printers HP officejet 4500 g510gm

Similar Questions

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• OfficeJet 4500 G510-gm: DISTORTED IMPRESSION

  I have an Officejet 4500 G510gm.  After an abortive attempt to printing on glossy photo paper and my pages printed on normal paper now out asymmetrical. I went through the process of "Align cartridge" several times without success.  Is this fixable or fact on average a new printer?

  You mention a failed attempt of photo printing.  Do you have the photo paper jam?  If so, it is likely that the ink was placed on rollers.  This would cause difficulties in feeding paper. In the paper here troubleshooting steps can help solve asymmetric printing.  Clean the rollers as shown in step four.

• Problem drivers 5.0 HP printers Officejet 4500 G510n-z

  Hello

  updated drivers HP 5.0 from August 30. 2016

  Since then attempt to use the results of scan in "waiting for scanner ' for the ages or error of-9923. (This Officejet 4500 is a wifi printer)

  Generally, I use an extract and import from a scanner in the menu file, in which the printer is visible.

  Removal and reinstallation of the HP printer has not solved the problem.

  Did you notice similar behavior?

  Greetings to all.

  Same here :-( I had to buy a cable USB A to B USB to connect the printer/scanner directly on the Macbook, at least that, it works... always looking for a way to bring my analysis via WLAN...

• Windows 10 for Officejet 4500 driver

  Hello

  I've updated from windows 8.1 windows 10 and after my windows activation, even once, I did a clean install of my windows.

  After a successful installation and activation of windows, tried to install the printer driver using the driver windows 8.1.

  Installation began, but after the detection of the printer, it hangs at 'check' HP scan interface 2 to 92% and stays there... I tried your solution given in your website and forums as the restart and everything, but nothing works. I have my printer connected via an Ethernet cable with my router.

  We need drivers for windows 10 for HP officejet 4500 G510 series printers. Impossible to find on the pilot and Web site download page.

  I don't understand, how a Prime Minister like HP business fail to update their drivers with a new version of windows? It's just not cool.

  Thank you and best regards,

  Dr. serge pacome

  HP released drivers Windows 10 Compatible for HP Officejet 4500. Thank you so much HP.

  Here is the link-

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series-G510/3919445/model/3986392#Z7_3054ICK0K8UDA0AQC11TA930C7

• Printing problems HP Officejet 4500 and warranty issues

  Help!

  I have problems with a HP Officejet 4500 that I bought last January.  He stopped working at the end of December, but I had to get out of town for Christmas and have not reported in time.  It is not my main printer, so I didn't start working to try to make it work until today.

  It will start printing, but stops after a few lines, the screen indicates that it is out of ink.  Sometimes he says that the black ink is low, sometimes the tri-color, sometimes both.  After I have the OK button it will print another line or two until it stops and says it's out of ink.  What it prints, it's kind of uneven and blotchy.  Sometimes it falls a letter of a Word.

  When I run a report it wybody help best cut down the lines.  For example, if the line is different sizes of the 'Aa' letter, it will only print the top of the letter.  He will also skip lines.

  I cleaned the cartridges, I aligned the cartridges (that I did when I put these new cartridges), and I'm at the end of my mind!

  Can someone help me or am I just bad luck?

  Thank you!

  I would like to look at this document here. It will give one the troubleshooting steps to try to resolve the problem you are having with a quality of printer output. Among the measures here are ones you mentioned by train, but there are others in the document which are available and which were not included in the above post. If you reach the end of the document, and the question is still involved, would seek the replacement of the product.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• to send a Fax from PC in HP Officejet 4500 All - in - One G510

  Today I purchased the above unit and connected via eithernet, but I'm not able to send the fax from PC as the printer/Fax icon does not appear in the PC.

  I have to send many faxes and I bought this machine after reviewing the data sheet that clearly mentions "PC FAX SEND ONLY.

  means I can send faxes from my PC directly without printing the page and implementation Pan Telec.

  I ask team HP to help me configure the printer

  Concerning

  MYM

  {Information}

  Hi sainmym,

  First make sure you have the driver of Fax installed in devices and printers and then when you go to send a fax from the printing application make sure you designate fax HP Officejet 4500 G510 driver. When you tap on print you get the fax to the step 3 dialog box.

