Printer Spooler issues, windows 7

Similar Questions

• Issues of print spooler for Windows XP Professional

  Hello.  I am having some problems with the print on my Windows XP Pro machine spooler.  The print spooler service stops.  I went into the service and restart the print spooler and a few seconds later it stopped again.  I currently have a print job in the queue, but when I try to delete the spooler stops as well, taking away my ability to delete the job.  In addition, he keeps giving me the error message pertaining to the print spooler stop.  Does anyone know of any fix for this problem?

  Thank you.

  At a command prompt, delete the print queue.

  1. to open a command prompt type CMD in the box run from the start menu and press (or click OK).

  2. at the command prompt, enter the following commands, pressing after each:

  net stop spooler
  del/q %SystemRoot%\system32\spool\printers\*.*
  net start spooler

  Search in the cases where the problem of the spooler stop journal of indexes.  To open the event log type eventvwr.msc in the area run menu start, look in the log system spooler related errors.

  John

• Windows7/printing spooling issue

  I have problems with my HP printer.  When I send documents to print it, he hangs up when the queue.  I tried to remove HP imaging and disabling hpqcxs08 in respect of services such as suggested in other issues of the forum.  The problem persists.  Our computer said that it could be related to Windows 7 Professional does not properly.  I bought a Dell with Windows 7 pre-loaded.  Can I uninstall Windows7 and easily download from the Internet?

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services

  3. Press ENTER and scroll down to print spooler

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation

• Had a problem with the print spooler in Windows server 2012 R2 so cannot print

  service has stopped several times to meet the demands of service control: print spooler

  Contact the service provider or system administrator on whether to disable this service until the problem is identified. You may have to restart the computer in safe mode you can turn off the service.

  Event ID - 7046

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• PRINTER SPOOLER ISSUES

  THE PRINTER WORKS CANNOT DO FOR THE PRINT SPOOLER IT SAYS HIS CUSTOM NOT ACTIVE I WOULD FIRST MAKE DEPENDENCIES HOW CAN I SOLVE THIS

  Hello

  Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.

  Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• Print spooler starts windows 7 error 1053

  I am trying to install a printer in windows 7, but the print spooler does not start, so I can't install

  I looked at the menu services.msc and attempted to manually restart the spooler is at this time that I get the error msg:
  Error 1053 did not timely, etc. I tried restarting the computer but to no avail.

  What should I do because I have no ability to print but I scan?

  Joe

  The registry key seems OK.

  You can run the System File Checker to verify the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  A system restore will not work in this situation the printer never worked.

• How can I fix a printer spooler issue: when I reset the spooler will return to stop mode.

  When I want to use my computer, I have to insert the CD of Lexmark and reinstall it.  My operating system is XP Pro and I use a Lexmark Z55 printer.

  I have to re - install the printer almost after each use.  I went through technical help with Lexmark and they advise me to contact Microsoft.

  The problem is the printer spooler and it will go back to stop mode after each use.

  Would appreciate any help

  Thank you

  I'm not Bruce (although I can see why you might have thought if :-)).

  You haven't seen a 'Version 3' as in this picture (or, as Bruce page, may be Version 2 or both):

  It can be a bit difficult to find the utility appropriate among everything in the Resource Kit.  Try to download just cleanspl.exe there--> http://honestpchelp.com/2011/cleanspl-exe-print-spooler-cleaner/ (which is not my site, but I downloaded the file in the past and it seems to be both authentic and malware-free).

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• How can I activate the print spooler service on

  My computer says the print spooler service stops when I'm going to use a printer. How do I reactivate.

  Hello
  Please tell us the version of the Windows operating system you are running on your computer.

  I'd take a peek at this thread as well. It is specific to Windows 7, but you should be able to many of the same steps apply to Windows Vista or Windows XP if you happen to have one of the people.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-issues-in-Windows-7/3ae31e43-71ce-4847-ad9e-1d2936eabb83

  I hope this helps. Just reply to the results.

• How can I activate my printer spooler

  Hello, I am currently using Windows XP Home Edition and I was attacked by a Trojan virus. I could get the PC in safe mode and by installing an anti-malware program, but for some reason that I can't print more than the laptop.

  Whenever I try to install the CD for my HP photosmart printer, it passes through the installation process and I am able to print after that I connected the USB cord to the laptop. But then when I restart the computer, my printer icon does not appear in the folder printer & faxes.
  When I try to add my printer, a message that "the print spooler service is does not work."
  What driver do I download on microsoft.com or is there another way I can activate the printer spooler in Windows XP?

