printing on a desktop printer

Similar Questions

• HP envy printer range: HP envy with Win7 Remote Desktop RDP printing problem

  Hello

  I have a printer HP envy 5530 works well for my laptop.

  When I connect to my Win7 Remote Desktop Server (on which HP envy drivers are also installed) and try printing locally on my HP local printer, it does not work.

  When I look at my local mobile print queue, I see two copies of 'Remote Desktop redirected Printer Doc' contained in the queue. One of the queue said copies and then print. Impression size document in the print queue shows 4 KB that is abnormally low, then the missing documents from the print queue, but are not printed on the printer.

  Note that I have no problem with the same laptop, same Remote Desktop server, but using a different printer (not HP).

  I saw that on several forums (including this one), many users have this same problem but I've never seen a valid response that solves this problem with RDP.

  Any idea?

  Thank you

  I solved the problem by creating a new printer on the local computer and configure the port to the Standard TCP/IP port with the IP address of the printer and the HP Deskjet 6940 driver use. Deskjet 5500 driver may work as well.
  
  The problem is with the specific Envy 5530 driver.

• HP ENVY 5660: Connected printer & print desktop PC and tablet. Print & Scan doctor says he is not and cannot be.

  A couple of weeks ago, we changed Internet providers & I plugged our devices (desktop, tablets, phones & printer) in the new system.  We now have AT & T U-verse with a cable of optical fiber to a hub not far from our House & a circuit dedicated copper from there to the router/gateway. They claim that we have a regular service of Mgbps 18.

  Everything seems to work very well. We had anything drop and do not cause any problems. However, our range of printers HP says that it is connected to the Internet. It provides all the correct information and it works very well in our devices. But the Asus desktop computer insisted that the printer is offline, even if I print documents from him. Today, Windows did an update and when I checked the update report that he said he could not update the printer because it is in offline mode and it will not be printed. Then I printed something again.

  This update failure is my real problem. When I checked in the settings in Windows 10 on the desktop, it also insisted that the printer is offline. So I clicked on the icon of the application for the Print & Scan doctor. He also insisted the printer is not connected and that it is unable to connect from the Internet. Yet once again, the printer prints despite this reported disconnection.

  I don't know if the printer is actually updated even if update report says that it is not. I have had no problem since the printer from the reconnect the devices and printer or the update today. After I've done 4 or 5 tries to install the software with printing & Scan app, I checked in the settings of Windows 10 and again, he has insisted that the printer is offline.

  However, earlier, I checked in the settings, printers and scanners again in 10 Windows on the computer from Asus desktop & for the first time it reports "Series of 5660 HP ENVY (network)" & "Serial number (5660 HP ENVY series)" as the customs declaration.  The first says that it cannot print when I tried a test page; but, the other printed a test page. Is the first representative of the scanner and it cannot print because no document has been selected?

  When I created this Asus desktop / printer in February when I bought them, I did it using WIFI only, using no USB connection, to do and the printer has always worked our devices just as it continues to do so.

  Again, my real problem is declared failure to Windows 10 update.

  Thank you for taking the time to browse this message and I thank you for your help.

  Hello
  
  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• networking with windows xp desktop 2545 hp all-in-one printer

  I installed the printer on my laptop having windows7 home premium and wireless to the printer through D-Link router. I have a desktop with windows xp too and that you want to connect wireless on the same printer. The desktop computer equipped with an adapter for wi - fi D-Link and access to the router.

  How can I go about connecting to desktop wireless to the printer?

  Help, please. Thank you.

  It worked. Thanks a ton.

• HP Envy: I can't get my printer want print from my iPad or desktop.

  I can't get my printer to print from my computer. I reinstalled, does things for troubleshooting and can print ePrint but no Facebook, email or whatever it might be saved. Please help

  Hi @Dollgirl,

  Thank you for joining the HP Forums!

  I noticed your post that you can't get your HP Envy to print from your iPad or your office. I am pleased to see that for you!