  

• HP OfficeJet 4500 G510g - missing the USB cord

  We had for Christmas the HP OfficeJet 4500 G520g.  He tells me to connect the all-in-one to the computer with the included USB cable.  I looked through everything that came out of the box and there was no USB cord.  I can't use the modem cable to connect.  I need a USB cord.  What can we do about it?  I don't want to have to go buy something separately that was supposed to be included.

  Hello

  Please check a small booklet (or a piece of paper) in the box. This brochure should show what is in the box, and believe it or not, many printers now have no USB cable in their boxes, one of the reasons: reduce costs, a normal USB cable can now cost about $10-$15 which contributes to 10% to 15% of the price.

  Kind regards.

  Update: the Guide:

  What is in the box of

  All-in-One, cartridges (1 black, 1 tricolor), 15 power adapter, two power cords, cable USB (PA only), (PA only) Ethernet cable, phone cord, CD with printer software and user's guide fax guide and poster set-up.

  Where do you live? Only AP (Asia Pacific) region's cables in the box.

• HP OfficeJet 4500 G510-m: set a wireless adapter in the port of my HP OfficeJet 4500 G510-M Ethernet

  Hello, a recent update of fiber in my house left me without an Ethernet cable to my HP OfficeJet 4500 G510-M.

  Can I connect a wireless adapter to the ethernet port on the printer?  I could use the USB connection, attach it to a computer and share the printer to the network.  I thought to fix a wireless to the printer adapter would give me the most flexibility.

  Thoughts?

  Thank you

  Dan

  Hello @tarfy58,

  Welcome to the forums of HP.

  I understand that you are looking for alternative methods to put your Officejet 4500 G510-M on your network.

  I would like to help.

  Unfortunately the printers firmware would not know what to do with the wireless adapter.

  You would need something like HP 1200w NFC/Wireless Mobile Print accessory.

  The only downside is that I saw the Officejet 4500 on the list of supported printers.

  Please check the specs of the device, in case I missed it.

  Your method the most effective would be to use the USB connection, attach it to a computer,

  and share the printer to the network.

• OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

  Hello

  Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

  I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

  Thank you

  Al

  Hello @adb1779,

  Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

  Step 1: Launch MSCONFIG:

  I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

  1. Click on the Start menu
  2. Click run. In the Run dialog box, type msconfig and click OK
  3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

  Step 2: Uninstall the drivers:

  I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

  1. Click on the Start menu
  2. Click on programs
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall
  6. Please follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 3: Clear the server properties:

  Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

  1. click on the Start menu

  2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

  3. in printers and faxes click on file and select Server properties

  4. in the print server properties window, select the drivers tab

  5. If your HP Officejet is listed, click on it and select Remove downstairs.

  6. a new window opens, click on Remove only the driver. Click OK.

  

  7. Select apply and then OK in the print server properties window.

  8. close printers and fax machines.

  Step 4: Delete the temporary files:

  1. Click on the start menu
  2. Select run. In the Run dialog box, type %temp% , and then click OK
  3. Click on the Start menu
  4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 5: Reinstall the drivers:

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
  4. Once your printer is properly reinstalled please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OfficeJet 4500 G510a

  I downloaded the last software package on the site of HP for Windows 8 for the OfficeJet 4500. I ran the software and I can print successfully. However, the solution Center says that the installation was not complete. When I try to add a device, I am invited to connect the printer to the computer via a USB cable. I'm doing this, but the following button is never enabled. At this stage, I can only put an end to the installation via the Task Manager.

  Any ideas?

  Thank you

  By comparing the printer that you said that you have, the G510a does, it allows to print wireless, the software could not find the printer, I think I found the problem.

  The G510a isn't a printer wireless, or Ethernet, it is only USB. The software that you use is correct if you install the G510a, but it will not be installed with the other printers of the series.

  I would like to you, uninstall the installed printer software for the G510a. Once that is done, install using the Printer Wizard.

  Printer Installation Wizard will locate your Officejet via its network connection, go online and download the correct software.

