Printer Toolbox

Similar Questions

• Ink levels is not available and printer Toolbox does not

  My Hp Solution Center, he says that ink levels is not available, as the printer Toolbox does not. Had to uninstall and reinstall the hp Solution Center because he had a malware. My printer is HP Photosmart C5200 all-in-One series and OS is Windows 7 64 bit.

  Hello

  Please follow the steps mentioned in the document below.

  http://support.HP.com/us-en/document/c01868684

• Missing D110A Printer Toolbox & ink levels

  My D110a on Win8.1 does not open settings ==> PRINTER box tool. It will not display on PC ink levels, either. Printer and scanner work - most of the time.

  Updates are ongoing.

  HP website doesn't help - as usual.

  Does anyone have a solution?

  Hello mellowmarshman,

  Welcome to the Forums of HP Support!

  I see you are trying to access the Toolbox of the printer for the D110a on Windows 8.1. You need to maybe uninstall and install the printer software.

  If this isn't something you have tried, here are a few guides.

  Uninstalling the printer software

  HP Photosmart full feature software and drivers

  You can also try using the HP and Dr. Scan impression, if you run this reply back with the results.

  See you soon,.

• Canon Laserbase MF 3220 scanner/printer Toolbox

  I have a Canon Laserbase MF 3220 printer/scanner but have lost the installation CD. I downloaded the printer drivers so I can print but not the Toolbox full, so I can scan. My old computer has the Toolbox and it still works, but I would like to install the Toolbox on my new computer

  Hello

   
   
  Check the Canon Website and download the good Toolbox for your printer/scanner.
  http://software.Canon-Europe.com/products/0010359.asp
   
   
  I also suggest you to contact Canon support for support on this issue.
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer
   
  http://USA.Canon.com/Cusa/Windows_7?page_left_nav=division_1

• Cannot print in black C6180

  My C6180 printer all-in-one just stopped printing in black. I changed the cartridge of the printer 3 times and it made no difference? It prints in color but not black. I cleaned the cartridges and that did not help. I noticed on some other forums that other people have the same problem without finding a resolution.  Anyone got any suggestions?

  Well, I might have some hope. Actually, we have found a solution to this problem and our printer now works as usual. I'll try to explain what we were doing, so I hope it helps someone else. I must say that I was chatting online with a HP technician at least an hour and it never recommended this solution, and we found it on their help page. Maybe he did know about this!

  First, you will need to access the Toolbox of printer on your computer. Go to start-programs-HP-HP Solution Center.

  Select settings

  In the drop-down list, select the printer settings

  Select printer Toolbox

  In respect of peripheral Services, select the option for clean print heads

  It's a clean deeper than what is being done to the printer itself. We ran this about 5 times, and at the end of this it was printing black again. It was a few months ago and we have not had a problem since.

  I hope it helps someone else. HP did not of course help us!

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• I am able to scan, but unfortunately not able to print on the printer DJ1515.

  Original title: Do not print to the printer.

  My DJ1515 printer after the success of the download, I was able to scan, but unfortunately not able to print. Need help how to solve this problem. Thank you

  You need to provide a little more information... and it is unclear what you mean by "after successful download" even though I think you mean that you believe that you have successfully installed the printer.

  Is your printer: http://h10025.www1.hp.com/ewfrf/wc/product?cc=lamerica_nsc_carib&dlc=en&lang=en&lc=en&product=5385208 (this model seems to be sold in Latin America and the Caribbean)?

  What version of Windows (XP Home, XP Pro, etc.) and service pack (none, 1, 2, 3) do you have?  Do right click my computer and select properties for info.

  Your printer is connected to your computer by USB, correct?

  When you installed the printer did you leave the printer NOT connected until you are prompted to connect by the installation software or did you first connect the printer to the computer and then install the software?

  What happens when you try to print? If you get an error message, please provide the full text without paraphrase.