  What is the model number for your HP Envy? How can I find my model or printer number?

  What is the operating system on the desktop, Windows or Mac? What version? http://www.whatsmyos.com.

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer? Copy of Documents.

  In the meantime, please try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope hear from you soon!

• HP LaserJet M1132 MFP: HP M1132 multifunction printer could not print from TS Win2008 (Remote Desktop), is that M1132 is based on the host system

  The logged-on user OS Win7 64 bit with M1132 MFP (usb). We have TS server with Win2008 64-bit OS installed. User to connect TS and runing application, then try printing with printer M1132 redirected pages, but nothing happened.

  We found the article below that explain the system based on host could not use remote desktop. M1132 does not appear (he has provied the hots-based driver for the printer).

  http://h20565.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00605333&lang=en&cc=us#N10078

  is there someone can let me know, this printer can be used for remote desktop or not? Thank you.

  Hello

  The HP Laserjet Pro M1132 is based on host printer indeed and consequences it only is not supported on Citrix / Terminal Services / RDP.

  You can find the specifications below:

  Standard printer languages: host-based

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA0-4644eee.PDF

  Also the following document list the LaserJet Pro M1130/M1210 MFP series ' ' as not supported include:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=4AA0-8465ENW

  Kind regards

  Shlomi

• HP Officejet J4580: printer connect not desktop

  Printer goes offline intermittently. Some pages are printed, and then it stops and I get error messages that there is no connection between the computer and the printer. I rebooted, check the updates of pilot, checked the cables and reinstalled (attempted) using a newly purchased HP disc. The cable is connected and the usb port works as I tried the other cable to be tested. The unit is plugged. Both devices are turned on. I get screens to print the test page; says it's printing, but nothing is being printed. On the page of the printer and devices, the device presents itself as printer and fax.

  It is a connected desktop computer, printer to the computer, without looking for wireless printing. My ISP is Comcast.

  Try the driver full features. (link)

  Uninstall the HP driver software.

  Unplug the printer.

• Can I connect my printer on both a desktop and a laptop wireless?

  I have my Photsmartf HP Premium printer connected to my Compaq desktop computer via a USB connection.   Also, I have a HP laptop with wireless and wonder if I can hang it up to the printer using the wireless connection?  Can I use the two types of connectivity with the same printer?

  OK, at the front of the printer: Setup > network > Wireless Setup Wizard.  Run the wizard to connect the printer to the network.

  Then, delete all instances of the printer on your PC (start > Control Panel > printers).  Then, add the printer in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Printer HP photosmart stopped scanning and desktop icon does not connect either

  I have recently switched to optical fiber for broadband connection.  I reset my printer to the new IP address and the fact that it is connected.  However I'm unable to scan.  I followed the procedures to help so I tried unplugging my firewall (not quite sure how but I disabled my security temporarily) but he has not yet worked.  I also tried double-clicking the desktop icon that is unresponsive.  Help!

  Hi there Sue!

  My next suggestion would be to uninstall the printer, restart the computer and reinstall.

  1. uninstalling the software of the printer (I recommend the method of control panel to uninstall)

  2. restart the computer to complete the uninstall

  3 Click here to download the complete driver. Once the download is complete, installation will start and then follow the on-screen instructions until the printer is completely installed. I hope that eventually you will be able to open the printer from your desktop software and start a new search.

  HP Photosmart full feature software and drivers

  I hope that works, my fingers are crossed for you!

  Let me know the results

• Server 2008 R2 Remote Desktop Server printing problems...

  Hello

  We have recently installed a Server 2008 r2 remote desktop server.  Everything works well except sometimes once a user has printed a large number of documents remotely a print job fails.  The only mistake he gives may not print.

  Once this problem starts they then won't even be able to print locally to a printer connected to the server.  The only way to solve the problem is to disconnect and turn it back on.

  We checked to see if the spooler is running, it is not a remote printing problem, that it does not start even local print will work for this user.  We also checked to make sure that the print queue is not an uptight work.

