Printer status window interface stopped working

Similar Questions

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The printing status window interface stopped working

  After loading MS SP 2 for Vista, my laptop has stopped working due to a registry error (my best guess). With the help of a the manufacturer Gateway, laptop computer recovery disk works.  Reinstalled the desktop drivers and Dell AIO printer 960 & utilities, but cannot print because of "the printing status window interface has stopped working".  How can I fix it?

  Hi Tammy,

  I suggest you try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green checkmark beside your printer (Dell A960 printer). This check box indicates which product is the default printer for Windows.

  Also, make sure that the printer is not paused or offline.

  1. on the bar menu print queue, click on the printerand then locate suspend printing and printer use offline items in the menu.

  2. ensure that there is no check box next to each item. If a check mark appears next to each item, click to clear it.

  Change-your-printer default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  If the problem persists,

  Step 3: Download and install the latest drivers for printer from DELL website, click here for drivers

   

  For more information, see the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  You can check with DELL to known problems

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

   

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The job status window interface stopped working Dell AIO printer 968

  I bought a new computer with window 8, native. "Each connection with my previous devices ran quite well when it is installed automatically, except for AIO printer 968 Dell, I have installed a new driver from Dell, more precisely prescriptions Scanner is pritnting OK when I get this message" Job status etc.. "I have to accept twice this window to find a solution otherwise everything is blocked, then it starts to print, but it only prints what is like html text and not clear. How can I get normal printing without this message "State of work etc." and with all the text

  Rick

  What you are proposing, it's just what Dell US suggests on its website.

  I tried and it doesn't work.

  I tried once more and still the same message: employment status etc.

  Hope that dell wil solve his problem before buying one new another brand

  THA, ks, greetings and a happy new year

• Printer Status window Interface has stopped__

  Printer Status window interface stopped working

  Print sometimes and then stops.  I unplugged, rebooted and then it works?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Try to uninstall/reinstall the printer.

  And make sure you have the latest printer drivers downloaded from the printer manufacturer's Web site, not from Windows Update.

  See you soon.

  Mick Murphy - Microsoft partner

• Printing status window Interface has stopped working

  I have a new computer with Windows 8 and an old printer Dell720.  I found a driver and the printer works with the new computer.  The printer was working without any problems, when I received the message "the Print status window Interface has stopped working".  I also had a "Low Ink" pop-up window.

  Any help to solve this problem would be appreciated.

  OK, I found a way to deal with my problem.  Apparently the problem centered around the printer sends a message to the computer that the ink cartridge is low on ink.  I said to the computer I installed a new print cartridge (but I do not actually have) and now the printer works.

• Printing status windows interface has stopped working

  Original title: what to do when I try to print a statement and get a message {windows printer interface status stopped working]
  The document is through Adobe reader

  Hello

  1. what operating system you are using on the computer?
  2. What is the brand and model of the computer?
  3. not the problem only occurs when you try to print the document using adobe reader software?

  
  Method 1:
  You can try the procedure described in the link and check if it helps:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2:
  You can also see the following article from Adobe to solve the problems on the issue.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Alternatively, you can contact adobe about this issue.
  http://forums.Adobe.com/community/adobe_reader_forums

• M277 LaserJet MFP Pro: Printer 10 Windows just stopped working

  My printer worked for at least a month after the upgrade to Windows 10, and then it stopped working.

  Initially, I didn't find any game by default, and the ability to set it wouldn't work.  I tried to run the software install, V14309, but the installer just turn and quit, finally tells me to restart.  I did, the default value of the printer was there, I could change the default, but it wouldn't print and finally gave me a protection fault errors, telling me that the printer was not installed on this computer and restart my computer.

  Help!

  An update:

  After several reboots, the software uninstalled the software installation and after a reboot, I then reinstalled it.  He printed a copy of test, but when I checked on the printer to set preferences, it wrong agin similarly and told me not to have any software installed!

  A final update, I think:

  When I reinstalled the software I notice 2 printers: the original and a (1 copy) and the installation had set the default version (copy 1).  I tried to use the original and is the one who has failed and exploded with the error 0x1f622f2b.

  I then tried (copy 1) and guess what: what WORKED ON!

  Why is it so I have no idea.

  I spent a very unproductive hour, trying to get the help of telephone support HP in India.

• Stopped Printer Status window Interface - work

  Print 3 times then I get this message. I have restart computer, ptint 3 times and repeat the process. I have a Lexmark 8350 AIO. I uninstalled, run the tool cleanp Lexmark and re-installed new drivers from Lexmark. I thought that it is strictly a matter of Vista. How should I do?

  Hello
   
  Microsoft has an automatic convenience store to find and correct the mistakes of the printer. To download and run the automatic troubleshooting utility, visit the following link and click on the "Run now" button and follow the instructions in the wizard to run the tool.
  
  Printing problems and printing errors: http://support.microsoft.com/gp/printing_problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• F2180 errors at startup as follows - hpqst08.exe and HP CUE status root has stopped working

  I have a HP Deskjet F2180 all-in-One Printer Scanner Copier and is connected to a 32 bit Windows Vista computer.

  My F2180 now allows two error messages at startup as follows:-"hpqst08.exe" and then "HP CUE status root has stopped working."

  hpqst08.exe error reads "the application is not properly initialize (0xc0150004).» Click OK to close the application. »

  HP CUE status root has stopped working reads 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I've uninstalled and reinstalled the software, but the error still occurs.  Seems to have happened after an update of Windows Vista (this machine is rarely connected to the Net).

  Any ideas to fix it please?

  Click Start
  In the search window, type services.msc
  Click on the above result that says services (you may need to right click and choose Run as administrator to open)
  Look for the HP Cue (or similar)
  Make sure it is started and in auto mode (automatic not delayed or manual)

  If it is not automatic, set it to that, and then restart the computer.

  If this does not work

  Click Start
  Type msconfig in the search window
  Click on the above result
  Go to the Startup tab
  Uncheck hpqtray08 and hpqst08.exe if it is in the list
  Click on apply, then OK and perform a restart

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.

• Host process for windows has stopped working

  Today, I got an error with no activity on the computer. "host process for windows services stopped working. Immediately after this message when I clicked on the Panel of the window was empty. Also, my printer stopped working. I checked the day windows journal and noticed that the last 3 weeks of auto updates had failed for some reason any. I have tried almost everything on the site of MIcrosoft to fix this problem without success. I even tried to do manual downloads of Vista SP2 but this faills and.

  Any advice?

  Hello

  Try to install an update of:
  http://support.Microsoft.com/default.aspx/kb/940520

  then run Windows update.

  I hope that helps!

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• "HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS

  "HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.

  WHAT THEN THIS WINDOW WILL STOP APPEARING?

  Hi yogesh,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you get a boot error message.

  This problem may occur if there are incorrect settings in Task Scheduler.

  Perform the steps mentioned below and see if it helps.

  a: Start Task Scheduler type in the search box and click on enter.

  b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.

  c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).

  d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.

  Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.