Printer Status window Interface has stopped__

Similar Questions

• Printing status window Interface has stopped working

  I have a new computer with Windows 8 and an old printer Dell720.  I found a driver and the printer works with the new computer.  The printer was working without any problems, when I received the message "the Print status window Interface has stopped working".  I also had a "Low Ink" pop-up window.

  Any help to solve this problem would be appreciated.

  OK, I found a way to deal with my problem.  Apparently the problem centered around the printer sends a message to the computer that the ink cartridge is low on ink.  I said to the computer I installed a new print cartridge (but I do not actually have) and now the printer works.

• Printing status windows interface has stopped working

  Original title: what to do when I try to print a statement and get a message {windows printer interface status stopped working]
  The document is through Adobe reader

  Hello

  1. what operating system you are using on the computer?
  2. What is the brand and model of the computer?
  3. not the problem only occurs when you try to print the document using adobe reader software?

  
  Method 1:
  You can try the procedure described in the link and check if it helps:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2:
  You can also see the following article from Adobe to solve the problems on the issue.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Alternatively, you can contact adobe about this issue.
  http://forums.Adobe.com/community/adobe_reader_forums

• The printing status window interface stopped working

  After loading MS SP 2 for Vista, my laptop has stopped working due to a registry error (my best guess). With the help of a the manufacturer Gateway, laptop computer recovery disk works.  Reinstalled the desktop drivers and Dell AIO printer 960 & utilities, but cannot print because of "the printing status window interface has stopped working".  How can I fix it?

  Hi Tammy,

  I suggest you try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green checkmark beside your printer (Dell A960 printer). This check box indicates which product is the default printer for Windows.

  Also, make sure that the printer is not paused or offline.

  1. on the bar menu print queue, click on the printerand then locate suspend printing and printer use offline items in the menu.

  2. ensure that there is no check box next to each item. If a check mark appears next to each item, click to clear it.

  Change-your-printer default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  If the problem persists,

  Step 3: Download and install the latest drivers for printer from DELL website, click here for drivers

   

  For more information, see the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  You can check with DELL to known problems

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

   

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer status window interface stopped working

  I'm unable to print information from my pc because I get a message saying, "the printer status window interface stopped working.  -What it means and how to fix it?

  Hi Doris,

  1. What is the brand and model of your printer?

  2. remember you make recent changes made to the computer that could have caused this problem?

  3. how you have connected the printer to the computer?

  Try to run the printer Troubleshooter.

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stopped Printer Status window Interface - work

  Print 3 times then I get this message. I have restart computer, ptint 3 times and repeat the process. I have a Lexmark 8350 AIO. I uninstalled, run the tool cleanp Lexmark and re-installed new drivers from Lexmark. I thought that it is strictly a matter of Vista. How should I do?

  Hello
   
  Microsoft has an automatic convenience store to find and correct the mistakes of the printer. To download and run the automatic troubleshooting utility, visit the following link and click on the "Run now" button and follow the instructions in the wizard to run the tool.
  
  Printing problems and printing errors: http://support.microsoft.com/gp/printing_problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• The job status window interface stopped working Dell AIO printer 968

  I bought a new computer with window 8, native. "Each connection with my previous devices ran quite well when it is installed automatically, except for AIO printer 968 Dell, I have installed a new driver from Dell, more precisely prescriptions Scanner is pritnting OK when I get this message" Job status etc.. "I have to accept twice this window to find a solution otherwise everything is blocked, then it starts to print, but it only prints what is like html text and not clear. How can I get normal printing without this message "State of work etc." and with all the text

  Rick

  What you are proposing, it's just what Dell US suggests on its website.

  I tried and it doesn't work.

  I tried once more and still the same message: employment status etc.

  Hope that dell wil solve his problem before buying one new another brand

  THA, ks, greetings and a happy new year

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Dell A920 printer interface has stopped working. Why

  The message that I get when I try to print is the status window the printer does not work. What happened very suddenly

  tweethrt45,

  You can copy a document under the glass? Black and white and color?

  What program anti-virus and firewall are you using?

  Run the system information tool to find and post the information here.

  Rick

• Windows Movie Maker error importation 'may not be imported. "An interface has too many methods to fire from.