  Please describe the status of the lights on the front of the printer (on/off/flashing).  Lights are on 1, 5 and 6 in the figure below:
  

  Click Start > printers and faxes
  Is there an icon for your printer?  If Yes, it looks like the following (except with the name of your printer instead of "hp Laser Jet 1300 PCL" 5th)?

  
  It's

  • Is there a circle with a check mark?
  • Is there a 0 in the second row?
  • The third line says 'ready '?

  What happens if you right cliquer click on this icon, select properties and then click on the button "Print Test Page"?

  What happens when you follow these steps:

  • Click Start > all programs > HP > HP Deskjet 1510 Series > Series HP Deskjet 1510 (note that the wording in your Start Menu may show instead of 1510-1515)
  • When the printer software opens, click on 'Print and scan' and then click on "maintain your printer.
  • When the printer Toolbox opens, click on 'Print the diagnostic information' in the tab 'device reports.

• Photosmart B110c 'Now print alignment page' appears to never.

  Issues related to the:

  How to exit display forever now 'print alignment page?

  How to solve the problem of failure Scanner?

  1. I changed the print head,

  2. I replaced the black ink with authentic cartridge, the yellow ink with compatible cartridge.

  3. After power off, Power ON, appears on the printer: failure of the Scanner, then alignment recommendation and finally 'now print alignment page' and appears to never.

  4. the Solution Center on the computer displays the image below.

  

  5. from printer Toolbox (in the settings): I could not align the print head, because the failure of scan.

  6. After you clean the print heads and print a Diagnostic Page, I printed the following attachments despite the printer on the SCREEN continues to display the text "now print alignment page":

  

  

  

  7. in spite of the yellow ink level is OK, the yellow is not printed on the page_2 attachment hardware of the printer.

  

  Please advise to fix the unit.

  Hello

  HP has no guarantee that 3rd party supplies will work in our printers. Looking at the Diagnostics pages it seems that you are not printing cyan or yellow. There are steps you can take to try to retrieve not being able to print individual colors. Please see this link:

  http://support.HP.com/us-en/document/c02045945

  If you cannot print all colors, you run into a problem to scan the alignment page. I think that the question of printing color must be cleared before attempting to align again. How to perform an alignment, please visit this link: http://support.hp.com/us-en/document/c02045945

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• HP Toolbox

  Where can I re - install the shortcut of office/utility from hp for the laserjet pro cp1525nw printer printer Toolbox. I had to do a reinstall of the backup due to a problem disc and does not install the shortcut for the Office for the Toolbox.

  Hi RedWolf72,

  You want to download and install the full feature software and driver from the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86470-3&cc=US&DLC=en&LC=en&os=4063&Product=4052980&sw_lang=

• Print cartridge missing or not detected

  I have a HP Photosmart C4280 running on Windows XP.  Whenever I try to print, I get the message "Missing cartridge printing or undetected"... it seems to be the cartridge three colors, the origin of the problem.  I have taken the cartridges out and then put them, I turned off the printer and then turned back on... the only thing that seems to work is to go into my HP Solution Center, select my printer, select settings, select printer Toolbox, select Services of devices and finally click on print a Diagnostic Page.  Will then and only then the printer print my document - then it prints a page of diagnosis.  I do whenever I want to print something... any suggestions?  I'm wasting ink and paper...

  Hello Loggin

  You use genuine HP cartridges? The article below covers the cartridge for the Photosmart C4280 problems. You recently moved to another country? Sometimes new regions have different cartridges.

  "Incompatible cartridge" or "print cartridge is missing, improperly installed, or not intended for your device.

  Have you tried a new HP ink cartridge yet? In this way, you can locate the problem.

• DeskJet 1050 J410: HP Deskjet 1050 J410 intermittent printing problem

  My printer has an intermittent problem where when something is being printed, a line will have the empty right in the middle of it (you can see part of the printed information line above and below the Virgin part).   About ninety percent of the lines print correctly.   Even if the cartridge still had ink, I replaced them - this has not fixed the problem, so I thought that the printer was bad.

  This is where it gets strange:

  Some time ago I bought an another Deskjet 1050 J410 (it was on sale and I wanted a backup).  I replaced the active printer with the new printer, thinking the problem would probably solve themselves.   Guess what?  It does the same thing as the old printer.   It doesn't seem to matter what I print (emails, documents,...).

  Thinking that it must be something in the processor (motherboard, printer card?), I turned off the system and left on the printer, then copied a page on the printer as a test.    It is also the same problem.  So now that I'm back to thinking, it is a printer problem.   But how the new printer could have the same problem as the old printer?

  Any ideas what is causing this and how to fix it?

  I ran the diagnostics HP (HP Print and Scan Doctor) and no problems were found.

  I also ran the HP (alignment, cleaning cartridges and printer) Toolbox.

  Is there a software that is loaded directly on the printer and could that be the cause of the problem?

  P.S. before I met this problem about 1 week ago, I had used the printer for more than 2 years and not had this problem.

  Jamieson, of the Forum of Support HP team sent me an email with a link that has several steps to correct the problem, I did.   I am very pleased to report that my problem has been corrected.    Jamieson, Bravo.  You have made my day. Keep up the good work.     I'm curious to know what caused this problem to occur.

• Printer HP Deskjet F4580 ink failed to register, impossible to find the solution in troubleshooting

  1 hp Deskjet F4580

  2. Windows 7 64 bit

  3 ' e' on the screen, (new) black ink won't register and service orange flashes

  4. no change known

  You can try the following steps:

  Click the Windows icon.
  Click on all programs.
  Click HP.
  Click on HP Solution Center.

  HP Solution Center will open in a new window.
  Click on settings ().
  In the print settings box, click Printer Toolbox. The printer Toolbox opens.
  On the device Services tab, click on clean up the (from print cartridges).
  Click on clean up to start the process.

• Two printers HP Photosmart D7360 print suddenly all green!

  I have a HP Photosmart D7360. My husband has one too. We bought at the same time over 2.5 years. Mine worked fine until yesterday, when he began to print everything with a green tint. I did all the HP site and forums suggest, clean the print head, installed all new HP Vivera cartridges, and I use HP paper too (always did that). Always green printing. To exclude a hardware problem, I removed the printer from my computer, uninstalled all the software, etc., then hung and installed the printer from my husband. Hers is too green print on my computer. Two printers print perfectly on his computer. Obviously, the problem isn't with the printers but with a setting or something like on my computer. I tried everything, different applications of printing, different settings, no solution. The only thing I did is "calibrate the color" - because I don't have this option! I click on the HP, then the printer Toolbox Solution Center, but it gives me only four options: to clean the print head, in order to align the printer, to print a diagnostic page, and print a test page. NO 'calibrate color"everywhere there... Please, help me, I'm at my wits end with! Thank you!

  UPDATE:

  I think that this problem is caused by a defective paper. I bought a new pack, the first two pages came out very well, so - same story once again, all green. There is no problem when I print other documents (plain of HP, HP Everyday, Kodak Ultra Premium and Epson photo paper).

  I'm really upset about it. I know defective paper has guaranteed and can be replaced. but who will replace the ink of this time and constly? Where is the quality control?

• My HP C6150 all-in-One will not print. The printer icon appears, but it shows 0 pending work.

  I have just upgraded to Windows 7.  I installed the HP update software/driver for my HP C6150 all-in-One.  I can scan, but I cannot print.  I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page.  I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox.  When I try to print from anywhere else the printer icon appears, but it shows 0 pending work.  Nothing happens, and the icon of the printer ends by goes.  I've uninstalled and reinstalled the software/driver with no luck.  I can't find a patch and update HP says there is no new update.  All diagnostic tests, I'm saying that everything works correctly.  Please help me.

  I was able to remove the printer drivers by using a printer driver removal utility.  The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory.  I reinstalled the software/driver and everything is good.  Thank you!