Printers HP officejet j145 does not install on Windows 7 Home Premium 64-bit

Similar Questions

• application of foxpro for Dos does not work under Windows 7 Home Premium 64-bit

  Dear Expert help me!

  My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit

  waiting for early response
  Thank you and regards

  SAIF Ali Sabri
  Faisalabad, Pakistan
  E-mail address is removed from the privacy *.
  + 923007960782

  16-bit applications are not taken charge/does not not on 64-bit Windows

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• Oblivion does not load on windows 7 Home premium 64-bit

  My game of the year oblivion edition does not load.  "I get a" problem with oblivion caused oblivion to close ' and 2 small black windows.  I tried to run it in Administrator as suggested by bethseda and compatibility mode.  I have an old three week computer has an Intel i7-860 2.8 GHz, 8 GB memory sdram ddr3 1333 mhz processor, with 1 GB ati radeon hd 4850 graphics card its integrated 7.1 which seems to meet the system requirements to run the game but the game won't load always.   Microsoft says that it is compatible with windows 7 so what causes this problem.

  You must also download the latest DirectX.

• Office 2003 does not work on Windows 7 Home Premium 64 - Bit

  I have two new computers that came pre-installed with W7HP 64 bit and both are pre-installed with the product obviously not commercial office 2007 which we do not want to use.  I own copies of Office 2003 and use these products on new computers.  I tried loading Office 2003 on a PC and had a lot of errors especially trying to run Outlook 2003.  I am now using Thunderbird as it works and really miss Word/Excel 2003 - (Office 2007 ribbons wah! what were you guys thinking!)

  I have also 16 bit score test programs written and compiled years using Quickbasic 4.5 specific use in my practice.  Any ideas on how I can get those pennies W7?

  I understand that there is a professional version of Windows 7 that integrates WOW64.  This will allow me to run Office 2003 (Outlook esp) without errors?

  Can I run programs QB4.5 with W7Pro?

  If Yes, please indicate how should I proceed?

  Peter Perros

  Gordon and Marilyn, thanks
  I now have my love Office 2003, I dare say - the best suite MS Office never exit.
  I'm so happy to see the end of these appalling ribbons and unnecessarily complex menus geeks...
  Kind regards
  Peter Perros
  Brisbane, Australia

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• updtes does not install on windows xp home edition 2002 service pack 2

  Hello

  After formatting window updtes do not install on windows xp home edition 2002 service pack 2

  Rabindra Nath Nandi

  HOW TO get a computer that is running Windows XP SP1 (a) or install SP2 fully patched after a cleaning
  https://groups.Google.com/Forum/?fromgroups#! msg/microsoft.public.windowsxp.general/quMfqk8Eb94/K93XrUGuZqAJ

  VERY IMPORTANT! => Step #4 links above, making resolution method #2 (No method no. 1) on this page: http://support.microsoft.com/kb/943144

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  More: http://aumha.net/viewtopic.php?f=62&t=44636

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Microsoft version multiscreen 1.5 does not work with windows 7 Home premium

  He says that it is not compatible with windows 7 Home premium, what should I use then?

  I'm not familiar with this program, you have a link where you download from, and details of the product etc. ?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  Windows Anytime Upgrade: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

• & Assistance does not work in Windows Vista Home Premium

  Hello
  I have a laptop HP Pavilion with Windows Vista Home Premium 32 bit. Whenever I try to run the help function or using the F1 key or the Start Menu > Help and Support, it returns a message:-"help topic not found this content under construction .

  We were able to retrieve the requested topic. »

  Can someone help me how to solve the problem?

  Thanks in advance

  Asif

  Hello Asif,

  Thank you for writing to Microsoft Vista Community Forums.

  Have you tried to run the command at the elevated command prompt? To run the command at the elevated command prompt, follow the steps below:

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get Windows Vista Home Premium 64-Bit installed on Windows 7 Home Premium 32 - Bit?

  I decided to install Windows 7 on my computer for the 30 day free trial, but am now regretting it. I don't have the money to buy the product officially, so I want to reinstall my windows vista. I have the drive, but when I try to install the computer says that this version of windows is not compatible with it. How can I get my Windows Vista to install?

  Also, I currently have windows 7 Home premium. It is a 32-bit operating system and is running on Service Pack 1. The version of windows that I am wanting to return is Windows Vista Home Premium 64-bit.

  I can't make the method for using the windows.old as my uncle decided to remove after installation of windows. I have 13, but even, I knew it was a bad idea. In any case, I would really help with this question.

  Ranging from 32-bit to 64-bit is a single proposal for a NEW facility.

  You can boot from the DVD and erase your old installation (wipe, from scratch, all not saved disappeared and everything must be installed manually - including drivers for hardware devices and software you have installed now) and install Windows Vista x 64.

• Windows Live Movie Maker does not start on Windows 7 Home Premium N

  Hello

  I tried to launch Live Movie Maker on Windows 7 Home Premium N when he asked WMVCore.dll. I guess that there is a link with the WMedia player not installed on this version of W7?

  Thank you

  Hello Cleynadi,

  Thank you for your message.  Please, click HERE and download the Media Pack for your version of Windows 7.  This should take care of the problems you are having.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Family Pack with upgrade 3 license code does not work for Windows 7 Home Premium

  I bought Windows 7 Home Premium, with upgrade license 3 Family Pack.

  Yes, it is a genuine Microsoft product, bought at best buy original and worked fine on another PC.
  I tried to update one of my HP Pavilion yesterday which came with Windows Vista. Installation works well, but at the point where he asks me the license code, he says, it's the bad code and there is nothing I can do to go.
  Help, please.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Draw Windows 6 by Micrografx wont install on Windows 7 Home premium 64-bit

  Just bought a Dell new with win 7 Home premium 64-bit, windows draw 6 will not be installed, this site offers somerapiddigger.com/micrografx -windows-draw-6- win 7 -64-bit-11143, for a price, of course, never heard of this? Heard talk I can up grade to win 7 pro & use the XP mode, I have my work whole buisness on windows drw 6 by micrografx

  Windows Draw 6 is almost twelve years - it is several lifetimes in the years of the computer.  The company itself no longer exists.  See here:

  http://www.Micrografx.com/

  "groundlevelpaint" wrote in the new message: * e-mail address is removed from the privacy... *

  Come to buy a Dell again with win 7 Home premium 64-bit, windows draw 6 install, this site offers/rapiddigger.com/micrografx-windows- draw- 6- win-7 - 64- bit-11143, for a price, of course, never heard talk about this? Heard talk I can up grade to win 7 pro & use the XP mode, I have my work whole buisness on windows drw 6 by micrografx.

• HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

  Hello HP community!

  I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

  Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

  I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

  I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

  Maybe someone has a suggestion how to fix this?

  I've already updated the version of the BIOS at 02.44 (later I could find).

  Thanks in advance!

  Yours sincerely Simon Cahill

  Beatsleigher,

  Not all memory is the same, even when picking PC2700. Did you buy non ECC?

  Here is a guide on the configuration of the memory for the D530SSF