  I'm doing a movie using Windows Movie Maker and hobby clips that I converted to VHS using Roxio Easy VHS tapes to DVD converter.  When I try to import the file into the Movie Maker, I get a message saying 'could not be imported. "An interface has too many methods to fire from.  What should I do?

  This happens usually when your source files are
  not compatible with Movie Maker. Best bet would be
  be to convert video files to WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup290.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows Movie Maker error - interface has too many methods to fire events from

  I get this error when I try to import video into Windows Movie Maker.

  "D:\profile.cu\Desktop\Live\10_1_11 Outside\july 032. AVI could not be imported. "An interface has too many methods to fire events from.

  What it means?

  Hi Joe Frick,

  1. You receive a similar error message when you import .avi files in Windows movie maker?
  2. Are you able to import other types of files in Windows movie maker?
  3. Did you the latest changes on the computer?
  4. Where you import video into Windows movie maker?

  I suggest that you try to import other files in Windows movie maker avi video and also check if you import another file format in Windows movie maker.

   

  Formats supported by Windows Movie Maker in Windows XP file

  http://support.Microsoft.com/kb/308464

• Windows Explorer has stopped working - error status Code - c000009c

  Original title: Windows Explorer has stopped working - debilitating Error Message

  On my main account, I keep getting an error message that pops up every 4 to 8 seconds and freeze the rest of the screen. It comes from Microsoft Windows and the error message indicates that Windows Explorer has stopped working the details include:

  Signature of the problem

  Problem event name - InPageError

  Error Status Code - c000009c

  Media Type-00000003 vulnerabilities

  OS version - 6.0.60012.1.0.256.6

  ID of locale - 1033

  Additional information 1-40 d 4

  Information additional 2-4062ad41ec8067256aa4c5e2b56d3c79

  I can't access the internet and my computer through my secondary account - I of course tried closing down and restart a dozen times, I have ensured that all the Windows updates are installed and I am at a loss for what I could do. Any help would be so appreciated, because I'm working on my computer and couldn't since a few days - get desperate!

  Thank you very much!

  Thank you

  Hi Jessicaco,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Explorer-crash-bug-Explorer-has-stopped/06f4ac0c-E486-491e-8861-30903b8791b1

  I hope this helps!

• MSASCui.exe failed 0 x 80000003 & Windows defender User Interface has stopped working

  I can't update windows and spybot will not run. AVG says no active components. When I restarted I got this MSASCui.exe message the application failed if initialize properly (0 x 80000003) click ok to complete the application. Then I got the message that Windows Defender user interface has stopped working. Also earlier while trying to ask this question box in my speakers one ad for Charmin and part of a kind of talk show or something.  It also happened just before I open IE to ask this question. PLEASE ADVISE!

  I thought that this update last night, but I guess no, here is what microsoft online malware remover found

  Exploit Java/CVE-2008-53
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/appletx. Class

  Trojan:Java / Selace.A
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/loaderx. Class

  Trojan:Java / Selace.B
  c:\users\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  c:\documentsandsettings\diana\appdata\locallow\sun\java\deployment\cache\6.0\3\12a49b83-322e820c
  MYF/y/payloadx. Class

  Earlier, I heard another ad for the outdoor channel. Help, please!

  I have Vista I know makes a difference in what I do.

  It looks like something very funky happening with your Internet Explorer program.  It looks much like malware to me, but if you ran several scans with different products, then that may not be the case.  You can try several above - but you probably won't find anything (but you might--sometimes a virus is very sneaky and that one or two anti-malware programs are able to deal with them).

  Since it seems to be a problem with Internet Explorer, I suggest that repost you your question (with a link to this topic so that they will know what's already been tried) to the Forum of Internet Explorer http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in issues of IE will be happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• After Windows Update has failed I can print is no longer.

  original title: no printing

  I have a dell xps8100 windows 7 home premiun after a windows update has failed my printer stopped I tried a system restore, but he failed and he said try again

  my printer does not recognize my computer even for a test

  cgb321

  Try reinstalling the drivers for your printer. I had times when an update has done something that required that I have reinstall the drivers for a product. Don't know why, though. It's not really 'supposed', but he did.