  Hi JamesSimms418.

  Welcome to the Microsoft community. According to the description of the problem, you cannot print.

  I suggest you to visit these links:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1 
   
  You cannot add a printer and you receive Printer Spooler error messages in Windows XP http://support.microsoft.com/kb/324757/lt
   

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

   

• 0x800706b9 print spooler error

  I have a 8.1 Microsoft Windows and a HP Desktop 2512.

  My computer no longer recognises my printer. I keep receiveing an error of 0x800706b9 print spooler

  I tried the net start spooler command, but that has failed. What to do next? Help, please!

  Hey @crod57,

  Welcome to the Forums of HP Support!

  I understand that you are no longer able to print from your computer Windows 8.1 for the all-in-one printer HP Deskjet 2512 as your computer reports a 'print spooler error: 0x800706b9'. I would like to help you today with the resolution of this error of print spooler. Now, just so you know, the print spooler is a feature of your operating system. It is integrated with your Windows computer. Essentially, it's the printing system built into your computer. Printers rely on the print spooler works to print. The spooler is not specific to HP. So, I will be able to offer you a few steps of standard troubleshooting on the computer. However, if the problem persists you may need to talk with Microsoft Product Support or your computer manufacturer to solve this problem of operating system. That being said, can I please have you follow the steps below to resolve this issue.

  Step 1: Check print spooler:

  1. Open your screen to Start by clicking the Windows button on the lower left side of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. In the start screen, type run
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here

  Step 2: Check the spooler folder:

  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder

  Step 3: Start Spooler and audit dependencies:

  1 open the Services window we previously minimized

  2. click on print spooler to highlight

  3. click on Start in the upper left corner

  4. If you get an error message please take note of this

  5. If the print spooler starts successfully you will see "stop and restart" as your options at the top left

  6. then, double left click on print spooler. A print spooler properties window is now open. Click the connection tab at the top. Can you please make sure that it is set to Local System account and make sure that the check box is selected to "Allow the Service to interact with desktop".

  7. then click on the tab "dependencies". Please check which dependencies are listed. I need to know this if the problem persists when you have completed the steps I provide in this post.

  

  8. click on apply and OK for any changes that you have made the log tab. Close the Services window.

  Once the Print Spooler Service has started successfully, you should be able to access your printer HP Deskjet under devices and printers on your computer folder Windows 8.1. Also, you should be able to print. Can I please have you test the impression at this stage to confirm that the print spooler error has been resolved.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• DUFF1963 - how to enable printing spooling

  Original title: DUFF1963

  Need help to enable printing spooling in Windows 7

  Hello

  Thanks for posting your query in Microsoft Community.

  We need information so that we can better understand the following question:

  You have problems printing documents? If Yes, what is the complete error message you get?

  The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down

  If you need to follow the steps provided below print spooler:

  1. Click on start.
  2. Type services.msc in the search box, click on it to open it.
  3. You can get the print spooler and double-click it to open it.
  4. If the service status is stopped, then Start the service and check if you are able to print.

  If you encounter printing problems, you can run this fixit:
  http://support.Microsoft.com/mats/printing_problems

  Hope this information helps. Please reply with the status so that we can help you.

• Print spooler keeps restarting

  I messed up my print spooler in windows 7. It is in a reboot loop and does not allow me to do something. The fix to the Microsoft tool which usually works fine and deletes all printer drivers so that I can start again does not work in windows 7.
  How can I solve this problem in 7?

  Hello Methodman85,

  Please use the Forums for Microsoft Windows.

  Sorry, you experience this problem with your printer.  I suggest you submit your question on the link below for the Windows 7 Forums.  You can also search FAQ as well as ask a question.  Thank you!

  Windows 7
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  I would also try the steps below to see if that helps.  It is the same site where the Fix It tool.

  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx#EOD

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the print spooler service, and then click Properties.

  4. on the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When starting my computer, printers show as not specified, but is recognized to restart; cannot start the print spooler.

  When I start my computer (Windows 7), all my printers are inaccessible and labeled as "not specified"; When I reboot, they are all functional again.  Before restarting, I get an error message that the print spooler does not work.  When I try to start the print spooler, I 'Windows could nto start the spooler on Local computer service.  Error 1053: the service did not demand launch or timely control. »

  If you start/restart your PC twice before having all the features something interferes with the boot process.

  The problem occurs if you start own http://support.microsoft.com/kb/331796 NB this is the manual method not the FixIt

  And if the problem is still there on a place clean boot, and then if you start in safe mode what then?

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon