable to your situation, since you would also have to remove the certification authority and which would create all sorts of problems as your production site will tend to choose an a valid CA certificate.

  Please contact your IT department or the problem of certificate on two different servers or to allow you to run a version of portable firefox where you can mess with the certificate store and the authorities of trust in order to access the test server.

• Receive emails "there is a technical problem. Try again"fails after after many attempts to open.

  Two problems: -.
  1. certain emails receive State "there is a technical problem. Try again"fails after after many attempts to open.

  2. I get Emails with Photos as attachments or a text document. When I send teas on friends the recipient says - no image received

  7 Windows Yes uses customer access to Emails
  Provider is TalkTalk

  
  What client? If WLMail, ask here.
   
  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Satellite A210 - 15K: webcam problem - graphics make it fail

  Hello

  I have a toshiba A210 - 15K, but I seem to have a problem with the integrated webcam for laptops. When I turn it on I can use it without problems all the time, but sometimes after a few hours of no use when I try to use it again it gives me the following message: "chart make fail" and it runs at all.

  In order to make it work again I have to restart the computer, and even if I restart sometimes it does not start.

  Someone knows how to fix this?

  Thank you

  I noticed the same thing on my Satellite P200. After reboot, everything works again. I don't use a webcam so often and it is not so important to me, but you can try to stop (exit) web cam software and start it again.

  Maybe this will help. Can you please send the result? Right now my cam works well and I can't wait to check this option only.

• Recent problems of following Win7 failed to install software from Comcast

  Don't know where to start.  I can only suspect that all the problems are related to a single event and the more likely event, due to timing, has been a download, but Comcast Office software installation failed (automated in Comcast cable internet installation).  I suspect also that because only one sent to 'freeze' the problems here mentions conflict with the AV software and AV drivers may have been part of the package of Comcast.  Don't know.

  PROBLEMS:

  I can't uninstall the software.  Windows Installer "hangs" on "Preparing to install" and nothing happens.  I have to force close with the Task Manager.  Usually, that corrupts the images of my office, removes all the desktop icons and the Start button, forcing me to reboot.  (Near as I can tell, install the Manager affects Explorer.exe some how.)

  I can't install the software. The same problem. The program hangs indefinitely on "Preparing to unistall."

  After attempt to cancel install or uninstall events (default) after forcing the closure with the Task Manager, and after the Office covers without icons, the button start and the bar application (as if Explorer had closed, but froze on the chart in office), by withdrawing to the Task Manager to correct this, I chose the option "disconnect".  This allows me to disconnect and then reopen it in one.  However, once connected, I hit a black screen and the Task Manager shows a lot of applications is open twice in the list of open applications - and resident drivers.  It seems that the original 'disconnect' did not stop those apps, but the 'log back"repeated their.  It ends with a black screen every time and requires the computer to be turned off (where it crashes and then on the "shutting down" screen.)  See below.

  Restart or stop mode, closing blocks indefinitely. Occasionally, there is some disk activity hard, but in most cases, once it freezes, the hard disk is idle - but the computer does not move out of the blue 'Stop' window

  Microsoft Fix It will start, but will block indefinitely on "problems."  Review of activity in the the Task Manager, the program once hung in the "detection" uses no processor and record any activity. Rarely, the hard drive light flashes and doesn't show any use of research. Cancel will close the program without the need to force close with the Task Manager.

  04:00 - Windows Media Center to "optimize" attempts and crashes in the process.  The next morning, when found, WMC is frozen, will not respond to the mouse or remote control and must be forced closed in the Task Manager.  Once done, Win7 and WMC act normally unless specific other problems above.

  I also note that Microsoft Updates have been found and downloaded but haven't installed auto.  At least three recent updates are sitting waiting for my permission to install.  A Java Update yet, so.  Normally all these install automatically without my permission.  After an indefinite period, the close button appears that updates are waiting for a re-boot. I have allowed to happen once--sitting with a window "Please do not unplug or force close - update install" 9 hours - at work.  The machine was frozen.  No evidence of the update took place and all listed pending updates are pending.

  I run Microsoft Security Essentials and PC Tools Firewall more and feel confident that no virus does not cause this problem. If I were an academic assumption, the machine seems to block a lot of temporary programs who want to read or write to the hard disk.  But not all, as I stream video, record TV broadcast in WMC, use Firefox and Thunderbird - all without any problem.

  As I definitely want to remove the Comcast installs and a remote program of ESPN WMC get Windows Installer working properly is quite critical.  Wanting to use the program Fix It to review and fix registry problems is also strongly desired.  Here, your recommendations will be greatly appreciated.  Thank you.

  Phew!  What a ride.  But it seems that it's over.  Here are the details.

  Recovery always disc manufacturer's software on the open - so I couldn't do the disks.  All diagnostic HPs also hung on open software.  The HP site so their software were so any relief.