  How we solve this problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Using desktop remotely, I try to print on a printer different computers by the server and remote desktop. Does not

  With Server 2003, when you remotely connected with office, you could share your printers with everyone who has logged on to the server with the Office remotely and printed at the printing house they shared.  If the server had 10-12 different printers to that we could print.

  With 2012 the only printers that one session on the server is its own and the printers installed on the server.  We must be able to log in to the computer 1, with Imprimante1 and printing to the printer on computer 2, through desktop connection remote.

  Someone has suggestions I can see 2 printer who has logged the server with 1 computer?

  Oh, using the boxes of windows 7

  Todd

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Deskjet 3050 a-J611a - laptop wireless - wired desktop can print from it?

  I just bought the HP Deskjet 3050 a-J611a and installed wireless on my laptop. (the printer is in another room) We also have a desktop computer (my daughter her room) which is connected to the internet with a cable. I was wondering if it would be possible to also print from the desktop without having to use a USB Wifi key wireless or something. (the modem is right next to the computer if preferred we'd leave it plugged)  Maybe there is a way to print using the modem connection? Thanks in advance

  Hi Michelle150573,

  You can share the printer from the laptop, but the most reliable way to install it on the desktop would infest a USB wireless adapter and then install it wireless to his computer. Wireless USB adapters run from $ 10 to $ 30 on newegg.com

• How can I set the desktop icon to print something when I want something printed?

  I'm new on the internet and novice to computers.i would like and icon as if I was on windows xp when I hit print it would immediately and not send a file somewere.

  Find your printer in the start menu. All programs and right click. Send to desktop (create shortcut). CTRL + P will also feature a print job.

  I don't know what you mean by "send a file somewhere.

  A moderator will soon be along to move this thread to the appropriate forum such as this one is for the feedback: site forum only. Please note the forum, proposed future questions about this program or feature.

• Epson Desktop HP 2050 printer does not install

  Recently, I had a virus on my laptop and had to get it reprogrammed. Well, now my printer (Epson HP Desktop 2050) will not be installed. I tried the cd of installation, troubleshooting, and nothing works. Any advice?

  Saturday, December 15, 2012 16:46:35 + 0000, LYR82 wrote:

  I recently had a virus on my laptop

  What virus do you have? How did you know you had it?

  and had to get it reprogrammed.

  'Reprogram '? Exactly what do you mean by "reprogrammed"? What makes
  you think that's necessary? Who did it? Exactly what it does?

  Well, now my printer (Epson HP Desktop 2050)

  "Epson HP? Who was, Epson or HP (they are two different
  companies)?

  will not be installed.

  Please tell us what 'will not be installed' means. Exactly how are you
  are you still? What happens when you try? If you get an error message please
  He quotes verbatim.

  I tried the installation cd

  What version of Windows this? Did you go to the manufacturer's
  site Web and downloaded and installed the driver appropriate for that
  printer and the Windows version?

  Troubleshooting,

  What do you mean by "Troubleshooting"? Exactly what you do?

  Ken Blake, Microsoft MVP

• In the remote desktop while printing 2 or 3 pages printer usn suite. It is printing only first page. Pls help me solve this problem

  In the remote desktop printing 2 or 3 pages continuously. with the USB printer. It isn't printing first page only 2nd and 3rd pages. But in the task of the printer local special impression is get queue. It's like appear and disappear. Please help me solve this problem

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• Remote Desktop for Mac will not use the printer driver

  On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.

  I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.
  On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) Services
  We have tried to map the printer with an EPSONRedirect.INF file that contains the following:
  ; EPSONRedirect.INF

  ; Printer mapping file for drivers side client-side Server

  [Printers]

  "EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"
  No idea how we can fix this?
  [Transferred to the Windows forum by moderator]

  Hello

  I suggest you to post the question on the following link:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/f07d7d4a-BCCC-4c23-8BF3-c81d31937484/