Printers and cartridges HP 301

Similar Questions

• printers and cartridges

  I have a HP Officejet 6700.   I kept getting a message saying the need black ink cartridge to replace.  I bought a new cartridge and successor and I keep trying to pring, get the same message that my cartridge is empty and replacement needs.  It's a new ink cartridge.  I have to do to get it to work properly.  Please notify.

  Karendenise2013 wrote:

  I have a HP Officejet 6700.   I kept getting a message saying the need black ink cartridge to replace.  I bought a new cartridge and successor and I keep trying to pring, get the same message that my cartridge is empty and replacement needs.  It's a new ink cartridge.  I have to do to get it to work properly.  Please notify.

  See the link below...

  Troubleshooting cartridge error messages (failure ink cartridge, cartridge problem, replace following cartridge not compatible cartridge etc.)

  http://support.HP.com/us-en/document/c03071872

• HP Envy 110 Series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them

  I have a HP Envy 110 series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them and are not clear. Much of the document is blurry and cut through. Any suggestions?

  Read this article, he describes some steps on how to use the printer utility that came with the printer to run a few steps that might improve the print quality, including cleaning the print cartridge and other procedures.

• my printer cannot print black ink and cartridges are all brand new

  my printer doesn't print black ink and cartridges are all new... any suggestions how to solve this problem?

  See the solution in this post.  Be sure to check the vents, as described in a link in this post.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP printer D110a not on display upward on printers and Fax (Mac)

  Hello!
  
  It is the question of my friend.  Using iMac
  
  We have both the HP D110a wireless printer. I was able to implement the mine without any problems, but my friend is not able to get the printer appears under print & fax.
  
  When I set up my printer she stood and used Hello. My friend can't get Hello appears. I have older iMac (2006) and it has new iMac (2010)

  It is using snow Lep. 10.6.5

  Someone, please help?
  
  Thank you
  Jamie

  First of all, let's reset the printing system:
  
  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Fill out and return to zero problems with Deskjet 3052 has printer and cartridge 61xl black

  Yesterday, my new 61xl OEM black cartridge ran out of ink. I had it only for a few weeks, but this cartridge made of course go fast (faster than the startup cartridges, I swear!). This is a printer at home that is used only by me for personal use.  I wonder how much ink was in it when I bought it. Of course, they don't disclose the ml on the packaging more... how convenient for them, huh?

  In any case, I decided to fill up again. It was my first attempt for this printer and a total failure. I did some research. I used 2 other cartridges to fool the technology of memory without result. Online instructions for which parts of contact on the Strip are either nonexistent for this cartridge or are as clear as mud so I couldn't try it again... This is where it would have been a picture is worth a thousand words.

  It would be a very good alignment page printing. So I think it was successful. But when I tried to print or copy something, it would print the upper part and act like it ran out of ink down. The same thing with trying to clean the print heads. He will start the black stripe and stop about two thirds of the way through. There was less black to have with each successive cleaning, I've tried. If I started on the first cleaning would have the same generous amount of black ink, but decrease as before. I was losing the ink in my brand new color cartridge so I stop messing with it.

  I received errors to gogo (not OEM! False! The sky is falling!). The ink is obviously coming out of the cartridge, so it's not the problem. All I know is that I have a good full of the same black refill ink oem cartridge that I use in HP cartridges for years.

  I don't really like what is happening to this piece of crap cheapo printer so I am not interested to hear how HP has my best interests at heart. What about someone gullible. If I mess up with cheapo ink, then what? And counterfeiting BS is a bogus excuse too.

  Yesterday I had to go out and buy a new cartridge. So today, I found a printer as I used to have (1315) for $20 on Craig's list. Heck, I have tons of cartridges 56, 57 and 58 for this baby and you can charge for this printer throughout the day. I not picking that up next week but then if someone knows how to bypass attempts to be GREEN with this printer and cartridges, of course I understand the help. Maybe who contacts on tape cartridge? Or the head of which HP exec throw this printer to? I'm open to suggestions. Otherwise, the next cartridge runs out in this waste of time and money, it just goes straight to a landfill where it belongs so it won't be wasting someone else's time or money. Thank you!

  It seems that you have introduced an air bubble in the cartridge drain pipe, resulting in starvation of ink you print.

  Pageyield of HP's site lists the 61xl 8.5 ml cartridge.

• ALL the icons have disappeared in the printers and Faxes folder

  A network all Windows XP Pro with a server and 5 workstations were ALL icons in the printers and faxes on ALL machines records disappear.  Add a printer does not work, however, they can still print. for local printers and network.  GO FIGURE.  All the computers are on the SP3.

  Tried everything short of reinstalling XP on the server... running anti-virus and anti-malware scans, registry fixers running, restart the print spooler, all XP updates, etc.

  Unless someone comes up with something else that I have not tried before reinstalling XP on the server from scratch, this is my next step.

  Thank you
  Don
  E-mail address is removed from the privacy *.

  He is missing, damaged or the wrong version or other files which depends on the printui.dll is missing or damaged, or incompatible.  You can do a sfc/scannow, it should correct the problem if it's one of the files, click here to learn more about the System File Checker: http://support.microsoft.com/kb/310747

  If sfc/scannow does not solve things not try this:

  Is the file in the System32 folder, but Windows File Protection may not allow to replace, try this:

  1 - a copy of printui.dll should be found in the \WINDOWS\ServicePackFiles\i386 folder.

  2. rename the one in \WINDOWS\system32\dllcache printui.dll.old and then copy the folder \WINDOWS\ServicePackFiles\i386 for the dllcache folder.

  3 remove the printui.dll file in the \WINDOWS\system32, PAM will be replaced by the one that you have most recently in the dllcache folder.

  John

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• printers and faxes does not display when you browse another PC on my network

  When I navigate to another PC on my domain using------(ComputerName)-I usually see tasks scheduled as well as printers and fax machines.

  This is really useful when installation of printers and updating drivers remotely.

  I'm running XP 32.  I recently deployed a few new PC with XP pro 64-bit.

  When you browse my PC on the 64 bits of the PC I see more printers and fax machines.

  File sharing and printer is on.

  There are 2 PC 64 bit I CAN'T veiw the printers and fax machines on.  I checked eveywhere I can think and compared the two 64-bit pc (I can see the printers on one, and on that I do not see printers) and everything I find is the same.

  I've read that it could be due to the fact that Quebec of printer on the new 64-bit PC was not yet open, and once it is open it should appear when browsing from another PC.  I tried this and the printers and faxes are still not visible.

  Printer queue is launched and running without problem.  I also tried this restart.

  Connectivity is good.

  I have no problem either browse PC (32-bit and 64-bit) to other locations on my network.

  I also tried navigating from 64 bit to 64 bit, and the results are the same that when I travel from any other PC.  Some PC the list of printers and fax machines as well as scheduled tasks, some righteous display scheduled tasks.

  Any help is greatly appreciated!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Networking forum.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• No response to the printers and faxes control or Word/Excel print command

  No response to PRINT in Word or Excel or any other command print.  No response to access Control Panel Printers and faxes.

  A fix for this problem?  Everything else works on Windows XP

  If the printer driver is damaged, you must remove the old one first, either in step 4, described in an Article, or by using the procedures described in the article by Bruce Sanderson.

  If you do not delete the old driver, Windows will use it even if you download and think that you install a new.

• My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

  My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

  Printer in Windows problems
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

  J W Stuart: http://www.pagestart.com