  I ran chkdsk /f and chkdsk/r with no problems found.  I ran the diagnostic memory of Win7 with no problems found.

  Because my last change encouraging (get the MSE to install a virus definition update) happened when I was able to stop WU Setup with "net stop wuauserv" I decided to try again.  It appeared to fail the first two attempts (each after a reboot), but by the fourth attempt and restarting, I managed to close.  The immediate change was amazing.

  However, another caveat.  At the time of the software of Comcast has failed, install the 10/26 and as the failure of the system, Flash and MSE updates began editing, I had also signed a 80 GB USB flash drive to the system. Read about similar problems with Windows 2000, I tried unplugging my LAN to see if it was the cause of the conflict.  (The LAN connection was started 10/26 - connecting the device to the router to Comcast).  There was no change.  I rebooted, I decided to unplug the 80 gig USB drive in case it was cause of conflict.

  OMG.  Either due to the success stops Installer WU of the unplug of USB or both-, I got a clean shutdown - no blocking.  Windows open in record time and as I began checking the integrity previously does not apps, MSE prompted me to fast and ripped analysis through completion in time record (I ran a full scan later without any result of virus.)

  I have considered a 'net start' but decided against it, as the machine was finally functioning normally.  The failure of the single application has been and continues to be: PC Tools Firewall.  Apps, I wanted to uninstall and other pending installation, all worked perfectly. Looking to restart, the listed stop one button update pending (not sure if it was a system) and that too worked without problem. A single update took 20-30 seconds and then stop without hanging up - as she had for more than a week.

  On the other 4 hours last night, the machine appeared to be back to work properly in all areas except PC Tools Firewall.  What had caused this wonderful series of problems disappeared - either because of the "net stop" or the removal of the 80 gig USB drive - or both.

  I have not restarted install WU by using "net start" and I have no immediate plans to do so. (As far as I know, it restarts after a few restart.)  I will check the State of system update soon and restart, if necessary.  But in getting my machine in perfect health, I will be slow to install WU get reactivated by me.

  Regarding the USB, I'll have to check on another machine.  I had used for port of some files on my machine (for portability) and do not need what he fixed permanently to this PC.  It worked without error during file transfer and I am unaware that she had no failures that could affect the PC.  Never the less, as disconnect seems to coincide with getting the health of my back of the machine, I won't be in haste to reconnect it.

  Thanks for your help.  Like I said, it was quite a ride.   But I think I'm out of the cold, dark woods and running with a sound machine once more.

• Satellite A200 - problem WebCam - webcam readers failed

  Hello

  I need help with the webcam integrated my A200 Satellite.

  Whenever I start the laptop that I got a message saying that readers of the webcam does not and I have to restart the computer, but the problem persists.

  I downloaded a update webcam driver, but nothing.

  Can someone give me an idea of what's going on?

  Thank you!

  Hello

  Are you using the OS preinstalled Toshiba? Is it Vista or Win XP?
  AFAIK that Vista needs Sp1 and other updates MS in order to manage drivers and 3rd software part correctly.

  I have internal webcam and I m using Vista and Win XP.
  I deleted the software for the webcam to start in msconfig.
  This prevents the webcam of the automatic start during windows startup
  You should do it too

• Problems of acquisition & visualization: fails at 100 Hz, OK more low or more freqs

  Hi all

  I have some data acquisition & visualitzating problems.

  The acquired data is a voltage (0 - 10V) from RDP LVDT & conditioner. My pourpose is simple: I want to gain everything by visualizing and recording to disk. I use a card BNC-2101 & 6062E. I also use LabView 8.5 on Windows XP s.p.3. I tried three ways: my own .vi and examples of LabView with internal clock and the external clock. They all consist of two steps: aquire, visualize data on a graph. and my own .vi also saves the data in a .lvm.

  On the first try, I was able to acquire data with sample on request mode. But I want to get to a known frequency, so I put 1-sample (controlled HW). I set the frequency and the number of samples as well as the number of samples is of approximately 1/5 of the frequency, for a rate of graphics path 5 times / sec., BUT I found the following problems:

  (1) for the acquisition in the low frequencies, say 50 Hz, there is a large gap between read data a shown in the data graphic: from 2 to 8 seconds.

  (2) for the acquisition to high and very high frequencies, say 20 kHz to 100 kHz, the graphic works OK. But in this way, the file I'm writing is too much. I don't understand why when I put the computer work harder, with more data, it appears without delay.

  (3) for the acquisition to 100 Hz, it does not work. An error (just know don't remember the #, is one who says this time-out has been reached whithout having given to read aviable). 99.9 Hz works, but not at 100 Hz or 200 Hz.  I really don't understand this point.

  Can someone help me please?

  Thank you for your attention,

  usuario

  Just writing to tell you that we have tried with another computer and had no problems with the hardware and the same .vi.

  And have had no problem for the las 2 months.

  Thank you all for your dedication.