  I hope this works.

• How to connect my HP Officejet 4500 G510n-z to work wireless.

  I recently bought the HP Officejet 4500 G510n-z, I connected it to my netgear router I can see that it is through netgear genius, but my computer does not connect. I tried disabling my firewall, I uninstalled and reinstalled several times. still no luck but when I run the test through the printer wireless, she spends on everything. I tried to find a way around for 427 udp but I couldn't know.

  Connected through wpa - psk

  Windows 7

  Acer laptop

  Please help me, I have school from 5 days.

  Thank you

  Oh, that's a good clue.  This instance of the printer is looking for a USB connection!  Go to control panel > printers & devices and delete the printer in the printer list.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP Officejet 4500 installs wireless on the laptop Windows 7 computers 2, but not on the 3rd

  Help a friend to a printer with the HP all-in-one Officejet 4500 problem.  Although it has been installed on the laptop of the wife of my friend, he would never print.  When pointing the mouse on the icon of the printer the printer and the devices page, this would indicate that the printer is offline.   It was not the case.

  I used the disk supplied with the printer to install wireless on their other two laptops of W7 and installed with a wired connection on their tour of W7.  The printer properly on all PC functions.

  I used the uninstall level 4 OJJ5700 washer 8 HP utility to remove any trace of the product of his laptop and then again used the disk to install the printer.   As with the other 2 laptops, I selected a wireless connection, but unlike the other 2 it finally gives me a msg that the printer is not found on the network.  Then it prompts me to temporarily connect the laptop to the printer with the USB cable, saying that once it finishes the installation of the software, that we can then make it wireless.  It never ends install even with the cord.  I went through this process twice, and both times it sitting there on the stage of configuration for an hour more before I killed the task.

  The printer is sorta installed on the laptop, because it allows to print with the cable, although the name of the printer has a. TMP extension in the devices & Printers.

  All laptops are connected to the same network.

  Anyone who has never met this before and come up to the top with a solution?  The laptop seems to work otherwise beautifully, although I suppose it wouldn't hurt to run a full scan of Malwarebytes.  I never really knew the problem, it's viral, but I just ran out of time today before that I could make sure...

  Hi boweasel,

  Please confirm the steps for me. At this point, you did all the steps of troubleshooting of the printer, which should solve the problem. At this point the printer works with two other computers, it seems it's something with the operating system on this computer. I suggest contacting the manufacturer of the laptop on a recovery or disturbances to the OS.

  Please let me know if you are able to install and impression after working on the operating system.

  Thank you

• HP Officejet 4500 g510-m, it scans, but it does not print

  Hello

  I have a HP Officejet 4500 g510-m, which seems to work fine. When I connect it to my laptop, which is a Sony VAIO with windows 7 64 bit, using a usb cable it scans normally but it does not print. There is no error push up, even in the print queue's list as his impression, just not as a document waiting or anything. I've uninstalled and reinstalled the drivers, but nothing happened.  I used printing HP and doctor Scan of your site and it print an internal test page, but not one sent from the computer, so he said that this is not a hardware problem, but something is wrong with the software. On other computers, it works fine. Could you help me?

  Thank you

  Lena

  Hi Lena,.

  Please try to use an alternative driver steps and let me know if this helps,

  It should then allow any functionality such as printing, scanning and fax.

  Open Control Panel, and then select devices and printers.

  Right-click on the icon HP Officejet 4500 (be sure not to select the icon of the series Fax 4500), and then select printer properties.

  If there is no such icon 4500, that it can be combined under any other icon, right-click on the computer icon and look then to the properties of the printer, if not do a right-click any listed printer and check if the icon of 4500 sub list the properties of the printer option.

  Click the Advanced tab, and then click new driver. Follow the dialog box until the sweepers list appears, select HP, and then select the HP Deskjet 6940 printer (it is alphabetic sorted by different printers series)... If there is no such clcik pilot the Windows Update icon and allow it some time to update, and then search the list once again appear.

  Follow the steps to complete the wizard and confirm a dialog window, then try to pritning with HP Deskjet 6940 replacement icon.

  You can see any difference?

  Shlomi