• Problems of frame - updates fail to install

  original title: problems of frame

  When downloading the Microsoft updates, everything installs fine except for the updates of the framework... I don't know if they are important or what.they do.
  I was told to uninstall all components of framework on my computer, and then reinstall., but this seems drastic.
  Can someone advise?

  Hi TerryShaw,

  The following article should help you troubleshoot setup of .net framework update issues.

  Fix the .NET Framework

• Password Lock problem. Too many failed attempts.

  My computer is locked because of too many password attempts failed.

  I know my password, but my kids played with him and based on the
  Enter the key too many times in the log on screen.

  Now, if I have the password, it will not accept
  the password more.

  How to unlock my computer, so he will accept my correct password
  Once again?

  Of course, Microsoft would have not designed this software
  so that if a stranger, or my child, because of many down
  attempts would not only locked their output, but
  Me too.

  There must be a way to unlock this computer, if I
  the correct password.

  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  If you have another administrator account, sign in on that one.  Once you're connected, go to the locked account and use manage anouther account to access and then reset the password (do it with any other such accounts).  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.  You must keep two administrator accounts and the standard account for everyday use by yourself (create these accounts now while you think about it if this is not the case).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Problem the firmware upgrade failed WRT54G v8.2

  Today I tried to upgrade my WRT54G Router v8.2 for the latest Linksys firmware. But the upgrade was repeated each time when the progress bar reaches about 75%. It lasted more than 30 minutes and I had stopped the upgrade. Then the router has stopped working. I have reset and hard reset the router. I also tried the method of tftp to upgrade the firmware again. But the problem is still there. When I ping 192.168.1.1, I always get the message "Destination host unreachable". Could someone help me solve this problem? The power and light of the ethernet port light are always on. Is it possible to solve the problem? Any information is appreciated. Thank you very much.

  Do not use the wireless computer to update the firmware. Hard-reset the router for 1 minute and try this link and check if it works...

• I have a problem with my keyboard failed on dell insirion laptop

  Reference op inspiron Dell laptop keys are missed ignition

  If the problem occurred after a windows update, use the system restore for a period prior to this update, and then run windows update > cut settings, recommended to disable the updates.

  If something else, explain what exactly means moving

• Personal media player problem - Windows delayed write failed

  I have a 1 TB Personal Media Drive (hd10000x) which does not with my e9120f machine Pavilion Elite running Windows 7.  When I try to write to the disk using the dedicated Bay or USB connection, he wrote a small number of files (anywhere from 8-100), then an error "the system cannot find the specified file.  In Event Viewer-Windows Logs------system I get thousands of warnings "an error was detected on device \Device\Harddisk6\DR6" and "the system does not have empty data in the transaction log.»  Corruption may occur.

  This is my second personal media player, I had the same problem with the first, and he returned after spending 90 minutes online with the help of HP trying to diagnose the problem (with a friendly assistance technician yet not very knowledgable).  Its best estimate was Norton AntiVirus, but the drive did not work when the machine has been started in Mode safe and AntiVirus software has not loaded.

  The drive works fine with my old Dell laptop Windows XP, but not with my brand new HP desktop computer.  I think that it must be a driver conflict but can't find anything in the forums or elsewhere online.

  Ideas anyone?

  .

  Who seems to have done the trick - thanks

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• Problems with Adobe Reader - failed to install properly

  I had Adobe Reader is installed on my Windows 7 laptop for a while and it worked perfectly until recently.  It works automatically, but recently, when I tried to download a document that I give permission to Adobe, I've been happy to work this way even if it caused irritation.  Tonight Adobe Reader would not work, but next to the Adobe Reader has been blocked because "it's outdated".  I tried to update, but get the message "that a single instance of the application can run". "."  I tried to solve this problem in uninstalling and reinstalling, but I still get the last message. When I finally installed the program, it has not completed the installation as it does not appear as an installed program, I don't have a clue what to do to fix this problem and would appreciate your help.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Problem with preloader has failed on nextFrame();

  The preloader, I created only the transition to the next section, it crashes just on the chassis of the preloader to 0%.  Here is my code:

  Stop();

  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader (evtObj:ProgressEvent): void {}
  
  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
  preloader_bar. Width = (% / 100) * 600;
  preloader_txt. Text = "Loading" + percent + "%";
  
  If (p == 100) {}
  nextFrame();
  this.removeEventListener (ProgressEvent.PROGRESS, updatePreloader);
  }
  }

  The problem is when the swf file is called online, it stops on the 1st image and shows the preloader to 0% and does nothing.  I can right click on the embedded flash swf nonfunctional and select read and it works very well. but it makes no sense for my users to do the same thing...  However, when the file is recalled after the first attempt it works very well.  Any ideas what could happen?

  :

  {if(this.framesLoaded==This.totalFrames)}
  nextFrame();
  } else {}
  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);
  }